![]() |
![]() |
#1301 |
Registered User
Join Date: Oct 2017
Location: Slovakia
Posts: 42
![]() |
Hi everyone,
I have problem with Sonnet I would like to some tips from you. My situation: I tested some today ago my new 3x64MB EDO DIMMs RAM 2K Refresh. I tested 1x64, 2x64 and all together 3x64 MB RAM. Still I receive the ramlib error 80000004 after activating the powerpc.library. Once I had there all three RAMs first I saw the error PPC CPU not responding and then I received ramlib error. So, I would like to ask you how much max RAM size is now supporting 2x64 MB or also 3x64MB = 192 MB or not? All RAM slots on sonnet card is active and working for Amiga? Why I do not see all 192 MB RAM after ramlib error crash? I have CyberstormMK II 060/50 MHz + 128 MB RAM FAST + 16 MB on board + Radeon memory. So, TOTAL 128 + 16 + 232 = 376 MB can I see in WorkBench OS.3.9. And when I added 3x64 MB RAM then I see in WB 505 MB FastRAM but after inicializing the card then I receive ramlib error with error code 80000004. If I have 3x64 MB on Sonnet board then I had to see on Workbench toatl cca 568 MB Fast RAM and not 505 MB after ramlib crashing. So, where can I have the problem? Sonnet working with the Radeon card and I have the version with 256 MB RAM and I use 24 MB for gfx card and next RAM can I see in WorkBench. Maybe there is problem? If I use all 256 MB RAM for gfx card then maybe I do not see this ramlib error? What do you mean? Or working only with Voodo3, 4, 5 cards properly? User declare that working also with Radeon gfx correctly. I have use the following cards in mediator with 3x64MB RAM on sonnet card and I have there soldered 3,3 regulator LT 1085 CT 3,3V. Please, see the listing from pciinfo command: Pci Device 1: VendorID: $10ec VendorName: realtek pcıe gbe family controller DeviceID: $8029 DeviceName: 8172 Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC ClassCode: $20000 RevisionID: $0 InterruptPin: 1 SubsystemVendorID: $10ec SubsystemID: $8029 IOSpace0: $40c06000 - $40c0601f Pci Device 2: VendorID: $1002 VendorName: Advanced Micro Devices, Inc. DeviceID: $5c63 DeviceName: RV280 (M9+) Mobility Radeon 9200 ClassCode: $30000 RevisionID: $1 InterruptPin: 2 SubsystemVendorID: $1002 SubsystemID: $26 MemSpace0: $60000000 - $6fffffff IOSpace1: $40c06100 - $40c061ff MemSpace2: $70000000 - $7000ffff RomSpace: $70100000 - $7011ffff Pci Device 3: VendorID: $1274 VendorName: Ensoniq DeviceID: $1371 DeviceName: ES 1371 Creative AudioPCI (ES1371,ES1373) ClassCode: $40100 RevisionID: $8 InterruptPin: 3 SubsystemVendorID: $1274 SubsystemID: $1371 IOSpace0: $40c06200 - $40c0623f Pci Device 4: VendorID: $1033 VendorName: NEC Electronics DeviceID: $35 DeviceName: udp9210 Dual OHCI controllers plus Single EHCI controller ClassCode: $c0310 RevisionID: $41 InterruptPin: 4 SubsystemVendorID: $1033 SubsystemID: $35 MemSpace0: $70200000 - $70200fff Pci Device 5: VendorID: $1033 VendorName: NEC Electronics DeviceID: $35 DeviceName: udp9210 Dual OHCI controllers plus Single EHCI controller ClassCode: $c0310 RevisionID: $41 InterruptPin: 1 SubsystemVendorID: $1033 SubsystemID: $35 MemSpace0: $70300000 - $70300fff Pci Device 6: VendorID: $1033 VendorName: NEC Electronics DeviceID: $e0 DeviceName: 0x1033 USB 2.0 Host Controller ClassCode: $c0320 RevisionID: $2 InterruptPin: 2 SubsystemVendorID: $ee4 SubsystemID: $89e MemSpace0: $70400000 - $704000ff Pci Device 7: VendorID: $1057 VendorName: Motorola DeviceID: $4 DeviceName: MPC107 PCI Bridge/Memory Controller for PPC ClassCode: $e0001 RevisionID: $12 InterruptPin: 1 SubsystemVendorID: $0 SubsystemID: $0 MemSpace1: $70500000 - $70500fff Thanks for your answer and for tips, that how can I resolve my problem. Last edited by DH; 17 November 2017 at 13:27. Reason: Deleted direct signature |
![]() |
![]() |
#1302 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,069
|
The PPC sets up the memory. If the PPC fails, then no memory is added. Only 128 MB is supported if anything else than a voodoo 3 is used. Any memory above that is not added.
