English Amiga Board

Go Back   English Amiga Board > Support > support.Apps

Thread Tools
Old 09 June 2021, 10:46   #1
Registered User
Join Date: Apr 2011
Location: USA
Posts: 393
Workbench 3.1.4 incompatible with X-bEnCh 1.1 Final?

Dear all,
I just installed KS 3.1.4 ROM chips in my ESCOM A1200, and installed the new accompanying Workbench 3.1.4 OS, but to my surprise, when I install and run the X-bEnCh 1.1 Final, I get a RED Guru Meditation Error.

X-bEnCh 1.1 used to run fine when I was running the original KS 1.3 and WB 1.3.

Any ideas how to fix this?

Oh, and my A1200 is equipped with an: ACA 1230/56 accelerator:
c0dehunter is offline  
Old 05 July 2021, 12:02   #2
Registered User
woody.cool's Avatar
Join Date: Oct 2006
Location: Wakefield UK
Age: 39
Posts: 119
I had the same issue with OS 3.2 ROMs

Turns out, if you copy Execute from a 3.1 floppy into your C: assign, it'll fix the problem, this is because Execute is in ROM on 3.2 (and I assume on 3.1.4 as well) and Xbench is hard coded to call "C:Execute" during it's startup.

To do this (in case anyone needs this info) you can do it like this
  1. Hold the right mouse button and select Execute Command from the Workbench menu
  2. Type NewCLI and press enter
  3. Insert a Workbench 3.1 floppy disk
  4. type Copy DF0:C/Execute C: clone (substitute DF0: for the drive you're using)

Now you're done
woody.cool is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
minimig incompatible pic firmware romper support.Hardware 16 07 November 2014 01:12
PS2 pads incompatible? slowtide project.WHDLoad 5 03 June 2013 15:15
DOpus 4 Incompatible? Leandro Jardim support.Apps 3 17 February 2011 11:18
SystemPatch3 - WHDLoad preload incompatible? Shoonay support.Apps 19 07 January 2011 08:04
Incompatible Atari (dual) Joysticks? fc.studio support.Hardware 10 07 August 2008 23:01

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +2. The time now is 03:33.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Page generated in 0.06409 seconds with 15 queries