New project - Fúria EC020 - Page 6

hese · 31 August 2013, 16:37

Quote:

Originally Posted by Boboo_SK

About fifty pieces.

I'm interested in one. Where do you take orders?

Boboo_SK · 02 September 2013, 11:23

Pre-ordering please write on private message.
Thank!

28 September 2013, 01:05

Today tested Furia with Amiwolf, Adoom. All works fine on stock clock. Boboo big thanks

jack-3d · 30 September 2013, 10:35

Yes it worked, but I would say you need to have it OC to really enjoy playing such complex games.

Anyway I am looking forward to have it in my A600, its really nice piece of HW.

lukassid · 30 October 2013, 09:56

Can we expect Furia 020 before Christmas?

arti040 · 06 November 2013, 18:56

Have a question before i'll do an order - does memory is also fragmented/divided to many little fragments as in ACA620 happens, so running any Mac emulator is impossible?

lukassid · 06 November 2013, 20:25

I'm not an expert but it's the same EC 020 with it's fatal memory limitations

amigoun · 06 November 2013, 23:58

Memory is not fragmented, I managed to run ShapeShifter with Fúria EC020 without problems.

arti040 · 07 November 2013, 09:12

Uh, how's that? Two different opinions

@amigoun
How the biggest memory block can you reserve for Mac?

amigoun · 07 November 2013, 14:22

As far as I remember well (I was beta-testing the accelerator cca 1 month ago) you can allocate as much as 7 MB to mac emulation or so depending on how much consumes your system. Max largest block is 8 MB.

mikele · 08 November 2013, 10:11

7 mb for old Mac b&w stuff should be fine. I used to had PowerBook 170 with just 8 MB of RAM (with virtual mem off) and run pretty much everything up to mid 90s. Just settle with System 6 or stripped down 7. If you have Graffiti or IndyECS and want to use 8-bit graphics apps, the 020 might be a bottle neck.

Boboo_SK · 13 November 2013, 20:04

New update Glue Logic, speed up CPU same clock rate 28 MHz up to 19%. New DRAM controller - Zero Wait State.

jack-3d · 13 November 2013, 20:21

Wow, that memory is fast! I still dont get how it is possible to beat 030/25 with 020/28. Anyway I know it is NOT fake, I saw it for real and I must take off my cap to your skills. Looking forward to have one of these in my A600 ;o)))

robinsonb5 · 13 November 2013, 20:44

Quote:

Originally Posted by jack-3d

Wow, that memory is fast! I still dont get how it is possible to beat 030/25 with 020/28.

I think you just answered your own question

NovaCoder · 14 November 2013, 02:46

Cool, how's this board running AmiWolf with these updates?

arti040 · 26 November 2013, 22:57

Does anybody have a contact to @Boboo_SK? I'm trying to PM him since 10 days but w/o any success

lukassid · 26 November 2013, 23:21

Look on Czech and Slovakian forums. He's only coming here from time to time.

arti040 · 27 November 2013, 09:21

Well, to register on forum in completley foreign language only to make an order for Furia... quite bad idea i think

Predseda · 27 November 2013, 09:51

Keep calm, Boboo now finishes a batch of pre-paid Furias for supporters and he also ordered new PCBs for a new batch. After all pre-paids are processed, he will come here to offer his cards for sure.

arti040 · 27 November 2013, 10:09

OK. Thanks for an info

28 September 2013, 01:05	#103
venox Posts: n/a	amiwolf,adoom Today tested Furia with Amiwolf, Adoom. All works fine on stock clock. Boboo big thanks

07 November 2013, 09:12	#109
arti040 Piotr Join Date: Jul 2013 Location: Lodz/Poland Age: 40 Posts: 207	Uh, how's that? Two different opinions @amigoun How the biggest memory block can you reserve for Mac? Last edited by arti040; 07 November 2013 at 09:29.

