x86 Bridgeboard update (PCem core) - Page 21

Zilog · 26 August 2018, 21:57

Quote:

Originally Posted by AMIGASYSTEM

IDE Primary Win95 Play Track CD Audio

Thanks for Test.

AMIGASYSTEM · 27 August 2018, 09:34

For me it remains only the problem "Network Card" that Win95 does not detect, any advice?

Zilog · 27 August 2018, 20:48

Quote:

Originally Posted by AMIGASYSTEM

For me it remains only the problem "Network Card" that Win95 does not detect, any advice?

This is my conf file for work with Lan card.

Prerequisite: https://nmap.org/npcap/dist/npcap-0.99-r7.exe

AMIGASYSTEM · 27 August 2018, 22:43

You can take a screenshot of device management showing the contents of the network card set (as shown above on my screenshot).

AnnaWu · 28 August 2018, 08:58

Quote:

Originally Posted by Zilog

This is my conf file for work with Lan card.

Prerequisite: https://nmap.org/npcap/dist/npcap-0.99-r7.exe

Quote:

Windows XP and earlier are not supported; you can use WinPcap for these versions.

...

AMIGASYSTEM · 28 August 2018, 11:48

Quote:

Originally Posted by Zilog

This is my conf file for work with Lan card.

I tried your config and my network cards were not detected, Win95 can not find a Lan network or a wireless card

Regarding your problem on Audio CDs I must have tested your config I think I have solved it, maybe we feel in Italian for details as you have to make changes to the hardware settings on Win95 and WinUAE

AnnaWu · 28 August 2018, 13:18

Quote:

Originally Posted by AMIGASYSTEM

Matteo you can take a screenshot of device management showing the contents of the network card set (as shown above on my screenshot).

I am not sure this is correct and/or complete.
Try to use the RTL8019 ISA Network adapter on WinUAE
Install the Realtek RTL8019 driver (Windows 95)
Adjust the values IO, IRQ,... (WinUAE or Windows 95)
Example:
If the values (WinUAE) are not correct you get a error message on Windows 95 (third screenshot).

Zilog · 28 August 2018, 13:56

Quote:

Originally Posted by AMIGASYSTEM

.......

In Attach Files the screenshoot.

AMIGASYSTEM · 28 August 2018, 14:14

Quote:

Originally Posted by Zilog

In Attach Files the screenshoot.

You have to make screenshot device management from Win95, that if I remember correctly you should have one "Novell 2000 Adapter"

AMIGASYSTEM · 28 August 2018, 14:19

Quote:

Originally Posted by AnnaWu

I am not sure this is correct and/or complete.
Try to use the RTL8019 ISA Network adapter on WinUAE
Install the Realteak RTL8019 driver (Windows 95)
Adjust the values IO, IRQ,... (WinUAE or Windows 95)
Example:
If the values (WinUAE) are not correct you get a error message on Windows 95 (third screenshot).

Anna you have my same results, user Zilog he told me that he got an automatic recognition of his LAN Network Card (The wireless card is not recognized) named Novell 2000 Adapter, he probably on his PC has a LAN Network Card supported (Realtek)

Toni Wilen · 28 August 2018, 18:17

RTL8019 is NE2000 (Novell) clone. Almost all NE2000 cards are clones, original NE2000 had lots of chips, most clones have single chip.

All of them most likely use exact same physical driver file. Only "friendly name" is different.

Zilog · 28 August 2018, 18:37

[QUOTE=Zilog;1264391]Hi Tony,
i have update:
......
[QUOTE]

Hi Tony,
have resolved my problem.

I have actived "Include Cd and FMV audio" into sound option when the Full Motion Video decoder don't central nothing.

I'am point out this if you want disactived this flah box when FMV are not cheched.

Attach File the image.

I'am sorry, for disorder.
Thanks for you patience.

Zilog · 28 August 2018, 20:45

Quote:

Originally Posted by AMIGASYSTEM

You have to make screenshot device management from Win95, that if I remember correctly you should have one "Novell 2000 Adapter"

Into Attach Files.

Toni Wilen · 28 August 2018, 21:13

Quote:

Originally Posted by Zilog

Hi Tony,
i have update:
......

Quote:

Hi Tony,
have resolved my problem.

I have actived "Include Cd and FMV audio" into sound option when the Full Motion Video decoder don't central nothing.

