What Amigas R U running? - Page 3

Amiga1992 · 02 August 2002, 03:27

Heh, true

Magix · 02 August 2002, 12:17

Quote:

Originally posted by Mick_AKA

I diddnt think you could run os 3.9 with the 3.0 rom?!!

http://www.aminet.org/~aminet/util/boot/BlizKick.lha

jrom · 02 August 2002, 12:57

<offtopic>Is there some SoftKicker that works without a Blizzard Card? I've seen SKick but that only works for plain vanilla amiga's and i have a 68030 with MMU so i guess i need some softkicker with mmu service? (btw i've also tried CpuControl 1.06 without success)</offtopic>

RetroMan · 02 August 2002, 14:02

SKick works fine with a 030/MMU/FPU Card

LUKas007 · 02 August 2002, 14:51

Yes, Skick 3.44 requires that you have at least 68020 and ks2.04 ... anything better should be fine...

Amiga1992 · 02 August 2002, 16:55

Ermm.. I think I use skick on my A600 without problems...

jrom · 02 August 2002, 23:55

Ow... i read in the docs that for MMU cpu's you needed a softkicker that supported mmu's or sth so i haven't tried it... i will give it a try tomorrow then...

LUKas007 · 04 August 2002, 12:35

Quote:

Originally posted by Akira
Ermm.. I think I use skick on my A600 without problems...

Sorry I was wrong... only some softkicked kickstart revisions need 68020... Skick's requirements are ks2.04 and 1MB RAM...

LUKas007 · 04 August 2002, 12:38

Quote:

Originally posted by jrom
Ow... i read in the docs that for MMU cpu's you needed a softkicker that supported mmu's or sth so i haven't tried it... i will give it a try tomorrow then...

Khmm, a CPU with MMU can run any softkicker: requiring a MMU and those that don't require MMU...

Amiga1992 · 04 August 2002, 15:33

Quote:

Originally posted by LUKas007
Sorry I was wrong... only some softkicked kickstart revisions need 68020... Skick's requirements are ks2.04 and 1MB RAM...

Of course, an A1200 KS3.0 wont work on an A600

You just need to pick teh right images.,...

10 August 2002, 10:34

ok back to the subject...

1- a4000 '040 @25mhz 2+16 meg ram 3.2g hd, 24*cd rom, 1901 monitor (not very pretty case), runs well,

1- a1200, gvp '030 @ 50 mhz, 8 meg fast, 250 meg 2.5" hd, 1084s squirrel scsi 4* ext cd rom (immaculate), owned since new in 93

1- cd32 console and joypad

2- ext 501 floppy drives

1- gvp dss+ for sound capture

1- 12? rombus vidi capture card

oko ok , the a1200 and cd32 r boxed up for now

15 August 2002, 22:02

A1200 - standard 60020, 8Mb fast, CDx8 IDE, HDD 170Mb IDE connected to PC by COM using AExplorer

A500 - standard 60000, 1Mb

Antiriad · 15 August 2002, 22:29

Of the two Amigas I have out:

A1200 (Desktop)
OS3.9
2MB CHIP RAM
92MB FAST RAM
Blizzard 68060 CPU
SCSI-IV KIT
SCSI CD-ROM
Amitek Sony External Floppy Drive
6GB Hard Drive
External Scandoubler/Flickerfixer
21" Inch SVGA Monitor
(my PC uses the 17"!!! I got my priorities right!)

A500 (Desktop- what else? Although a towered 500 would be cool)
OS2.0
512k CHIP RAM
2.0MB FAST RAM
A5000 68020 CPU
A570 CD ROM DRIVE
Cumana External Floppy Drive
Supra RAM 500RX
512k Extension
Commodore 14" 1084ST Monitor
GVP A500+ HD Impact Series II 20MB External SCSI Hard Drive with 4MB FAST RAM (Sadly has to swap with the A570 mind)

Oscar Castillo · 20 August 2002, 04:25

Right now I have 5 Amigas

A4000 (Video Toaster 4000 model)
040-25
3.1 ROMs
OS 3.9
14Mb Fast RAM
2Mb Chip
525MB HD
floppy
52X CDROM
Buddha IDE Controller
Catweasel floppy controller
Xsurf Ethernet Card
Toaster 4000

A4000 (standard)
040-25
3.0 ROMs
OS 3.0
16MB Fast
2MB Chip
500MB HD with plenty of errors. ( no time to replace)
Dataflyer Plus SCSI
Toshiba SCSI CDROM
Picasso II

A1200
020/881
8MB Fast
2MB Chip
84MB HD

A1200
020
DKB 1202 (possibly dead)
2MB Chip
80MB HD

And a rather beat up A500 with no expansion, just the 512K chip
It does work though.

And amazingly I haven't had the time to use any of them. Most of the time is taken up with my Mac and OS X programming.

