RaspberryPI uae4all2 discussion - Page 6

ransom1122 · 12 March 2015, 09:46

My Pi 2 never gets blacks screens.

As for sound drivers NO!?!? I havent done that what exactly do I type to achieve this? Just remember I am complete Noob-a-lishious with Linux, so do a step by step of what to type to install drivers. (Oh and when they install where exactly does it install? On the micro SD Card?)

Higgy · 12 March 2015, 10:19

Hi,

Try here:

http://cagewebdev.com/index.php/rasp...audio-working/

It does go onto the mircoSD card.

Also once you have a good installation, remember to back it up on your PC. If anything goes wrong you can just copy the image back again onto your micro sd card.

Use Win32DiskImager, and select read instead of write. Zip file afterwards as 16GB card will be 16GB even if it is only 10% full. Or if your PC has loads of space don't worry

ransom1122 · 12 March 2015, 10:42

did it, the wav test worked ok, i reboot with the mame4all sd card image i have, and NO SOUND

the image is a read only, so before i installed the drivers i typed
sudo rwenable
then did what you told me
then sudo reboot

and nothing no audio whatsoever?

Mark36 · 12 March 2015, 11:11

Quote:

Originally Posted by ransom1122

Higgy, OK that worked, WOW 1st time im hearing sound from 3.5mm jack, Finally,

Though slightly off track, i have a custom 16gb image of mame4all with all roms which is set to read only. How do i fix that to work with sound.

I tried at prompt

sudo rwenable
sudo raspi-config (forced 3.5mm audio)
sudo reboot

and I get no sound? pleeeeeze how ?

I have to use a 4 pole 3.5 jack with my RPI2 to get audio out. Its good they use 4 pole jack as it carries video too so you can hook it up to a crt tv. But older headsets and stuff is not compatible with 4 pole. I used my old analogue camcorder lead it carries video and audio from 3.5 jack.

Just googled and the sudo command to force audio out 3.5 jack
sudo amixer cset numid=3 1

ransom1122 · 12 March 2015, 11:43

Mark. I've typed that command. Then did a sudo reboot and no sound with mame4all. Yet if I boot retropie on another sdcard sound works.

Also I have the 4 pole jack plug. And yes ive tried yellow rca as red too.

ransom1122 · 14 March 2015, 00:20

Yes this is the command that worked for 3.5jack analogue audio

sudo amixer cset numid=3 1

Though my problem was after I had typed this and did a reboot the command wasn't active. So I included the command in the script of the boot with my mame4all sdcard. And now it works.
Thanks to all who have helped me.

P.s Mark I have an old camcorder cable as well with a yellow rca. I need to replace red rca with yellow rca to get stereo. But that's ok.

Further testing using the analogue rcas on a powered amp. I'm hearing a low hiss (white noise) sound during gameplay with mame4all. A bit of research shows you can buy a usb to3.5jack adaptor which eliminates the noise and or play with volume setting in amixer I think. Drop it down to 50% then increase the volume on the amp.
HDMI doesn't get the hiss sound.

Anyone else with issues or a simple fix?

Higgy · 14 March 2015, 09:44

I found this yesterday on main RPi forum -
The firmware guys asked me to try adding "disable_audio_dither=1" to config.txt This does seem to have stopped the "HISS" but it does have a downside in that "In effect you get slightly more distortion without dither than with."

So give it a try and report back your findings...

I hope a better fix will be along later.

- end of message.

I hope that helps, Higgy

ransom1122 · 14 March 2015, 10:13

either that or a $5 usb adaptor. Ill try your commands tomorrow, if anyone else tries in the meantime post results. Thanks Higgs

ransom1122 · 15 March 2015, 09:00

Quote:

Originally Posted by Higgy

I found this yesterday on main RPi forum -
The firmware guys asked me to try adding "disable_audio_dither=1" to config.txt This does seem to have stopped the "HISS" but it does have a downside in that "In effect you get slightly more distortion without dither than with."

So give it a try and report back your findings...

I hope a better fix will be along later.

- end of message.

I hope that helps, Higgy

Higgs, I tried "disable_audio_dither=1" command and it seems after testing Aliens (World) game I found a better sound without the hiss. I tried a few other games and all seem to play better.

I think Ill keep this command with my mame4all from now on.

Many thanks..

liveevil · 02 May 2015, 16:34

I just bought a Pi 2 and installed Retro-Pie 3.0 beta 2. I tried UAE4All2 but when I choose a resolution of 640 and above I get massive black bars at the top and bottom of the screen. If I choose 320 resolution it looks fine but really blocky. What's going on ? Is this an old version of UAE4All ? Is there a way to fix it ? Thanks.

Mark36 · 03 May 2015, 18:19

Quote:

Originally Posted by liveevil

I just bought a Pi 2 and installed Retro-Pie 3.0 beta 2. I tried UAE4All2 but when I choose a resolution of 640 and above I get massive black bars at the top and bottom of the screen. If I choose 320 resolution it looks fine but really blocky. What's going on ? Is this an old version of UAE4All ? Is there a way to fix it ? Thanks.

