Uae4arm (arm jit)

[lubomyr]

Originally Posted by liveevil

RP9 works on JIT v1 now as well and I'm starting to like them as they also set the correct configuration and screen resolution.

I copied that code from JITv2 version

[lubomyr]

Comparison ARM JITv1 vs JITv2 in Benchmarks
device: Commodore Pet (Android 5.0, 3gb ram, CPU MT6752 8xCortex A53 1.7 Ghz)

SysInfo:
Dhystrones 101564 158674
Mips 106.01 165.63
MFlops 5.01 4.95

SysSpeed:
MIPS 70.85 1395.32
MFLOPS 8.09 8.34

AIBB:
EmuTest 60.67 86.11
WritePixel 48.30 71.13
Sieve 93.25 114.37
Dhystrone 63.71 97.85
Sort 57.18 74.24
EclipseTest 6.12 6.27
Matrix 132.41 197.24
IMath 106.45 138.06
MemTest 170.02 253.33
TGTest 2.80 2.91
Linetest 2.94 3.02
Savage 73.91 109.61
FMath 62.21 80.31
FMatrix 94.42 146.15
BeachBall 91.01 133.57
InstTest 58.79 103.51
Flops 71.44 108.53
TransTest 72.91 111.43
FTrace 77.38 112.61
CpixTest 47.07 69.11

[liveevil]

Lubomyr, I need you to test something. Turn on the status line and load something that doesn't have sound. Does your status line say 60 ? This also happens when playing something with sound (the status line says 50 which is correct) and if you turn off sound emulation the status line changes to 60 ! I asked TomB about this and he said its probably something to do with the port. This has been like this in all versions I think.

I also tested JIT 2 with ClassicWB and when opening a drive on the WB I get a Software Failure message. It works OK if you turn off JIT. I told TomB but haven't heard anything yet.

[lubomyr]

liveevil,
I tried to run some games and apps but saw status only 50 or 49

[liveevil]

Originally Posted by lubomyr

liveevil,
I tried to run some games and apps but saw status only 50 or 49

Even if you disable the sound emulation in the options ?

[lubomyr]

Originally Posted by liveevil

Even if you disable the sound emulation in the options ?

Even with disabled sound status is same 49-50

[liveevil]

Originally Posted by lubomyr

Even with disabled sound status is same 49-50

Does UAE4Arm have VSync ? Or some sort of audio/video sync ?

[Higgy]

I just tried running the new build on my Pine64 running Android 5.1.1

It loads but once the keyboard appears for save config etc I cannot make it disappear so I cannot get any further

I suppose the OUYA was a half way house. It had a touch pad on the controller so it sort of worked. Where as the Pine64 is much more of a PC.

[lubomyr]

Higgy,
Try uae4arm-jit2-beta-android-08052016-aminipc.apk
(version where virtual keyboard not appears on screen when selected textfield in menu, only for device with hw keyboard)

[lubomyr]

Originally Posted by liveevil

I also tested JIT 2 with ClassicWB and when opening a drive on the WB I get a Software Failure message. It works OK if you turn off JIT. I told TomB but haven't heard anything yet.

I tested ClassicWB Full with JITv2 version. I opened drive System and not saw any failure messages. As for me all works correct.

Are you sure that you used version released 08.05 (not from 07.05) ?

[liveevil]

I completely missed that last update, that's what it was, I installed the 07.05 version of JIT 2 which has a hard drive bug. Works with 08.05.

[karamoon]

Thank you for all the android emulators lubomyr!, they work great.

[Higgy]

Originally Posted by lubomyr

Higgy,
Try uae4arm-jit2-beta-android-08052016-aminipc.apk
(version where virtual keyboard not appears on screen when selected textfield in menu, only for device with hw keyboard)

I have had a play. I can now use the main uae4arm menu small thing is 'shift' does not work so I cannot type in capitals or use symbols. It is fine in the Amiga environment.

The mouse does not seem to work. I might need to play some more and follow OUYA instructions.
After a little tweeking I got the joystick fire working well. My test here is SWOS as quick press is 'pass' and holding fire button is 'shoot'.

Thanks for your work.

[lubomyr]

Higgy,
'shift' does not work also in virtual keyboard. This is limitation of guichan library.
For moving of mouse pointer you must enable tick on 'Move mouse with joystick or trackball' via starup SDL-settings (Mouse emulation, Advanced features)
You can also remap any buttons of your device to left or right mouse click via starup SDL-settings ('Remap physical keys'->'Show all keycodes'-> MOUSE_LEFT or MOUSE_RIGHT)

Hi Lubomyr
Im using your uae4all2 for some time, and now uae4arm is even better. Thanks for this support.
Im also tried your amikit app with amiga forever system files, and its ok kinda slow (it is with e-uae right?) on my old tablet. In pyra-handheld.com uae4arm beta topic u said that you are using amikit with latest beta uae4arm jit2.
I tried configure amikit with latest uae4arm jit2, but got some error, seams resolution is wrong, cant set it to 640x512. I just tried add amikit.hdf and amiga forever system files folder to uae4arm and got some errors.
Can you give some tips how to setup amikit with uae4arm?

[lubomyr]

Cytryn,
Amikit app uses e-uae.
Current version of uae4arm is mostly compatible with amikit except screenmode settings.
You must create file screenmode.prefs (with 32bit P96 uaegfx 800x600) (via uae4arm) and copy it to amikit hardfile (path Prefs/Env-Archive/Sys).
Or you can download already prepared file screenmode.prefs and copy it to amikit hardfile into folder Prefs/Env-Archive/Sys

Cant get it to work.
Here are screens with errors/failure etc in uae4arm but same amikit.hdf working good with your amikit app (e-uae).

[lubomyr]

Cytryn,
Did you try to replace file screenmode.prefs ?
It cannot works without it. Please read carefully my previous post.

I tried but there is no folder Env-Archive in prefs.

[lubomyr]

Cytryn,
That's impossible. Without it amikit cannot run even via amikit app
my screenshot (prefs directory) https://dl.dropboxusercontent.com/u/...10-224816.jpeg