AMIGAZ · 30 October 2004, 15:00

A500+ 2mb chip with GVP A530 40mhz, 8mb fast ram, 3.1 rom, 120mb SCSI HDD, OS3.1

A600 2mb chip with MTEC 630 42mhz, 8mb fast ram, 3.1 rom, 1.2 gig Toshiba HDD, OS3.9

A1200D 2mb chip with Blizzard 1260 50mhz, 32mb fast ram, 3.1 rom, 2.1 gig Seagate HDD, OS3.9

A3000 2mb chip with stock 030 25mhz CPU, 4mb fast ram, 3.1 rom, CV3D gfx card, Seagate 4.3gig SCSI HDD, OS3.1

RetroMan · 30 October 2004, 22:03

Hmmm, guess it´s time for a little update here

Main Amiga :

A1200 Tower (Infinitiv I)
Kick 3.1
Blizzard PPC 210Mhz. / 040
BVision
128MB Ram
20 GB IDE HD
FastATA Controller
Subway USB
8x CD Burner (Philips)
NEC DVD
Black PC Keyboard
Topolino

The "rest"

- A1200/060/75Mhz./32MB Ram/IDEFix Express/6GB HD

- A2000/Blizzard 2060/50Mhz./128MB Ram/12GB SCSI HD/4x SCSI CD Burner/Spectrum 28/24/386er Bridgeboard/ISA Networking Card

- A4000D/040/25Mhz./16MB Ram/Domino/A2065/Vlab

- A2000/A2630/AT-2008 IDE/2GB HD

- A3000D/030/25Mhz.

- A500+/2MB Chip/8MB Fast/Alfa Power HD 560MB/Kick 3.1

- A500

- CDTV

- CD32

- A1000/Kick 1.2/1.3/3.1/512KB Chip/2MB Fast

- A600/2MB Chip

- A600 (in PC Desktop case)/2MB Chip/360MB HD/4x CDRom/A4000 Keyboard

.... and various other A500/A2000/A1200

31 October 2004, 02:24

no.1.> A1200rev1.d/2mbchip/blizard1230-iv/RC030@50mhz(nofpu)8mb 60ns edo/5.1gb ide/3.0roms (have 3.1 roms but cant get them to work

so softkicking 3.1 (legally

) Kingston PC2T (ithink) pcmcia ethernet, squirrel scsi, ibm scsi cdrom, ide-dvd/cdrw (doesnt read dvd's but thats the faulty drive not the software). in big red AT tower case, 200watt at psu, roctec external df1:, cumana external df2: more mods to come.

no.2>A600HD (nohdd) df0:, 1mb. need a 2.5" hdd for this one.
no.3>A600 (no drives - fitting a 3.5" ide 1.2gb in the floppy bay instead, and routing df0: to the external floppy connector.
no.4>A600 (no drives) - plan to turn this into an AmiMPC when funds allow
no.5>A500+ 1MB,DF0:, revision 8a (cracked the FACTORY seals on it this last week

Plan on fitting this into a desktop ATX case and modding it.
no.6>A500, 1MB (expansion slot 512k upgrade.) unable to open it cos i cant find my torx screwdrive, 1.3 roms.

quick question, has anyone ever clocked a blizzard 1230-IV to 66mhz successfully? i was thinking about doing this sometime in the next few weeks, as i used to have a A2000 rev b that had a gvp 030 card in, that i fitted a 25mhz fpu (overclocked to 50mhz with a socket 7 heatsink and fan glued to it). (it was stable, but never used it for prolonged fpu math.....)

MarlboroMan · 31 October 2004, 10:26

Main Amiga: Escom Amiga 1200/Kick 3.1/WB 3.1/Blizzard 1230 IV/16 MB Fast/Internal 2,5" HDD 250 MB External 3,5" HDD with 1,3 GB/PCMCIA CD-Rom/M1438s Monitor

Oldskool Amiga: A500/Kick 1.3 with 512k Fast expansion/original 1011 C= external Diskdrive/1084s Monitor

Spare parts Amiga: Bad looking C= Amiga 1200 with a cheap 030 expansion, 4MB Fast soldered. Internal diskdrive changed to an old A500 diskdrive, but now you couldnt close the case anymore

Parsec · 31 October 2004, 13:34

A1200 (still in desktop case

)

Blizzard IV '030-50
32 Mb RAM
6 GB IBM hard drive (do I win a prize?