I use chips version of uae4all2 0.5

The joypad support is very good now ps3 / 360

Uae4all2 for Raspberry Pi by Chips
A fast and optimized Amiga Emulator

Version history:

V0.5:
Enable CPU frequency emulation above 28 Mhz.
Resolution set by command line option is working.
Add Sony six axis workaround.
Add joystick hat support.

V0.4:
enable screen resolution change in guichan.
enable vkeybd: now Left shift is Fire button of joystick

V0.3:
Now two binary: one for Raspberry Pi 1 and another one for Raspberry Pi 2 (Neon enabled)
Switch to gcc 4.8 compiler instead of 4.6.
Solve the emulator stuck at exit.

V0.2:
Merge of latest AGA improvement from TomB.
Add command line parameter management. Just write any wrong parameter to get the list of them

V0.1:
Original version

liveevil · 03 May 2015, 18:36

Quote:

Originally Posted by Mark36

I use chips version of uae4all2 0.5

The joypad support is very good now ps3 / 360

Uae4all2 for Raspberry Pi by Chips
A fast and optimized Amiga Emulator

Any idea how to install it in Retro-Pie ?

Mark36 · 03 May 2015, 19:19

Quote:

Originally Posted by liveevil

Any idea how to install it in Retro-Pie ?

I followed this thread and used putty to install dependencies.

https://www.raspberrypi.org/forums/v...e4all2#p742563

glue · 20 June 2015, 15:40

Hi.

Im seeking solutions to work keyboard LED USB with UAE4all2 (KEYRAHV2 and Amiga 1200 keyboard or USB PC KEYBOARD), I would like to LEDs on the keyboard could be used in WinUAE as CAPS LOCK POWER NUMLOCK as DF0.

Any chance?

Boom^ · 14 July 2015, 13:20

I'm holding out for some awesome awesome dude (whom im more than happy to contribute money to) to make an awesome rpi2 SD Card image that just boots to an Amiga with everything working sweet

I wait and hope

Hiddenevil · 14 September 2015, 16:09

Hey guys

I'm using 'Chips' compiled binary on my RPI B and everything is working reasonably well, except for one issue I can't seem to solve, it wont save the configuration. After I've setup the emulator how I want it, if I then quit and reload, UAE4ALL will forget everything I told me it had saved when I clicked the save button.

trixster · 15 September 2015, 11:06

Have you made a config directory?

Samurai_Crow · 15 September 2015, 11:26

Quote:

Originally Posted by trixster

Have you made a config directory?

...and is the directory writable with user-level permissions? (This is under Linux, after all.)

Mark36 · 17 September 2015, 08:00

Quote:

Originally Posted by Hiddenevil

Hey guys

I'm using 'Chips' compiled binary on my RPI B and everything is working reasonably well, except for one issue I can't seem to solve, it wont save the configuration. After I've setup the emulator how I want it, if I then quit and reload, UAE4ALL will forget everything I told me it had saved when I clicked the save button.

Save as the default config that should work and move on to uae4arm if you can.

Amiga1992 · 17 September 2015, 20:16

Is there any version of UAE4ALL that I control with a joypad? Needing a mouse and/or a keyboard seems rather stupid.
I tried whatever version that came with Retropie 3.0, and I was annoyed that I had to connect a mouse to navigate the UI, and then I started the machine and nothing worked and wanted to go back to the menu and realized the joypad, again, would not go back to the menu

14 March 2015, 00:20	#106
ransom1122 Registered User Join Date: Aug 2011 Location: Omnicorp Age: 45 Posts: 5,880	Yes this is the command that worked for 3.5jack analogue audio sudo amixer cset numid=3 1 Though my problem was after I had typed this and did a reboot the command wasn't active. So I included the command in the script of the boot with my mame4all sdcard. And now it works. Thanks to all who have helped me. P.s Mark I have an old camcorder cable as well with a yellow rca. I need to replace red rca with yellow rca to get stereo. But that's ok. Further testing using the analogue rcas on a powered amp. I'm hearing a low hiss (white noise) sound during gameplay with mame4all. A bit of research shows you can buy a usb to3.5jack adaptor which eliminates the noise and or play with volume setting in amixer I think. Drop it down to 50% then increase the volume on the amp. HDMI doesn't get the hiss sound. Anyone else with issues or a simple fix? Last edited by ransom1122; 14 March 2015 at 00:25.