Why do you expect to see memory added I when the system crashes? Something obviously went wrong. It is not clear to me whether you get the requester which says PPC not responding every time. If so, then the PPC is not responding meaning maybe faulty card/mod. |
![]() |
![]() |
#1303 | |
Registered User
Join Date: Oct 2017
Location: Slovakia
Posts: 42
![]() |
Sonnet
Hi,
thanks for answer. I had only once or twice this issue with PPC is not responding. Always I have this issue that when I see the request with ramlib error and then I clicked to WB desktop then I see there RAM which is on Sonnet card but when I click the cancel button in this request then memory disappear from WB. Quote:
|
|
![]() |
![]() |
#1304 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 3,010
|
Going to move my new compile stuff over to this thread:
http://eab.abime.net/showthread.php?t=88760 Bermuda Syndrome WOS is up on EAB's FTP, if you use the search just search for my name. Also new (old) version of ScummVM 0.11.1 coming hopefully. I have it working it a couple games but not ScummVM engine ones which is the majority of what that old version supports. |
![]() |
![]() |
#1305 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,069
|
@Joe
What does snoopdos tell you when you start initppc up until the ramlib crash? |
![]() |
![]() |
#1306 |
Registered User
Join Date: Oct 2017
Location: Slovakia
Posts: 42
![]() |
Sonnet crescendo Ramlib Error.
Hi Hedeon,
Workbench starting completly and then I see the ramlib error. I do not see any special info from SnoopDOS, I see when is powerpc.library is loaded then I see this request with ramlib error. I do not what is wrong. Last edited by DH; 17 November 2017 at 13:26. Reason: Deleted direct signature |
![]() |
![]() |
#1307 | |
Registered User
Join Date: Dec 2012
Location: Vancouver/Canada
Posts: 678
|
Quote:
![]() ![]() ![]() ![]() ![]() Where is DOSBOX and exult in aminet? ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() |
![]() |
#1308 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,069
|
You start initppc from startup-sequence? You have powerpc.library in libs: or somewhere else?
|
![]() |
![]() |
#1309 |
Registered User
Join Date: Sep 2015
Location: London, UK
Posts: 424
|
@Joe: have you followed the first time install guide on the wiki, based on a fresh install?
|
![]() |
![]() |
#1310 |
Registered User
Join Date: Oct 2017
Location: Slovakia
Posts: 42
![]() |
Sonnet Crash
Hi Wrangler,
you mean this install guide: https://github.com/Sakura-IT/SonnetA...allation-guide Yes, I saw this guide and I followed it but I thing I have to try it again. I see there card with DeviceName: MPC107 PCI Bridge/Memory Controller for PPC But I cannot use these commands InitPPC and GetInfo because befor this still I receive RamLib error 80000004 and then these commands do not work when I click on cancel request window. Maybe I have to reinstall it again. Last edited by DH; 17 November 2017 at 13:26. Reason: Deleted direct signature |
![]() |
![]() |
#1311 |
Registered User
Join Date: Oct 2017
Location: Slovakia
Posts: 42
![]() |
Sonnet Crash
No, I do not start InitPPC from Startup-Sequence.
I wanted to run IntiPPC manually from WB but when the WB loaded and SnoopDos said that powerpc.library was loaded OKAY then I see error request with RamLib Error 80000004. So, I cannot to use next steps for using commands InitPPC and GetInfo. I used this install guide: https://github.com/Sakura-IT/SonnetA...allation-guide I see that there is a card with DeviceName: MPC107 PCI Bridge/Memory Controller for PPC But I cannot use these commands InitPPC and GetInfo because befor this still I receive RamLib error 80000004 and then these commands do not work when I click on cancel request window. Maybe I have to reinstall it again. p Last edited by DH; 17 November 2017 at 13:26. Reason: Deleted direct signature |
![]() |
![]() |
#1312 |
Registered User
Join Date: Sep 2015
Location: London, UK
Posts: 424
|
@Joe: you either need powerpc.library in libs: and InitPPC (early) in your startup-sequence or neither - you can't have the lib in libs: but no InitPPC for instance or you will get a crash.
