![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2018
Location: Maidstone
Posts: 7
|
GreaseWeazle Help
I cant get my Greaseweazle to write to disk, tried different disks and different drives and the jumper is set to write enable..
Tried the "GW" software and WinUAE to no avail.. Writing c=0-79:h=0-1 Format amiga.amigados T0.0: Writing Track (Flux: 200.0ms period, 219.9 ms total, Terminate at index) T0.0: Writing Track (Verify Failure: Retry #1) T0.0: Writing Track (Verify Failure: Retry #2) T0.0: Writing Track (Verify Failure: Retry #3) ** FATAL ERROR: Failed to verify Track 0.0 AND Writing c=0-79:h=0-1 Format ibm.1440 T0.0: Writing Track (Flux: 200.0ms period, 220.0 ms total, Terminate at index) T0.0: Writing Track (Verify Failure: Retry #1) T0.0: Writing Track (Verify Failure: Retry #2) T0.0: Writing Track (Verify Failure: Retry #3) ** FATAL ERROR: Failed to verify Track 0.0 Many thanks |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
What Greaseweazle model do you have? What floppy drive do you have and what cable are you using (straight or PC crossover?) Describe your setup, or even better, show some pictures of it.
Are you using known good disks? Are they DD or HD disks. If HD disks, are you covering the HD hole? |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2018
Location: Maidstone
Posts: 7
|
I have the V4,
the Drives i tried are ... NEC - FD1231T Samsung - SFD-321B Its using a crossover ribbon cable, power cable and USB cable that were supplied with the Greaseweazle from AMIGAKIT used HD and DD disks covering holes and not covering holes. Tried with Maxell, TDK, Sony, Imation and unbranded disks Trying to format disk in WinUAE also fails when verifying GW Info :- Host Tools: v0.39 Device: Port: COM4 Model: Greaseweazle V4 Firmware: v1.1 Serial: xxxxxxxxxxxxxxxxxxxxxxxxxxxx USB Rate: Full Speed (12 Mbit/s) |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
Are you able to do a 'read' of a disk and save it as ADF (if AmigaDOS format) or as SCP?
Forget about WinUAE for now - you need to make sure you are able to read and write using the Greaseweazle software. |
![]() |
![]() |
#5 |
MI clan prevails
Join Date: Jul 2010
Location: Belgrade, Serbia
Posts: 1,443
|
Would a normal (staright) floppy cable work with Greaseweazle or is twisted kind a must?
|
![]() |
![]() |
#6 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,900
|
Sure, you just need to match the drive select to your setup.
If you have a normal PC drive, they're often locked to ds1 and are intended to be used with a twisted cable. If you use a straight cable, the drive won't answer to select 0 or drive a. |
![]() |
![]() |
#7 |
Registered User
Join Date: Jul 2018
Location: Maidstone
Posts: 7
|
I can read amiga disks and pc disks both 720 and 1440 and creating the ADF, IMG, and SCP files which i can verify that they work fine.
Thanx for the help btw ![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
|
![]() |
![]() |
#9 | |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
Quote:
1. Check that you have the write enable jumper connected on the GW v4 board. Maybe it is not writing, so the verification read back is not working. 2. If you use a HD disk, make sure you cover the HD hole, for reading and writing. 3. Write the image to disk as an SCP (with no verification) and read it back as SCP, and view in HxC Floppy Emulator Software. 4. Make sure you are using known good floppy disks. Inspect for mould/damage and clean if required. Use a strong neodymium magnet to wipe the disk - this sometimes help with any magnetic based issues. |
|
![]() |
![]() |
#10 | ||
MI clan prevails
Join Date: Jul 2010
Location: Belgrade, Serbia
Posts: 1,443
|
Quote:
Quote:
![]() |
||
![]() |
![]() |
#11 | |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
Quote:
|
|
![]() |
![]() |
#12 |
MI clan prevails
Join Date: Jul 2010
Location: Belgrade, Serbia
Posts: 1,443
|
Thanks
![]() I guess I'll be doing some trial and error once I complete my kit. We'll see how it goes... |
![]() |
![]() |
#13 |
Registered User
Join Date: Jul 2018
Location: Maidstone
Posts: 7
|
the latest ... I forced drive to be A by using --drive=A and it writes to disk ... even in WinUAE now ... although some programs dont like it very much
![]() Thanks for the help ![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Dec 2018
Location: UK
Posts: 1,716
|
The default for drive select should be "A", so this does not really make any sense.
|
![]() |
![]() |
#15 |
Registered User
Join Date: Jul 2018
Location: Maidstone
Posts: 7
|
must have been a blip .... its stopped writing again
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Apr 2012
Location: Manchester
Posts: 19
|
I have exactly the same issue as OP.
I have the greaseweazel V4, bought the twist cable from amigakit and can read amiga disks and play on winuae. I cannot write to disks either and get the same error. Writing c=0-79:h=0-1 Format ibm.1440 T0.0: Writing Track (Flux: 200.0ms period, 220.0 ms total, Terminate at index) T0.0: Writing Track (Verify Failure: Retry #1) T0.0: Writing Track (Verify Failure: Retry #2) T0.0: Writing Track (Verify Failure: Retry #3) ** FATAL ERROR: Failed to verify Track 0.0 Is there anything I can try please? I'm desperate to play lemmings on floppy |
![]() |
![]() |
#17 |
C= and Amiga aficionado!
Join Date: Jul 2017
Location: Italy
Posts: 325
|
This happened to me today!
Formatted first, then tried to rewrite a couple of original disks that weren't working anymore... after formatting one of them, every single write operation, even on known working floppies, failed miserably. I had to clean the floppy heads to restore full functionality. So I suspect the original, non working disks had mold issues (and I'll just keep them stored without inserting into any drive, it's not worth the hassle I think) |
![]() |
![]() |
#18 | |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,900
|
Quote:
If you're using hd disks, tape over the hd detect hole. |
|
![]() |
![]() |
#19 | |
Registered User
Join Date: Apr 2012
Location: Manchester
Posts: 19
|
Quote:
Either the floppy I have is a dud (I doubt) or all my floppies are not in shape. It is possible as I am using old disks and formatting them in Workbench. The disks are not HD just DD |
|
![]() |
![]() |
#20 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,900
|
Did it at least accept the correct format this time? In your previous log snippet it was thinking it was writing a PC HD floppy.
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Write option for greaseweazle | Planetinfinity | support.Hardware | 28 | 18 November 2022 23:38 |
GreaseWeazle problems | Nobby_UK | support.Hardware | 0 | 23 September 2021 15:30 |
Support Greaseweazle directly? | NLS | support.WinUAE | 19 | 01 September 2021 21:59 |
Floppy Drive on greaseweazle | Planetinfinity | support.Hardware | 17 | 11 August 2021 11:58 |
Greaseweazle confusion | Rissy | support.Games | 18 | 02 May 2021 20:33 |
|
|