)
20" TV

31 October 2004, 13:43

I'll let you know later after ive tried my 20gb maxtor and os3.5 and the ibm 64mb edo ram i have ;-) you do win on screensize though ;-)

15 August 2002, 22:29	#53
Antiriad The Sacred Armour Of Join Date: Aug 2002 Location: Sussex, UK Age: 45 Posts: 1,141	Of the two Amigas I have out: A1200 (Desktop) OS3.9 2MB CHIP RAM 92MB FAST RAM Blizzard 68060 CPU SCSI-IV KIT SCSI CD-ROM Amitek Sony External Floppy Drive 6GB Hard Drive External Scandoubler/Flickerfixer 21" Inch SVGA Monitor (my PC uses the 17"!!! I got my priorities right!) A500 (Desktop- what else? Although a towered 500 would be cool) OS2.0 512k CHIP RAM 2.0MB FAST RAM A5000 68020 CPU A570 CD ROM DRIVE Cumana External Floppy Drive Supra RAM 500RX 512k Extension Commodore 14" 1084ST Monitor GVP A500+ HD Impact Series II 20MB External SCSI Hard Drive with 4MB FAST RAM (Sadly has to swap with the A570 mind) Last edited by Antiriad; 17 August 2002 at 21:54.

20 August 2002, 04:25	#54
Oscar Castillo Junior Member Join Date: Nov 2001 Location: New Jersey, USA Posts: 291	Right now I have 5 Amigas A4000 (Video Toaster 4000 model) 040-25 3.1 ROMs OS 3.9 14Mb Fast RAM 2Mb Chip 525MB HD floppy 52X CDROM Buddha IDE Controller Catweasel floppy controller Xsurf Ethernet Card Toaster 4000 A4000 (standard) 040-25 3.0 ROMs OS 3.0 16MB Fast 2MB Chip 500MB HD with plenty of errors. ( no time to replace) Dataflyer Plus SCSI Toshiba SCSI CDROM Picasso II A1200 020/881 8MB Fast 2MB Chip 84MB HD A1200 020 DKB 1202 (possibly dead) 2MB Chip 80MB HD And a rather beat up A500 with no expansion, just the 512K chip It does work though. And amazingly I haven't had the time to use any of them. Most of the time is taken up with my Mac and OS X programming. Last edited by Oscar Castillo; 20 August 2002 at 04:49.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What screens do you use for your amigas?	mange_lars	Retrogaming General Discussion	13	29 September 2010 13:54
Any got CU Amigas 1997-98?	tonyyeb	Nostalgia & memories	27	08 August 2008 10:45
periods when you were in to amigas	Gordon	Retrogaming General Discussion	14	26 February 2007 09:34
The New Amigas	Galaxy	Amiga scene	7	09 September 2004 10:43
Second-hand amigas in UK	Noo_Noo	Retrogaming General Discussion	17	03 October 2002 13:31

02 August 2002, 03:27	#41
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,651	Heh, true

02 August 2002, 12:57	#43
jrom Wannabe asm coder ;) Join Date: May 2002 Location: The Netherlands Age: 47 Posts: 459	<offtopic>Is there some SoftKicker that works without a Blizzard Card? I've seen SKick but that only works for plain vanilla amiga's and i have a 68030 with MMU so i guess i need some softkicker with mmu service? (btw i've also tried CpuControl 1.06 without success)</offtopic>

02 August 2002, 14:02	#44
RetroMan Registered User Join Date: Aug 2001 Location: Germany Age: 51 Posts: 3,704	SKick works fine with a 030/MMU/FPU Card

02 August 2002, 14:51	#45
LUKas007 Registered User Join Date: May 2002 Location: England Age: 45 Posts: 159	Yes, Skick 3.44 requires that you have at least 68020 and ks2.04 ... anything better should be fine...

02 August 2002, 16:55	#46
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,651	Ermm.. I think I use skick on my A600 without problems...

02 August 2002, 23:55	#47
jrom Wannabe asm coder ;) Join Date: May 2002 Location: The Netherlands Age: 47 Posts: 459	Ow... i read in the docs that for MMU cpu's you needed a softkicker that supported mmu's or sth so i haven't tried it... i will give it a try tomorrow then...

10 August 2002, 10:34	#51
torr Posts: n/a	ok back to the subject... 1- a4000 '040 @25mhz 2+16 meg ram 3.2g hd, 24cd rom, 1901 monitor (not very pretty case), runs well, 1- a1200, gvp '030 @ 50 mhz, 8 meg fast, 250 meg 2.5" hd, 1084s squirrel scsi 4 ext cd rom (immaculate), owned since new in 93 1- cd32 console and joypad 2- ext 501 floppy drives 1- gvp dss+ for sound capture 1- 12? rombus vidi capture card oko ok , the a1200 and cd32 r boxed up for now

15 August 2002, 22:02	#52
HiFiBeliver Posts: n/a	A1200 - standard 60020, 8Mb fast, CDx8 IDE, HDD 170Mb IDE connected to PC by COM using AExplorer A500 - standard 60000, 1Mb