|
![]() |
![]() |
#1313 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,367
|
Joe, make a folder in Libs: called PowerPC. Place the PowerPC.library in there. Make an assign for PowerPC.library to Libs:PowerPC
Then make a script on your desktop that calls initppc Last edited by trixster; 05 November 2017 at 16:51. |
![]() |
![]() |
#1314 |
Registered User
Join Date: Oct 2017
Location: Slovakia
Posts: 42
![]() |
Sonnet crescendo Ramlib Error.
Hi,
I have powerpc.library in libs. For now still investigate where can I have the problem. When I try boot without a startup-seqeuence and when I enter the following commands: Setpatch NOROMUPDATE makedir RAM:ENV assign ENV: RAM:ENV copy ENVARC:#? to ENV: ALL c:loadmondrvs Then after a few seconds I see the request with the same error: RamLib error 80000004. So, I cannot following next step for using: C:InitPPC and C:GetInfo Do you have some next tips for me? Thanks for your help. Last edited by DH; 17 November 2017 at 13:26. Reason: Deleted direct signature |
![]() |
![]() |
#1315 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 3,010
|
You installed an LT1085, are you sure you installed it correctly? Can you post pictures, one from above and one from the side? The top pin is not connected to the pad right? The top pin of the LT1085 is only connected to the ground at C21?
Quote:
|
|
![]() |
![]() |
#1316 | |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,069
|
Quote:
Looks to me the radeon driver crashes. |
|
![]() |
![]() |
#1317 |
Registered User
Join Date: Oct 2017
Location: Slovakia
Posts: 42
![]() |
Sorry, my mistake. I thing that this little script executed ok, but if I run InitPPC the I see RamLib error. If I remove the sonnet card then everything working fine. If I have there sonnet card and do not have powerpc.library in libs, then everything ok. After inicialising powerpc.library I see RamLib Error.
Anyway radeon working fine without sonnet. |
![]() |
![]() |
#1318 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,069
|
Then please answer Greg's question. I revert to my previous hunch: Card/mod faulty.
do you have ppc.library in libs: ? Last edited by Hedeon; 07 November 2017 at 23:02. Reason: Added ppc.library question |
![]() |
![]() |
#1319 |
Registered User
Join Date: Oct 2017
Location: Slovakia
Posts: 42
![]() |
Sonnet Crash
Hi,
I will add photo from Sonnet on friday afternoon because I am not at home now. And yes, I have currently powerpc.library in libs: ppc.library I do not have in libs: because I do not have CyberstormPPC The sonnet card is new and I thing that card is not faulty, must be ok. Last edited by DH; 17 November 2017 at 13:25. Reason: Deleted direct signature |
![]() |
![]() |
#1320 |
Registered User
Join Date: Oct 2017
Location: Slovakia
Posts: 42
![]() |
Hi,
Setpatch NOROMUPDATE makedir RAM:ENV assign ENV: RAM:ENV copy ENVARC:#? to ENV: ALL c:loadmondrvs When I remove the powerpc.library from libs and start this script without Startup-Sequence this script working for me without problem. But if I have powerpc.libary in libs then after start the command InitPPC I see after a few seconds RamLib error 80000004 request with cancel or reboot button. Last edited by DH; 17 November 2017 at 13:25. Reason: Deleted direct signature |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
WANTED: PCI Sound Card VORTEX2 SuperQuard / SQ2500 or Turtlebeach SantaCruz pci card | keropi | MarketPlace | 12 | 15 March 2017 02:48 |
Wanted:Sonnet Technologies QuadDoubler 50 (Doubler 4000) | kronuz | MarketPlace | 0 | 16 June 2013 00:29 |
eBay : Sonnet Quaddoubler | alexh | MarketPlace | 3 | 07 May 2013 00:50 |
Overlay problem on GeForce 7200 | Leandro Jardim | support.WinUAE | 1 | 10 August 2010 15:50 |
Prometheus PCI & Voodoo 3 PCI GFX Card | Slayer | support.Hardware | 21 | 05 September 2006 10:57 |
|
|