REtroArch PUAE and Zorro III card

[spannernick]

Dose anyone know how to set its ram properly and Zorro 3 in Retroarch PUAE, I change it and it keeps showing...

Unsupported graphics card memory size 400000 (0)!
Unsupported Zorro III fastmem size 100000 (0)!

Do I need to use a special kickstart so it see the card or is any 3.1 rom ok...?
and
Can PUAE use P96...?

This is what's in the uae file under memory.

; Memory
fastmem_size=8
a3000mem_size=0
z3mem_size=1
z3mem_start=0x10000000
bogomem_size=0
chipmem_size=4
rtg_nocustom=true
rtg_modes=0x112
gfxcard_size=4

Here is the rest of the UAE file if you want to see it

config_description=Config settings
config_hardware=true
config_host=true
config_version=2.8.1
; common
use_gui=yes
show_leds=true
;
; Kickstart
kickstart_rom_file=/tmp/pcu/extragames/Amiga/uae4arm/kickstarts/kick31.rom
kickstart_rom_file_id=1483A091,KS ROM v3.1 (A1200)
kickstart_ext_rom_file=
flash_file=
;
; Floppy Drives
floppy0=
floppy1=
floppy1type=-1
floppy2=
floppy3=
nr_floppies=0
floppy_speed=100
;
; Sound

sound_output=exact
sound_channels=stereo
sound_stereo_separation=7
sound_stereo_mixing_delay=0
sound_frequency=44100
sound_max_buff=2048
sound_interpol=none
sound_filter=off
sound_filter_type=standard
sound_volume_cd=20
cachesize=0
;
; Contoller and Mouse
joyport0=mouse
joyport0autofire=none
joyport1=joy0
joyport1autofire=none
;
; Other
bsdsocket_emu=false
synchronize_clock=false
kbd_lang=us
;
; Screen Setup
gfx_framerate=3
gfx_width=704
gfx_height=568
gfx_top_windowed=0
gfx_left_windowed=0
gfx_width_windowed=704
gfx_height_windowed=568
gfx_width_fullscreen=800
gfx_height_fullscreen=600
gfx_refreshrate=50
gfx_refreshrate_rtg=50
gfx_backbuffers=2
gfx_backbuffers_rtg=1
gfx_vsync=false
gfx_vsyncmode=normal
gfx_vsync_picasso=false
gfx_vsyncmode_picasso=normal
gfx_lores=false
gfx_resolution=hires
gfx_lores_mode=normal
gfx_flickerfixer=false
gfx_linemode=double
gfx_fullscreen_amiga=false
gfx_fullscreen_picasso=false
gfx_center_horizontal=smart
gfx_center_vertical=smart
gfx_colour_mode=32bit
gfx_blacker_than_black=false
gfx_api=directdraw
gfx_api_options=hardware
;
; CPU
cpu_speed=max
cpu_throttle=0.0
cpu_type=68040
cpu_model=68040
fpu_model=68040
cpu_compatible=true
cpu_24bit_addressing=true
cpu_cycle_exact=true
blitter_cycle_exact=true
cycle_exact=true
cachesize=16384
; 
; *** Chipset
; 
immediate_blits=false
fast_copper=false
ntsc=false
chipset=aga
chipset_refreshrate=50
collision_level=playfields
rtg_nocustom=true
rtg_modes=0x502
;rtg_modes=0x212
log_illegal_mem=false
kbd_lang=us
state_replay_rate=0
;
; Memory
z3mapping=real
fastmem_size=8
a3000mem_size=0
z3mem_size=1
z3mem_start=0x10000000
bogomem_size=0
chipmem_size=4
rtg_nocustom=true
rtg_modes=0x112
gfxcard_size=4

[sonninnos]

P96 is not enabled, and the versions that can use Z3 memory have the option available as a core option.

[twenty90seven]

Originally Posted by sonninnos

P96 is not enabled, and the versions that can use Z3 memory have the option available as a core option.

Is it possible to use Picasso 96 in PUAE in Retroarch? When you say that P96 is not enabled, do you mean that it does not work at all, or has not been enabled in the config given in the post above?

[sonninnos]

I meant enabled in the code, as in it does not build, meaning that configs won't do anything.

[twenty90seven]

Originally Posted by sonninnos

I meant enabled in the code, as in it does not build, meaning that configs won't do anything.

Ok no worries, hopefully someone builds support for Picasso96 in the future for Retroarch.