Warp3D Problem with Mediator SX, Voodoo3 & BPPC

[Turrican(AEB)]

Hi Amigafans,

i´ve problems with Warp3D. I hope one of you can help me ...

2 Months ago I got a BlizzardPPC 603+ 060/50MHz / PPC 240MHz / Rev 0.
I´ve installed my System completly new. All works fine but Warp3D.
The 68k Demos are working without problems. But on PPC-side only the
SMALL demo runs. The windowed and Fullscreen version don´t work and
the system crashes with a PPC-exeption.
I´m a little confused because the SMALL ppc-demo only works if i run
the 68k fullscreen demo before.

Any hint what to do?

This is the MedConfig-Report:


*** Envarc: variable settings: ***

MMU = No, previous setting: No

NoCache = Not Set, previous setting: Not Set

Emulation = No, previous setting: No

PatchInt = No, previous setting: No

VoodooMem = 15, previous setting: 15

VoodooInt = Yes, previous setting: Yes

Warp3D = No, previous setting: No

VirgeMem = Not Set, previous setting: Not Set

VirgeInt = Not Set, previous setting: Not Set

Gfxaddr = $80000000, previous setting: $80000000

Memsize = 16, previous setting: 16

FastEthernet = 0, previous setting: 0

tv.prefs file name = Not Set, previous setting: Not Set

Tuner = Not Set, previous setting: Not Set

Background = Not Set, previous setting: Not Set


*** Mediator System Files versions: ***

pci.library - ver.6.5 (8328 bytes)
PciInfo - ver.1.2 (8088 bytes)
MediatorNET.device - ver.2.8 (6076 bytes)
Voodoo.card - ver.4.26 (14692 bytes)
Virge.card - ver.1.7 (11936 bytes)
Vendors.txt - ver. info N/A (168164 bytes)
MedConfig - ver.1.4 (115575 bytes)

*** Mediator Multimedia CD Files versions: ***

FastEthernet.device - ver.1.15 (7116 bytes)
mixer.library - ver.1.9 (3976 bytes)
fm801.audio - ver.4.5 (4244 bytes)
FM801 - ver. info N/A (1180 bytes)
sb128.audio - ver.4.11 (6456 bytes)
SB128 - ver. info N/A (2032 bytes)
SBMixer - ver.1.4 (2004 bytes)
tv.library - file N/A
TV - file N/A
tv.vhi - file N/A

*** Spider Files versions: ***

poseidon.library - file N/A
spider.device - file N/A
DriveSpeed - file N/A

*** Warp 3D files versions: ***

Warp3D.library - ver.4.2 (67648 bytes)
Warp3DPPC.library - ver.4.2 (101020 bytes)

*** Warp 3D for A3/4000 files versions: ***

W3D_Picasso96.library - file N/A
W3D_Picasso96_PPC.library - file N/A
W3D_AvengerBE.library - file N/A
W3D_AvengerBE_PPC.library - file N/A
W3D_AvengerLE.library - file N/A
W3D_AvengerLE_PPC.library - file N/A

*** MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96MU.library - file N/A
W3D_AvengerBEMU.library - file N/A
W3D_AvengerLEMU.library - file N/A

*** NO_MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96M.library - ver.4.2 (12780 bytes)
W3D_Picasso96M_PPC.library - ver.1.0 (35292 bytes)
W3D_AvengerBEM.library - ver.4.2 (535304 bytes)
W3D_AvengerBEM_PPC.library - ver.4.2 (443516 bytes)
W3D_AvengerLEM.library - ver.4.2 (535388 bytes)
W3D_AvengerLEM_PPC.library - ver.4.2 (411612 bytes)

