16 January 2023, 19:46 | #81 |
Registered User
Join Date: Sep 2019
Location: Corfu / Greece
Posts: 410
|
I grabbed the smb2-handler from the link on the first page and put it in L: . Then filesysbox.library in libs. Made the DosDriver you see attached. When I double click it, I assume it mounts the share since I get no error but no icon appears in workbench. If I double click it again then it says that it is already mounted. I opened dopus and right click in S I can see Samba3 as a volume but when I click it it says "No disk present in device SAMBA3". What am I doing wrong?
Last edited by npagonis73; 17 January 2023 at 11:40. |
16 January 2023, 20:16 | #82 |
Paranoid Amigoid
Join Date: Mar 2008
Location: Athens/Greece
Age: 45
Posts: 1,978
|
First... the DOSDRIVER icon needs to have as a Default Tool C:Mount
Second, to be able to see an icon on Workbench you need a Disk.info inside the Shared folder. I don't see anything wrong with your share. Have you tried putting the IP of the NAS instead the hostname (in case something's wrong with DNS on the Amiga side)? My declaration of Startup command is: Startup = "smb://usernameassword@my_pc_ip/shared Volume=mfilosPC" |
16 January 2023, 20:29 | #83 |
old chunk of coal
Join Date: Nov 2011
Location: Hungary
Posts: 1,300
|
You don't need disk.info on your share, I certainly don't have it and the volume shows up just fine with the default floppy icon. If I had to take a shot in the dark then the host name he used can't be resolved on the amiga side. Pinging it should verify this.
|
16 January 2023, 20:35 | #84 | |
Registered User
Join Date: Sep 2019
Location: Corfu / Greece
Posts: 410
|
Quote:
I do have those things you mentioned in your reply. Before today I used smbmounter to mount my shares just fine. Will try ip address instead of hostname to see. |
|
16 January 2023, 20:42 | #85 |
Paranoid Amigoid
Join Date: Mar 2008
Location: Athens/Greece
Age: 45
Posts: 1,978
|
|
16 January 2023, 20:47 | #86 |
Registered User
Join Date: Sep 2019
Location: Corfu / Greece
Posts: 410
|
Update
Using my IP address instead of hostname (as MFilos suggested) worked and mounted the share. Tried to copy a file in Ram but speed is extremely slow. A lot slower than the previous smbfs1 and smbmounter. So slow that is almost unusable. Last edited by npagonis73; 17 January 2023 at 07:05. |
16 January 2023, 21:14 | #87 | |
Paranoid Amigoid
Join Date: Mar 2008
Location: Athens/Greece
Age: 45
Posts: 1,978
|
Quote:
In my Vampire Standalone I get a SpeedTest of 1.84Mbps on Write and 2.90Mbps on Read which is rather nice for my standards. |
|
17 January 2023, 06:34 | #88 |
old chunk of coal
Join Date: Nov 2011
Location: Hungary
Posts: 1,300
|
Big update, charset conversion is here! The handler remains the same, you only need to update filesysbox.library to 54.2. I replaced the Aminet link in the first post. It'll try to auto detect your character set based on your Country or Language setting, but you can always override this with the CHARSET envvar. As a last resort it'll fall back to Latin-1 which should work as a safe default.
|
17 January 2023, 08:21 | #89 |
Thalion Webshrine
Join Date: Jan 2004
Location: Oxford
Posts: 14,463
|
Out of curiosity how does smb2fs handle filenames which are legal in AmigaDOS like "Amber_*" but illegal on the destination filesystem like FAT16/NTFS?