13 November 2013, 20:04	#112
Boboo_SK Develop HW Join Date: Jul 2011 Location: Nitra / Slovakia Posts: 104	Update logic New update Glue Logic, speed up CPU same clock rate 28 MHz up to 19%. New DRAM controller - Zero Wait State.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2x New Low Cost Turbo Card for A600 "Fúria"	venox	Amiga scene	80	14 November 2012 11:38
TotalCalc and EC020 FPU bug?	Leandro Jardim	support.WinUAE	5	25 February 2012 20:25
The ST-01 Project	HideawayStudio	Amiga scene	16	29 July 2008 19:54
Project One	rygar	request.Old Rare Games	2	27 November 2007 01:20

02 September 2013, 11:23	#102
Boboo_SK Develop HW Join Date: Jul 2011 Location: Nitra / Slovakia Posts: 104	Pre-ordering please write on private message. Thank!

30 September 2013, 10:35	#104
jack-3d kLiker Join Date: Mar 2011 Location: Brno / Czech Republic Posts: 371	Yes it worked, but I would say you need to have it OC to really enjoy playing such complex games. Anyway I am looking forward to have it in my A600, its really nice piece of HW.

30 October 2013, 09:56	#105
lukassid Registered User Join Date: Oct 2012 Location: Surrey Posts: 390	Can we expect Furia 020 before Christmas?

06 November 2013, 18:56	#106
arti040 Piotr Join Date: Jul 2013 Location: Lodz/Poland Age: 40 Posts: 207	Have a question before i'll do an order - does memory is also fragmented/divided to many little fragments as in ACA620 happens, so running any Mac emulator is impossible?

06 November 2013, 20:25	#107
lukassid Registered User Join Date: Oct 2012 Location: Surrey Posts: 390	I'm not an expert but it's the same EC 020 with it's fatal memory limitations

06 November 2013, 23:58	#108
amigoun Registered User Join Date: May 2010 Location: Czech Rep Posts: 599	Memory is not fragmented, I managed to run ShapeShifter with Fúria EC020 without problems.

07 November 2013, 14:22	#110
amigoun Registered User Join Date: May 2010 Location: Czech Rep Posts: 599	As far as I remember well (I was beta-testing the accelerator cca 1 month ago) you can allocate as much as 7 MB to mac emulation or so depending on how much consumes your system. Max largest block is 8 MB.

08 November 2013, 10:11	#111
mikele Registered User Join Date: Dec 2009 Location: poland Posts: 307	7 mb for old Mac b&w stuff should be fine. I used to had PowerBook 170 with just 8 MB of RAM (with virtual mem off) and run pretty much everything up to mid 90s. Just settle with System 6 or stripped down 7. If you have Graffiti or IndyECS and want to use 8-bit graphics apps, the 020 might be a bottle neck.

13 November 2013, 20:21	#113
jack-3d kLiker Join Date: Mar 2011 Location: Brno / Czech Republic Posts: 371	Wow, that memory is fast! I still dont get how it is possible to beat 030/25 with 020/28. Anyway I know it is NOT fake, I saw it for real and I must take off my cap to your skills. Looking forward to have one of these in my A600 ;o)))

14 November 2013, 02:46	#115
NovaCoder Registered User Join Date: Sep 2007 Location: Melbourne/Australia Posts: 4,408	Cool, how's this board running AmiWolf with these updates?

26 November 2013, 22:57	#116
arti040 Piotr Join Date: Jul 2013 Location: Lodz/Poland Age: 40 Posts: 207	Does anybody have a contact to @Boboo_SK? I'm trying to PM him since 10 days but w/o any success

26 November 2013, 23:21	#117
lukassid Registered User Join Date: Oct 2012 Location: Surrey Posts: 390	Look on Czech and Slovakian forums. He's only coming here from time to time.

27 November 2013, 09:21	#118
arti040 Piotr Join Date: Jul 2013 Location: Lodz/Poland Age: 40 Posts: 207	Well, to register on forum in completley foreign language only to make an order for Furia... quite bad idea i think

27 November 2013, 09:51	#119
Predseda Puttymoon inhabitant Join Date: Mar 2007 Location: Tromaville Age: 46 Posts: 7,562	Keep calm, Boboo now finishes a batch of pre-paid Furias for supporters and he also ordered new PCBs for a new batch. After all pre-paids are processed, he will come here to offer his cards for sure.

27 November 2013, 10:09	#120
arti040 Piotr Join Date: Jul 2013 Location: Lodz/Poland Age: 40 Posts: 207	OK. Thanks for an info

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)