*** Other files versions: ***

AmigaOS ROM Update - ver.44.57 (321768 bytes)
rtg.library - ver.40.3945 (216548 bytes)
emulation.library - ver.40.389 (39652 bytes)
Picasso96API.library - ver.2.300 (24520 bytes)
ahi.device - ver.6.6 (83908 bytes)
68040.library - ver.5.95 (412 bytes)
68060.library - ver.46.8 (107560 bytes)
warp.library - ver.5.1 (21288 bytes)
ppc.library - ver.0.9 (70148 bytes)


model - , gfx - , zorro - , pcmcia - ,
serial - , ppc - , mmu030 - , mmulib - ,
nocache - , emulation - , warp3d - , pci - .


startup-sequence:

; $VER: Startup-Sequence_HardDrive 45.2 (19.1.2001)
; Startup-Sequence for AmigaOS 3.9

BPPCFix install 060 reboot >NIL:
MyUnitControl u=1 d=blizzppc.device r o=8 nrm dma
wildclick
CMQ060
C:morelibspace

If EXISTS C:SquirrelSCSI
C:SquirrelSCSI
EndIf

Set SCSIUpdate 1
If EXISTS C:IDEFix
C:IDEFix
Set SCSIUpdate 0
EndIf
If EXISTS SYS:Expansion/XSurfIDE
Set SCSIUpdate 0
EndIf
If EXISTS SYS:Prefs/Env-Archive/NOSCSIUPDATE
Set SCSIUpdate 0
EndIf
If $SCSIUpdate EQ 1
SetPatch QUIET
Else
SetPatch SKIPROMUPDATES "scsi.device" QUIET
EndIf
Unset SCSIUpdate

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVSOSDrivers/~(#?.info)

C:LoadMonDrvs

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET
C:afa_os_loader
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs
SYS:WBStartup SYS:Tools SYS:Tools/Commodities

SYS:System/REXXMast >NIL:

IF EXISTS S:User-Startup
Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

Run >NIL: PowerIcons
C:LoadWB
EndCLI >NIL:


PciInfo report:


Pci Device 1:
VendorID: $121a
VendorName: 3dfx Interactive Inc
DeviceID: $5
DeviceName: Voodoo3 All Voodoo3 chips, 3000
ClassCode: $30000
RevisionID: $1
InterruptPin: 1
SubsystemVendorID: $121a
SubsystemID: $57
MemSpace0: $80000000 - $81ffffff
MemSpace1: $82000000 - $83ffffff
IOSpace2: $eb6000 - $eb60ff
RomSpace: $84000000 - $8400ffff

Pci Device 2:
VendorID: $1319
VendorName: Forte Media, Inc.
DeviceID: $801
DeviceName: FM801 Xwave PCI audio controller
ClassCode: $40100
RevisionID: $b2
InterruptPin: 2
SubsystemVendorID: $1319
SubsystemID: $1319
IOSpace0: $eb6400 - $eb647f

Pci Device 3:
VendorID: $1319
VendorName: Forte Media, Inc.
DeviceID: $802
DeviceName: FM801 Xwave PCI Joystick
ClassCode: $98000
RevisionID: $b2
InterruptPin: 0
SubsystemVendorID: $1319
SubsystemID: $1319
IOSpace0: $eb6800 - $eb680f

Pci Device 4:
VendorID: $10ec
VendorName: Realtek Semiconductor
DeviceID: $8139
DeviceName: RT8139A/B/C Fast Ethernet Adapter
ClassCode: $20000
RevisionID: $10
InterruptPin: 1
SubsystemVendorID: $10bd
SubsystemID: $320
IOSpace0: $eb6c00 - $eb6cff
MemSpace1: $84010000 - $840100ff


ShowConfig report:

PROCESSOR: CPU 68060/68060fpu/68060mmu
CUSTOM CHIPS: AA NTSC Alice (id=$0033), AA Lisa (id=$00F8)
VERS: Kickstart version 45.57, Exec version 45.0, Disk version 45.3
RAM: Node type $A, Attributes $405 (FAST), at $70000000-$7FEFFFFF (255.0 meg)
Node type $A, Attributes $703 (CHIP), at $4000-$1FFFFF (~2.0 meg)
BOARDS:
Board (Index Information Ltd): Prod=2206/40($89E/$28) (@$EA0000 128K)
Board (Index Information Ltd): Prod=2206/168($89E/$A8) (@$200000 4meg)
Board + ROM (HD?) (phase 5): Prod=8512/110($2140/$6E) (@$F00C38 128K)


and this ist the PPC-exeption:


PowerPC Data access exception (store operation)
Memory protection violation - Access to 00000000
The excepting instruction is located at 71D2BE28
Task name: 'Background CLI_PPC11' Task address: 70A32DD0 Task ID:105

SRR0: 71D2BE28 SRR1: 0000F070 MSR: 00003040 HID0: 0040C000
PVR: 00070201 DAR: 00000000 DSISR: 0A000000 SDR1: 70C0003F
DEC: 0000E574 TBU: 00000000 TBL: 4287072F XER: 00000000
CR: 20000044 FPSCR: 82008000 LR: 71D2BD5C CTR: 71D2A890

R0-R3: 000183DC 70A3BAC0 70A3C2A8 81E00000 IBAT0: 00000000 00000000
R4-R7: FFDFFFFC 000001FF 7E000008 71BFB128 IBAT1: 00000000 00000000
R8-R11: 00000004 71D7E254 00EA0000 00000000 IBAT2: 00000000 00000000
R12-R15: 8041FE07 71BBB068 71B47444 709CC5F4 IBAT3: 00000000 00000000
R16-R19: 70A3BD40 0000004C 00000000 00000000 DBAT0: 00000000 00000000
R20-R23: 00000000 71B40000 71B40000 71B40000 DBAT1: 00000000 00000000
R24-R27: 71B40000 000000C8 71D7E24C 71BBB068 DBAT2: 00000000 00000000
R28-R31: 71BBB308 00000000 71D7E190 70A3BAC0 DBAT3: 00000000 00000000

F0-F3: 1.0000 E 0 -1.0000 E 0 1.0000 E 0 0
F4-F7: 0 1.0000 E 0 0 0
F8-F11: 0 0 0 0
F12-F15: -2.0010 E 0 -2.0010 E 0 0 0
F16-F19: 0 0 0 0
F20-F23: 0 0 0 0
F24-F27: 0 0 0 0
F28-F31: 0 0 0 0

Warp-OS 2001 by Sam Jordan

[AMIGAZ]

Try without using any WB backdrop/wallpaper, Warp3D needs lots of free RTG memory....and you only have 8mb of it when using the A1200 mediator

[Turrican(AEB)]

Originally Posted by AMIGAZ

Try without using any WB backdrop/wallpaper, Warp3D needs lots of free RTG memory....and you only have 8mb of it when using the A1200 mediator

This hint is hot
When i disable my wallpaper the small and windowed demo runs without problems. But when i try the fullscreen version, i still get a grey screen and the system freezes ...

Are there more possibilites to get more free RTG-RAM?

Also, you could try setting the Memory Window jumper to 8mb (seems from showconfig that yours is set to 4mb) and then play with your env vars, some are wrong for your configuration. For example:
powerpc/gfxaddr should be $200000
warp3d/mediator/memsize should be 7

[Turrican(AEB)]

Originally Posted by zerostress

Also, you could try setting the Memory Window jumper to 8mb (seems from showconfig that yours is set to 4mb) and then play with your env vars, some are wrong for your configuration. For example:
powerpc/gfxaddr should be $200000
warp3d/mediator/memsize should be 7

That´s it !!!!
I´ve set the Memory Window Jumper to "8MB" and changed "warp3d/mediator/memsize" to 7. In "powerpc/gfxaddr" i´ve tried the values "$200000" and "$80000000" (Memspace0 from pciinfo). With both values even the fullscreen Demo works.

Before ich set the Jumper to 8MB i got only 2,44MB of RTG-Memory. Even without Wallpaper. After changing the Jumper now i have 4MB available with a resolution of 1024x768 @16bit