30 January 2024, 02:49 | #161 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,039
|
I cannot say as i cannot test it because i don't have it, but it has been this way since 4.0 to squeeze in 384MB of PPC memory max. If it worked before it should still work. I just saw somebody on an another board asking what happened with 128MB of his Radeon memory.
Radeons with 1 aperture of 256MB will still show 256MB. Some radeons have a jumper for this. |
02 February 2024, 09:48 | #162 | |
Registered User
Join Date: Sep 2022
Location: Berlin
Posts: 11
|
Hello,
regarding the Prometheus PCI soundcard topic: Quote:
The CT4780 "Soundblaster Live!" is recognized in: - prmscan - OpenPCIInfo - pcibusinfo The embedded sounddriver in AHI V6 lists the card in AHI prefs and I can perform a "test sound" (-> it beeps)! HURRAY I thougt, BUT there is nothing more than that "beep". If I start AmigaAMP and play a song - its only this "beep" again - no sound ;-( Am I missing a thing? Several people reported this card as working... Interstingly "OpenPCIInfo" prompts out the following: [...] Device : EMU10000 Sound Blaster Live! (Also Live! 5.1) - OEM from DELL - CT4780 [...] Might the "OEM from DELL" be the killing part, as those OEM cards are reported not to work?! My system config: Prometheus Board (with DMA Firmware): Manufacturer ID: 0x0e3b (3643) Product ID : 0xc8 (200) RTL8139 NIC - working! with OpenPCI PPC Apocalype - working with "sonnet.library" Voodoo 3 (Avenger) - working with "3dfxVoodoo.chip" (Tooltype: DMAsize=2048k) & Soundblaster Live! - ??? Terratec 512i - ??? (someone told me, it wont work anymore with the DMA Firmware) Any hints or suggestions are welcome. Best regards Doc Leisure Last edited by Doc Leisure; 02 February 2024 at 10:51. |
|
02 February 2024, 10:00 | #163 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,039
|
What engine do you use with AmigaAMP? Internal/external/mpeg library....
Did you set the correct device number of AHI? PPC or 68k Version 2 or version 3 of AmigaAMP |
02 February 2024, 10:37 | #164 |
Registered User
Join Date: Sep 2022
Location: Berlin
Posts: 11
|
Hello,
I use the latest version AmigaAMP ("AmigaAMP 3.34 (68k/OS3)") with the "ppc-warpOS.engine" in PlugIns ("WarpUP decoding engine 3.0") for the PPC Board. This works flawlessly with PAULA AHI-mode(s) - so I guess it works. Soundcard wise I have chosen for the AHI device #2 "EMU10000 stereo" (dont remember the exact phrase) mode and for AHI device #3 "EMU10000 stereo++" mode. And the device numbers are also chosen in the AmigaAMP prefs accordingly. --> PAULA output (AHI device #0) works on A4000 mainboard chinch --> EMU10000 output (AHI device #2 and / or #3) result in a "beep" on the soundcard output - as long as AmigaAMP is opened (if closed the "beep" ends) Is there anything obviously wrong in my setup? Best regards Doc Leisure Last edited by Doc Leisure; 02 February 2024 at 12:38. |
03 February 2024, 09:34 | #165 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,039
|
Prometheus.library version and .card version?
|
03 February 2024, 16:21 | #166 |
Registered User
Join Date: Sep 2022
Location: Berlin
Posts: 11
|
Hello Hedeon,
the versions I use are: - prometheus.library = 4.5 - prometheus.card = 7.601 - emu10kx.card = 6.5 I tried a setup with the soundcard only (68k & mpega.library) - no change, still only the "beep"... Best regards Doc Leisure |
03 February 2024, 19:50 | #167 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,960
|
Quote:
Is it ven_1102&dev_0006? Last edited by grelbfarlk; 03 February 2024 at 20:00. |
|
04 February 2024, 13:10 | #168 |
Registered User
Join Date: Sep 2022
Location: Berlin
Posts: 11
|
|
04 February 2024, 16:11 | #169 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,039
|
I seem to have version 6.10 of the SB driver. I'll send it to you.