30 October 2004, 15:00	#55
AMIGAZ Amiga-Mad Join Date: Oct 2004 Location: Sweden Age: 47 Posts: 1,291	A500+ 2mb chip with GVP A530 40mhz, 8mb fast ram, 3.1 rom, 120mb SCSI HDD, OS3.1 A600 2mb chip with MTEC 630 42mhz, 8mb fast ram, 3.1 rom, 1.2 gig Toshiba HDD, OS3.9 A1200D 2mb chip with Blizzard 1260 50mhz, 32mb fast ram, 3.1 rom, 2.1 gig Seagate HDD, OS3.9 A3000 2mb chip with stock 030 25mhz CPU, 4mb fast ram, 3.1 rom, CV3D gfx card, Seagate 4.3gig SCSI HDD, OS3.1

30 October 2004, 22:03	#56
RetroMan Registered User Join Date: Aug 2001 Location: Germany Age: 51 Posts: 3,704	Hmmm, guess it´s time for a little update here Main Amiga : A1200 Tower (Infinitiv I) Kick 3.1 Blizzard PPC 210Mhz. / 040 BVision 128MB Ram 20 GB IDE HD FastATA Controller Subway USB 8x CD Burner (Philips) NEC DVD Black PC Keyboard Topolino The "rest" - A1200/060/75Mhz./32MB Ram/IDEFix Express/6GB HD - A2000/Blizzard 2060/50Mhz./128MB Ram/12GB SCSI HD/4x SCSI CD Burner/Spectrum 28/24/386er Bridgeboard/ISA Networking Card - A4000D/040/25Mhz./16MB Ram/Domino/A2065/Vlab - A2000/A2630/AT-2008 IDE/2GB HD - A3000D/030/25Mhz. - A500+/2MB Chip/8MB Fast/Alfa Power HD 560MB/Kick 3.1 - A500 - CDTV - CD32 - A1000/Kick 1.2/1.3/3.1/512KB Chip/2MB Fast - A600/2MB Chip - A600 (in PC Desktop case)/2MB Chip/360MB HD/4x CDRom/A4000 Keyboard .... and various other A500/A2000/A1200

31 October 2004, 02:24	#57
AwoL Posts: n/a	no.1.> A1200rev1.d/2mbchip/blizard1230-iv/RC030@50mhz(nofpu)8mb 60ns edo/5.1gb ide/3.0roms (have 3.1 roms but cant get them to work so softkicking 3.1 (legally ) Kingston PC2T (ithink) pcmcia ethernet, squirrel scsi, ibm scsi cdrom, ide-dvd/cdrw (doesnt read dvd's but thats the faulty drive not the software). in big red AT tower case, 200watt at psu, roctec external df1:, cumana external df2: more mods to come. no.2>A600HD (nohdd) df0:, 1mb. need a 2.5" hdd for this one. no.3>A600 (no drives - fitting a 3.5" ide 1.2gb in the floppy bay instead, and routing df0: to the external floppy connector. no.4>A600 (no drives) - plan to turn this into an AmiMPC when funds allow no.5>A500+ 1MB,DF0:, revision 8a (cracked the FACTORY seals on it this last week Plan on fitting this into a desktop ATX case and modding it. no.6>A500, 1MB (expansion slot 512k upgrade.) unable to open it cos i cant find my torx screwdrive, 1.3 roms. quick question, has anyone ever clocked a blizzard 1230-IV to 66mhz successfully? i was thinking about doing this sometime in the next few weeks, as i used to have a A2000 rev b that had a gvp 030 card in, that i fitted a 25mhz fpu (overclocked to 50mhz with a socket 7 heatsink and fan glued to it). (it was stable, but never used it for prolonged fpu math.....)

31 October 2004, 10:26	#58
MarlboroMan Space for rent Join Date: Feb 2004 Location: Germany Age: 43 Posts: 102	Main Amiga: Escom Amiga 1200/Kick 3.1/WB 3.1/Blizzard 1230 IV/16 MB Fast/Internal 2,5" HDD 250 MB External 3,5" HDD with 1,3 GB/PCMCIA CD-Rom/M1438s Monitor Oldskool Amiga: A500/Kick 1.3 with 512k Fast expansion/original 1011 C= external Diskdrive/1084s Monitor Spare parts Amiga: Bad looking C= Amiga 1200 with a cheap 030 expansion, 4MB Fast soldered. Internal diskdrive changed to an old A500 diskdrive, but now you couldnt close the case anymore

31 October 2004, 13:34	#59
Parsec Registered User Join Date: Feb 2003 Location: Lancashire Age: 49 Posts: 434	A1200 (still in desktop case ) Blizzard IV '030-50 32 Mb RAM 6 GB IBM hard drive (do I win a prize? ) 20" TV

31 October 2004, 13:43	#60
AwoL Posts: n/a	I'll let you know later after ive tried my 20gb maxtor and os3.5 and the ibm 64mb edo ram i have ;-) you do win on screensize though ;-)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)