14 September 2015, 16:09	#116
Hiddenevil Registered User Join Date: Feb 2014 Location: Sheffield, England Posts: 245	Hey guys I'm using 'Chips' compiled binary on my RPI B and everything is working reasonably well, except for one issue I can't seem to solve, it wont save the configuration. After I've setup the emulator how I want it, if I then quit and reload, UAE4ALL will forget everything I told me it had saved when I clicked the save button. Last edited by Hiddenevil; 14 September 2015 at 16:21.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Uae4All2-SDL Amiga Emulator for Android	lubomyr	support.OtherUAE	702	05 October 2022 23:26
HDFs not working in uae4all2	OscarBraindeaD	support.OtherUAE	8	28 February 2015 16:32
UAE4All2 on an android "non-touch device"	KombatSanta	support.OtherUAE	0	27 February 2014 17:08
Help getting sleepwalker working in uae4all2	spellcaster	support.Games	2	06 December 2013 21:07
ROM Discussion...	derSammler	project.EAB	41	29 January 2008 23:36

12 March 2015, 09:46	#101
ransom1122 Registered User Join Date: Aug 2011 Location: Omnicorp Age: 45 Posts: 5,880	My Pi 2 never gets blacks screens. As for sound drivers NO!?!? I havent done that what exactly do I type to achieve this? Just remember I am complete Noob-a-lishious with Linux, so do a step by step of what to type to install drivers. (Oh and when they install where exactly does it install? On the micro SD Card?)

12 March 2015, 10:19	#102
Higgy Registered User Join Date: Jan 2014 Location: Somerset, UK Posts: 547	Hi, Try here: http://cagewebdev.com/index.php/rasp...audio-working/ It does go onto the mircoSD card. Also once you have a good installation, remember to back it up on your PC. If anything goes wrong you can just copy the image back again onto your micro sd card. Use Win32DiskImager, and select read instead of write. Zip file afterwards as 16GB card will be 16GB even if it is only 10% full. Or if your PC has loads of space don't worry

12 March 2015, 10:42	#103
ransom1122 Registered User Join Date: Aug 2011 Location: Omnicorp Age: 45 Posts: 5,880	did it, the wav test worked ok, i reboot with the mame4all sd card image i have, and NO SOUND the image is a read only, so before i installed the drivers i typed sudo rwenable then did what you told me then sudo reboot and nothing no audio whatsoever?

12 March 2015, 11:43	#105
ransom1122 Registered User Join Date: Aug 2011 Location: Omnicorp Age: 45 Posts: 5,880	Mark. I've typed that command. Then did a sudo reboot and no sound with mame4all. Yet if I boot retropie on another sdcard sound works. Also I have the 4 pole jack plug. And yes ive tried yellow rca as red too.

14 March 2015, 09:44	#107
Higgy Registered User Join Date: Jan 2014 Location: Somerset, UK Posts: 547	I found this yesterday on main RPi forum - The firmware guys asked me to try adding "disable_audio_dither=1" to config.txt This does seem to have stopped the "HISS" but it does have a downside in that "In effect you get slightly more distortion without dither than with." So give it a try and report back your findings... I hope a better fix will be along later. - end of message. I hope that helps, Higgy

14 March 2015, 10:13	#108
ransom1122 Registered User Join Date: Aug 2011 Location: Omnicorp Age: 45 Posts: 5,880	either that or a $5 usb adaptor. Ill try your commands tomorrow, if anyone else tries in the meantime post results. Thanks Higgs

02 May 2015, 16:34	#110
liveevil Custom User Title Join Date: Jan 2008 Location: UK Posts: 331	I just bought a Pi 2 and installed Retro-Pie 3.0 beta 2. I tried UAE4All2 but when I choose a resolution of 640 and above I get massive black bars at the top and bottom of the screen. If I choose 320 resolution it looks fine but really blocky. What's going on ? Is this an old version of UAE4All ? Is there a way to fix it ? Thanks.

20 June 2015, 15:40	#114
glue Banned Join Date: Dec 2006 Location: https://t.me/pump_upp Posts: 76	Hi. Im seeking solutions to work keyboard LED USB with UAE4all2 (KEYRAHV2 and Amiga 1200 keyboard or USB PC KEYBOARD), I would like to LEDs on the keyboard could be used in WinUAE as CAPS LOCK POWER NUMLOCK as DF0. Any chance?

14 July 2015, 13:20	#115
Boom^ Registered User Join Date: Sep 2009 Location: Estepona, Spain Posts: 38	I'm holding out for some awesome awesome dude (whom im more than happy to contribute money to) to make an awesome rpi2 SD Card image that just boots to an Amiga with everything working sweet I wait and hope

15 September 2015, 11:06	#117
trixster Guru Meditating Join Date: Jun 2014 Location: England Posts: 2,356	Have you made a config directory?

17 September 2015, 20:16	#120
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,654	Is there any version of UAE4ALL that I control with a joypad? Needing a mouse and/or a keyboard seems rather stupid. I tried whatever version that came with Retropie 3.0, and I was annoyed that I had to connect a mouse to navigate the UI, and then I started the machine and nothing worked and wanted to go back to the menu and realized the joypad, again, would not go back to the menu

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)