08 August 2018, 23:22 | #81 | |
Registered User
Join Date: Dec 2013
Location: Lake Havasu City, AZ
Posts: 741
|
Quote:
The problem still remains for me with the v2.10 GOLD core. I can simply just flash back to v2.9 and FUSION works perfectly. Flashing again back to v2.10 and it doesn't. I went back as far as the Silver releases and all of those work as well. Something must have changed with v2.10. My Amiga is crashed so bad when the Mac OS starts up that I have to physically power off the Amiga with the power switch and let it sit for 5 or more seconds before I can turn it back on. CTRL-Amiga-Amiga has no affect. I can certainly take a video of this happening, but that is not going to help resolve anything. |
|
09 August 2018, 12:13 | #82 |
Registered User
Join Date: Feb 2016
Location: NJ USA
Posts: 45
|
All cores run my copy of Fusion and newer test cores and fine on all my gear and the rest of the testers AFAIK. I don't think video is required as this has been sorted.
|
09 August 2018, 12:18 | #83 |
Banned
Join Date: Nov 2007
Location: Trondheim, Norway
Posts: 1,893
|
Silly question - why not use the serial port for debugging?
|
09 August 2018, 13:33 | #84 |
Registered User
Join Date: Aug 2016
Location: Germany
Posts: 122
|
|
09 August 2018, 16:06 | #85 |
Registered User
Join Date: Feb 2016
Location: NJ USA
Posts: 45
|
I guess as its a Kipper card and not a Majsta card that could be part of it? My outfit consists of Kipper Vampires and brand new Majsta cards and V4... I say wait for Gold 2.11 core. I will continue to use Fusion as I have all my original stuff. Jim any hopes of ever supporting os 9 68k with fusion? Also with PPC emulation now on UAE with Intel CPU's will Fusion PPC ever be made available?
Have you a time frame for the new Fusion release? As there is a fairly decent installed Vampire user base a new version would be appreciated. I would even like to see how it does on my PC and bounce back and forth between UAE and Vampire. thanks! |
09 August 2018, 16:30 | #86 |
AmigaDev.com
Join Date: Mar 2016
Location: Stockholm, Sweden
Age: 35
Posts: 625
|
|
09 August 2018, 17:20 | #87 |
Banned
Join Date: Nov 2007
Location: Trondheim, Norway
Posts: 1,893
|
I have one "kipper card" v600v2 and one "majsta card" v500v2, cannot say I have noticed much difference with them, except that the "majsta card" really needs the cap fix, it keeps blinking black on the HDMI output if I set it to use same resolution as the "kipper card".
|
09 August 2018, 18:24 | #88 |
Registered User
Join Date: Feb 2016
Location: NJ USA
Posts: 45
|
|
09 August 2018, 22:34 | #89 |
Registered User
Join Date: Dec 2013
Location: Lake Havasu City, AZ
Posts: 741
|
I have two Kipper cards, both x12 capable and have never had an issue. I would imagine that the flash ROM -->FPGA is checksum'd some how so it shouldn't be a flash ROM issue.
I am not sure what to think. All I know is that I can run FUSION with v2.9, flash it to v2.10 (wait 1 minute after power off to make sure memory is cleared) and the Mac physically crashes the Amiga. Were any changes made to the MMU registers, FPU registers, CCR, memory usage, etc? Maybe the Mac thinks that MMU is available or something? This is not a FUSION problem, it's a MacOS problem because it happens with any version of FUSION, and Shapeshifter does the same thing as well. I can't really debug through the serial port. I might be able to debug through Winkbug though. That is a developer tool that I did use back in the day. It was made by Jeff from the Puzzle Factory (from "Resource" fame). It plugs into the parallel port. It's a box that looks like a printer switcher, but with a 20x2 LCD screen where you can display messages using the winkbug.library. It came in handy when originally developing EMPLANT's Mac emulation. Yes, OS8.1 was the last 68K version released. I sold the rights to FUSION-PPC, so I can't release that. Last edited by JimDrew; 09 August 2018 at 22:40. |
09 August 2018, 23:21 | #90 |
Registered User
Join Date: May 2014
Location: inside the emulator
Posts: 377
|
|
09 August 2018, 23:56 | #91 |
AmigaDev.com
Join Date: Mar 2016
Location: Stockholm, Sweden
Age: 35
Posts: 625
|
All kipper cards had a power issue where the FPGA wouldn't get enough power during heavy loads. Addition of capacitors is needed at two points to make the card stable. Most people experience this beyond 2.7 and forward. Maybe 2.10 x12 was a breaking point for your "black" cards.