I apologize if this is obvious. Last edited by alexh; 17 January 2023 at 17:58. |
17 January 2023, 09:56 | #90 |
Registered User
Join Date: Oct 2018
Location: France
Posts: 14
|
Is there a way to "wrap" the password inside an "crypted" way ?
|
17 January 2023, 09:59 | #91 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,911
|
|
17 January 2023, 11:45 | #92 |
Registered User
Join Date: Sep 2019
Location: Corfu / Greece
Posts: 410
|
Any idea why the transfer speeds from my server are so extremely slow? Almost unsuable!! I also have the smbfs installed and use this with smbmounter and the speeds there are perfect. Any solution to this? My system is an Amiga 1200 with V1200 running 3.2.1 and using a pcmcia network card getting more than 5mb/sec in amispeedtest and when transfer from my NAS I get around 3mb/sec.
|
17 January 2023, 17:20 | #93 | |||
old chunk of coal
Join Date: Nov 2011
Location: Hungary
Posts: 1,300
|
Quote:
Quote:
https://codebeautify.org/ntlm-hash-generator https://www.browserling.com/tools/ntlm-hash Then specify the password in this format, where HASH is the output you've got from those websites: PASSWORD=ntlm:HASH Quote:
Last edited by BSzili; 17 January 2023 at 17:35. |
|||
17 January 2023, 17:43 | #94 |
Registered User
Join Date: Oct 2018
Location: France
Posts: 14
|
[QUOTE=BSzili;1590152]This is a good question, I'll try to see what happens.
You can use NTLM hashes instead of the actual passwords, these websites can calculate the hash for you: https://codebeautify.org/ntlm-hash-generator https://www.browserling.com/tools/ntlm-hash Then specify the password in this format, where HASH is the output you've got from those websites: PASSWORD=ntlm:HASH Thank you ! |
17 January 2023, 18:28 | #95 |
old chunk of coal
Join Date: Nov 2011
Location: Hungary
Posts: 1,300
|
I just tried this, and the copy operation will simply fail. It's probably best to archive files with such names, you can specify the SMB2 share as the destination.
|
17 January 2023, 22:29 | #96 | |
Registered User
Join Date: Dec 2021
Location: Odense S, Denmark
Posts: 4
|
Quote:
|
|
17 January 2023, 22:43 | #97 |
old chunk of coal
Join Date: Nov 2011
Location: Hungary
Posts: 1,300
|
The startup line. For examples on additional arguments, see the readme of the GitHub page:
https://github.com/salass00/smb2fs |
18 January 2023, 08:37 | #98 |
old chunk of coal
Join Date: Nov 2011
Location: Hungary
Posts: 1,300
|
Just a bit of a heads up, NTLM hash passwords are currently broken due to an endianness issue in the parsing function. I've already sent a fix upstream, I'll let you know when the new handler is available.
|
18 January 2023, 17:04 | #99 |
Registered User
Join Date: Dec 2008
Location: Atlanta, GA USA
Posts: 35
|
I'm having issues getting this working on newly installed systems. It works fine on a couple of my older installs that I've upgraded over time, but on a brand new install where it's nothing but 3.2.1 and Roadshow (with appropriate network drivers) I can't get it working.
I'm wondering if it's possible there's some dependency I'm missing with the brand new installs? |
18 January 2023, 17:48 | #100 |
old chunk of coal
Join Date: Nov 2011
Location: Hungary
Posts: 1,300
|
Probably not, the only dependency is filesysbox.library. Everything else is optional or in the ROM since 3.0.
Speaking of dependencies, the handler's port is now merged into the official repo. There are new versions for both the handler and the library, NTLM hash passwords should now work among other things. I updated the links in the first post accordingly. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Using PotGo on Mouse Port (Port 0)? | Daedalus | Coders. System | 14 | 02 March 2016 20:44 |
Help please - Making Frankenstein os3.0 with os3.5/9 bits | Abdabs | support.Other | 3 | 27 February 2015 21:51 |
Serial port, parallel port, and pipe device mount errors | Samurai_Crow | support.FS-UAE | 4 | 13 March 2014 00:04 |
ECS. Make OS3.1 look like OS3.9 without loosing speed. | lukassid | support.Apps | 21 | 19 February 2013 00:13 |
Sending debug output to the serial port OS3.x | NovaCoder | Coders. C/C++ | 0 | 18 February 2013 06:56 |
|
|