BlueSCSI V2 - Page 3

Nobby_UK · 13 February 2024, 16:41

Anyway here are the drive images in HDTools.

nogginthenog · 14 February 2024, 10:19

How does the contents of your SD card look?
Post your bluescsi.ini also. There is an option to use the entire SD card as a single drive I thik (check the wiki).

Nobby_UK · 15 February 2024, 03:28

The log tells you I have no .ini file

One card just contains the Hard File(s) and/or CD Image.

Another (bigger) card, is set to have the 1 Gig image running
and has Gotek stuff on it + a film.

nogginthenog · 15 February 2024, 19:08

Quote:

I can only see one drive/image on mine.

You need to move HD20-512.hdf to the root of the drive.

Nobby_UK · 15 February 2024, 19:57

Quote:

Originally Posted by nogginthenog

You need to move HD20-512.hdf to the root of the drive.

Duh

It was there, but would not work.

"gvpscsi.device: unit 000 (or 001)
Unexpected Status $4E/$20"

nogginthenog · 18 February 2024, 15:51

Quote:

Originally Posted by Nobby_UK

"gvpscsi.device: unit 000 (or 001)
Unexpected Status $4E/$20"

This was posted to the bluescsi discord server yesterday:

Quote:

RobSmithDev — Yesterday at 14:28
Hey everyone, I know you guys are mainly MAC guys, but got a weird one for you.
I have BlueScsiV2 (latest firmware) running on a GVP-HC2000-8 SCSI card. Works perfectly.
If I swap the BlueSCSI with another one I have then weirdness happens (this other one is working fine in an amiga A590 drive):
The only difference is this other one has the Wifi version of the Pico!
With that one installed, I get an error gvpscsi.device unit 001 Unexected Status $4E/$20 and then it cant find the hard disk.
Now I thought to myself, I'll enable debug, to see what I can find out.
With Debug enabled, it boots perfectly.... every time.....
Any thoughts? its very weird.

Quote:

jokker — Yesterday at 14:30
If you don't mind could you try EnableSCSI2=0 in your bluescsi.ini file for the failing device?

Quote:

RobSmithDev — Yesterday at 14:48
...trying that now
Yes that seemed to work
thanks

Nobby_UK · 24 February 2024, 18:55

[SCSI]
System="Generic"
EnableSCSI2=0 ; Off
PrefetchBytes=0
[SCSI0]
Vendor=Blue
Product=Bluedrive
Version=1.0
SectorsPerTrack=32
HeadsPerCylinder=1

Works, but takes an Age to Boot
Like a Physical Drive doing a Verification

13 February 2024, 16:41	#41
Nobby_UK Registered User Join Date: Jul 2013 Location: Liverpool Posts: 2,600	Anyway here are the drive images in HDTools. Attached Thumbnails

15 February 2024, 03:28	#43
Nobby_UK Registered User Join Date: Jul 2013 Location: Liverpool Posts: 2,600	The log tells you I have no .ini file One card just contains the Hard File(s) and/or CD Image. Another (bigger) card, is set to have the 1 Gig image running and has Gotek stuff on it + a film. Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BlueSCSI to SD	nogginthenog	support.Hardware	13	18 December 2021 11:28

14 February 2024, 10:19	#42
nogginthenog Amigan Join Date: Feb 2012 Location: London Posts: 1,316	How does the contents of your SD card look? Post your bluescsi.ini also. There is an option to use the entire SD card as a single drive I thik (check the wiki).

24 February 2024, 18:55	#47
Nobby_UK Registered User Join Date: Jul 2013 Location: Liverpool Posts: 2,600	[SCSI] System="Generic" EnableSCSI2=0 ; Off PrefetchBytes=0 [SCSI0] Vendor=Blue Product=Bluedrive Version=1.0 SectorsPerTrack=32 HeadsPerCylinder=1 Works, but takes an Age to Boot Like a Physical Drive doing a Verification

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)