|
10 August 2018, 00:18 | #92 |
Registered User
Join Date: Feb 2016
Location: NJ USA
Posts: 45
|
If you are using a black card its not gonna work reliably without the cap mod especially with newer cores. I had two black Kipper black cards and had to recap them to run newer X11 or better cores with stability. I tried to resist recapping but when I was testing cores it was really hit and miss. After that really rock solid. HD video out is stable.
|
10 August 2018, 01:19 | #93 | |
Registered User
Join Date: Dec 2013
Location: Lake Havasu City, AZ
Posts: 741
|
Quote:
My boards are green, but I did add caps long ago. |
|
10 August 2018, 01:24 | #94 |
Registered User
Join Date: Dec 2013
Location: Lake Havasu City, AZ
Posts: 741
|
If an HDMI connector fits and it outputs a video and/or audio data stream, then it's HDMI. That is the gist of what the HDMI group has for one of its many patents. Even things like a simple DVI to HDMI cable requires licensing the patent. The Display Port patent is also now actively being enforced. |
10 August 2018, 02:55 | #95 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,973
|
Quote:
I think they'll be alright. |
|
10 August 2018, 06:32 | #96 |
Registered User
Join Date: Dec 2013
Location: Lake Havasu City, AZ
Posts: 741
|
Perhaps, but they were happy to threaten me with legal action had I been manufacturing or even distributing the product. All it takes to make everything legal is licensing the HDMI technology, which is pretty cheap really.
|
10 August 2018, 08:03 | #97 |
Registered User
Join Date: Jun 2015
Location: Germany
Posts: 1,926
|
US patents cannot be enforced in Europe. Please start your own thread about this topic. The fact remains that several people have shown MacOS 8.1 running on a Vampire with Gold 2.10. Your "bug report" is not reproducible.
|
10 August 2018, 11:15 | #98 |
Banana
Join Date: Jul 2016
Location: Darmstadt
Posts: 1,217
|
I had a look at the HDMI licencing thing; it's the end product which needs a licence, so the FPGAarcade thing would require one too, whether the components used were already licensed or not. People in glass houses...
Anyway, I'm pretty sure that patents can't be applied to cleanroom reimplementations which are interface compatible but otherwise independently developed. On JimDrew's problems; are you using the same version of FUSION which everyone else is, or an updated version you're testing? |
10 August 2018, 12:40 | #99 | |||
Registered User
Join Date: May 2014
Location: inside the emulator
Posts: 377
|
Quote:
As for Displayport: bogus. Quote:
Quote:
Last edited by Megol; 10 August 2018 at 12:47. |
|||
10 August 2018, 13:42 | #100 | ||
Registered User
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 6,381
|
Quote:
Quote:
|
||
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vampire Gold Core v2.9 released | Sinphaltimus | News | 39 | 11 June 2018 11:03 |
GOLD core released for Vampire 600 V2 | guibrush | News | 23 | 16 September 2016 04:34 |
SILVER9 core released for Vampire 600 V2 | TuKo | News | 1 | 04 August 2016 13:13 |
SILVER8 core released for Vampire 600 V2 | TuKo | News | 3 | 02 August 2016 04:13 |
SILVER3 core released for Vampire 600 V2 | TuKo | News | 4 | 03 April 2016 14:01 |
|
|