02 July 2023, 22:14 | #81 |
The Big White Cat
Join Date: Jan 2005
Location: France
Age: 45
Posts: 829
|
Hum... 46.0 works on 3.1 but freeze on 3.9 with CF or SD. I don't understand
Perhaps a timing issue but hard to know. Your version allow FMV access with HDD with minor freeze (appears sometimes) With SD or CF, freeze when workbench appears . What has the FMV module to do with scsi.device ? Could it be a memory timing problem because FMV share memory address if i remenber well that's why only 4Mo are allowed on SX-1 with FMV The OS3.9 BB2 scsi.device fix 8Mo memory problem on SX-1 but freeze when acces to FMV Do you know what changed between the 43.45B and 46 that could do freeze and interfer with the use of FMV ? |
02 July 2023, 22:52 | #82 | |
Registered User
Join Date: Jan 2008
Location: Warsaw/Poland
Age: 56
Posts: 2,050
|
Quote:
For OS 3.9 You can start without startup-sequence. later enter c:type s:startup-sequence and enter every line from startup-sequence, one by one. You will be know where is problem. Maybe commodities, WBStartup or something similar. |
|
03 July 2023, 03:09 | #83 |
Registered User
Join Date: Jan 2008
Location: Warsaw/Poland
Age: 56
Posts: 2,050
|
I remember one fix for this version, no Max Transfer problem.
But I never tested this because i dont have access to HD where this problem occured. Then You can change MaxTransfer value to every value and check if minor freeze occured. Also for HD You can use V46.1, is perhaps the fastest, and no minor freeze can occured, i think. |
03 July 2023, 10:08 | #84 |
Registered User
Join Date: Aug 2010
Location: Italy
Posts: 855
|
@Don_Adan
I just tested v46.0 and v46.1 on my A1200 + Blizzard 1230 IV + 60 ns RAM + CF on IDE port. v46.0 turned out to be the fastest (also with respect to v43.x): SysInfo results (b/s): * v46.0 / without IDEFix: 1941807 * v46.0 / with IDEFix: 2032124 * v46.1 / without IDEFix: 1927829 * v46.1 / with IDEFix: 2026886 Great job, thank you! |
03 July 2023, 19:59 | #85 | |
Registered User
Join Date: Jan 2008
Location: Warsaw/Poland
Age: 56
Posts: 2,050
|
Quote:
|
|
04 July 2023, 21:34 | #86 | |
Registered User
Join Date: Aug 2010
Location: Italy
Posts: 855
|
Quote:
I just tried to copy a 14814708 bytes file from CF to RAM, and both with v46.0 and v46.1 it took about 11 seconds. By the way, the FS is PFS3AIO; the OS (I forgot to mention it in my previous post) is 3.9. Also, I made a few tests with SCSIBench using 16 and 64 kB transfer blocks: again v46.0 performed a bit better (about 10 kb/s more). |
|
05 July 2023, 00:04 | #87 |
Registered User
Join Date: Jan 2008
Location: Warsaw/Poland
Age: 56
Posts: 2,050
|
Ok, seems to be dependent to something else. Here is info from my betatester:
https://eab.abime.net/showpost.php?p...1&postcount=68 |
03 August 2023, 14:35 | #88 |
The Big White Cat
Join Date: Jan 2005
Location: France
Age: 45
Posts: 829
|
Is the scsi.device 46.0 LBA 48bit compatible, for use with drive >128Gb ?
I use a 256GB SD Card I can see partitions below 128 Gb but those which are above are marked Uninitialized, altough they are filled with full of stuff Does someone has tested with disks >128GO ? Last edited by Rochabian; 03 August 2023 at 17:29. |
03 August 2023, 17:44 | #89 | |
Registered User
Join Date: Jan 2008
Location: Warsaw/Poland
Age: 56
Posts: 2,050
|
Quote:
|
|
03 August 2023, 17:58 | #90 |
The Big White Cat
Join Date: Jan 2005
Location: France
Age: 45
Posts: 829
|
Ok i've used SFS 1.279 that handle max partition size of 128Go ( SFS\00 )
I have partitions of max 50Go, the first one is under 2Go I access at all partitions in WinuAE when i mount my SD card with uaehf.device I will test with other file system |
07 December 2023, 00:14 | #91 |
The Big White Cat
Join Date: Jan 2005
Location: France
Age: 45
Posts: 829
|
Don, your scsi.device handle 1TB drive nicely ;-)
I've used a 1TB SATA drive with a SATA to IDE converter and, yes LBA48 is working great ! I've created partitions beyond 128GB and read from them successfully. On my last post, i was using a SD to IDE adapter but those doesn't seems to like LBA48 I've been able to use a SD Card of 128GB with SD to IDE, it's the maximum capacity usable with this adapter. 1TB in my SX-1 to store videos is really cool! Thanks again for the 46.0 version, it's really a must have ! |
07 December 2023, 22:48 | #92 | |
Registered User
Join Date: Jan 2008
Location: Warsaw/Poland
Age: 56
Posts: 2,050
|
Quote:
|
|
05 January 2024, 01:48 | #93 |
Engineer
Join Date: Oct 2018
Location: Shadow realm
Posts: 167
|
Topic name mentions "open source" but this is not cleanly written from scratch or under an Open Source license, but rather, using old proprietary AmigaOS code as a base?
If so, perhaps "open source" should be removed from the thread name. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Open-source dos.library | Don_Adan | Coders. System | 273 | 02 September 2020 00:42 |
Open source CLI commands | Mrs Beanbag | Coders. System | 13 | 10 December 2016 09:50 |
Open-source graphics library | Don_Adan | Coders. System | 32 | 15 January 2013 22:15 |
NewsRog goes Open Source | Paul | News | 0 | 04 December 2004 16:37 |
BlitzBasic - Is now open source | Djay | Amiga scene | 2 | 08 February 2003 01:09 |
|
|