|
04 February 2024, 18:15 | #170 |
Registered User
Join Date: Sep 2022
Location: Berlin
Posts: 11
|
Hi Hedeon,
thanks for your hint. I managed to find the "emu10kx.card = 6.1" in an older beta archive of AHI (m68k-amigaos-ahiusr-6.0rc3.lha). I exchanged the "emu10kx.audio" to version 6.1 and later the complete AHI installation, without success. Unfortunately nothing changed. Maybe I have a "wrong" soundblaster card - are the "known good" one that definitely work? Best regards Doc Leisure |
04 February 2024, 20:21 | #171 | |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,039
|
Quote:
Last edited by Hedeon; 04 February 2024 at 20:30. |
|
04 February 2024, 20:31 | #172 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,039
|
And I seem to have ahi.device 6.7
|
05 February 2024, 09:20 | #173 |
Registered User
Join Date: Sep 2022
Location: Berlin
Posts: 11
|
Hello Hedeon,
This did the trick!!! - Thank you very much! My Soundblaster Live! is up and running :-) --> "emu10kx.card = 6.10" (post #171) in combination with --> "ahi.device = 6.7" works! Best regards Doc Leisure Last edited by Doc Leisure; 05 February 2024 at 11:30. |
05 February 2024, 10:09 | #174 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,039
|
I am confused, did you update ahi.device ? Or did you made a typo with 6.1 and you meant 6.10?
|
05 February 2024, 11:25 | #175 |
Registered User
Join Date: Sep 2022
Location: Berlin
Posts: 11
|
Hello Hedeon,
sorry for the confusion - I read you ">" sign in the wrong way... "emu10kx.card = 6.10" (from your post #171) is the newest one. I used that one and I also updated my "ahi.device" to Version 6.7 to match your setup best (as you posted in #172). I corrected my post. Thanks for clarification. Best reagards Doc Leisure Last edited by Doc Leisure; 05 February 2024 at 11:36. |
05 February 2024, 12:21 | #176 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,039
|
Good to know, also for future questions Have fun with your sfx card.
|
05 February 2024, 15:43 | #177 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,039
|
I got this pci to pcie 16x adapter card from ebay that seems to work. 10b5 8112 (vendor/device). No cards bigger than 1x to test but 1x seems to work. Crashes when no card is plugged in. Not sure if that can be fixed (bus error).
But for people that want to test 2x and higher cards. |
08 March 2024, 02:49 | #178 |
Registered User
Join Date: May 2023
Location: Dortmund
Posts: 16
|
Thanks. This made my SBLive work.
However, I have another issue: when my 68060 is set to 100MHz, the 8139 Adapter stops responding shortly after use. At 50MHz it works Fine. Since the Setup is proven and has no issues, I think this is Not related to a Problem with the overclocked CPU. Any ideas? |
11 May 2024, 04:51 | #179 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,960
|
What do you use for a mixer on Prometheus supported AHI cards?
I usually would use Ghostmix under Mediator. Where can I find the Arakattack key? I figure I'll use a USB card for moving stuff to this system, and I'd like to see whether the Arakattack driver supports more stuff than HID input and mass storage devices. |
31 May 2024, 04:21 | #180 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,960
|
Got an NEC Spyder card working with it, had to put it in the bottom slot as it didn't like the top slot, which because of the A4091, was on a little PCI riser thing.
OpenUSB worked while PrometheusUSB did not. Was able to test under Sysspeed with a USB flash drive, got about 1.0MB/s read/write, rawread was suspiciously lower at .75MB/s. Tried some random USB Ethernet adapter with asixethusb.device. Miami and Genesis seemed to start it ok, it showed traffic, but I suspect my fancy router is not playing nicely with it as I couldn't connect to anything in a browser or over FTP. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best Practices in Localizing a Program? | tygre | Coders. General | 3 | 29 December 2018 05:38 |
Looking for prometheus.library v3.0 | jarob | request.Apps | 0 | 19 January 2012 10:31 |
Best practices for direct hardware programming ? | weiju | Coders. Asm / Hardware | 27 | 31 October 2011 13:10 |
Prometheus vs Mediator? | wXR | Hardware mods | 3 | 26 December 2010 20:33 |
Prometheus in A4000T | Boot_WB | Hardware mods | 32 | 05 September 2009 20:44 |
|
|