I'am point out this if you want disactived this flah box when FMV are not cheched.

Attach File the image.

I'am sorry, for disorder.
Thanks for you patience.

I wouldn't call it solved problem. Nothing should cause crashes.

Anyway, I rewrote CD audio handling partially because old one only supported single drive (multiple drives using CD audio would cause problems).

Perhaps it also fixes this problem.

AMIGASYSTEM · 28 August 2018, 22:24

Quote:

I have actived "Include Cd and FMV audio" into sound option when the Full Motion Video decoder don't central nothing.

Yes "Include Cd and FMV audio" it was what caused the Crash. Also there are problems on the Sound Card, where you have to set Sound Blaster 1.0 (you have Sound Blaster 16), even the IRQ setting is wrong you have to set 7. Do this you have to delete the "Sound Blaster 16" from Win95 device management and Do a new hardware search, the Sound Blaster 1.0 will be found automatically without errors from Win95. On the config there are also other anomalies.

Zilog · 28 August 2018, 23:35

Quote:

Originally Posted by Toni Wilen

I wouldn't call it solved problem. Nothing should cause crashes.

Anyway, I rewrote CD audio handling partially because old one only supported single drive (multiple drives using CD audio would cause problems).

Perhaps it also fixes this problem.

Without the "Include Cd and FMV Audio" its ok.

With crash.

Zilog · 28 August 2018, 23:38

Quote:

Originally Posted by AMIGASYSTEM

Yes "Include Cd and FMV audio" it was what caused the Crash. Also there are problems on the Sound Card, where you have to set Sound Blaster 1.0 (you have Sound Blaster 16), even the IRQ setting is wrong you have to set 7. Do this you have to delete the "Sound Blaster 16" from Win95 device management and Do a new hardware search, the Sound Blaster 1.0 will be found automatically without errors from Win95. On the config there are also other anomalies.

Thanks a lot.

AMIGASYSTEM · 29 August 2018, 08:33

@AnnaWu
Does the floppy work on Win95? to me it works well from DOS then when it loads Wi95 the floppy does not work anymore

AnnaWu · 29 August 2018, 08:46

Quote:

Originally Posted by AMIGASYSTEM

@AnnaWu
Does the floppy work on Win95? to me it works well from DOS then when it loads Wi95 the floppy does not work anymore

Hmm, A:\ is not accessible. The device is not ready.
In Save mode it is OK.

superfrog · 29 August 2018, 10:41

Does the BB emulation support the ability to use an Amiga floppy drive as a PC drive via the Flipper utility? I tried to make this work just out of curiosity and I got a Diskette drive 0 seek error on boot and it won't read the floppy that's in DF0: (I have Drive A: set to Shared and Shared Amiga Drive set to DF0: in PCPrefs.

I know it's kind of pointless in emulator environment, as I can more easily attach a dedicated PC floppy drive to the BB. But what if I want to pretend that it's 1991 and it's too expensive to buy a 3.5" PC floppy drive after I already spent all my money on my fancy new 386SX Bridgeboard?

27 August 2018, 09:34	#402
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,262	For me it remains only the problem "Network Card" that Win95 does not detect, any advice? Last edited by AMIGASYSTEM; 29 August 2018 at 00:04.

27 August 2018, 22:43	#404
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,262	You can take a screenshot of device management showing the contents of the network card set (as shown above on my screenshot). Last edited by AMIGASYSTEM; 28 August 2018 at 18:45.

28 August 2018, 18:37	#412
Zilog Registered User Join Date: May 2014 Location: Italy Posts: 419	[QUOTE=Zilog;1264391]Hi Tony, i have update: ...... [QUOTE] Hi Tony, have resolved my problem. I have actived "Include Cd and FMV audio" into sound option when the Full Motion Video decoder don't central nothing. I'am point out this if you want disactived this flah box when FMV are not cheched. Attach File the image. I'am sorry, for disorder. Thanks for you patience. Attached Thumbnails Last edited by Zilog; 28 August 2018 at 20:40.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
x86 Bridgeboard PC Speaker/SoundBlaster support?	superfrog	request.UAE Wishlist	30	09 August 2018 18:16
What is "x86 Bridgeboard VGA", and how does it work?	Narf the Mouse	support.WinUAE	7	22 January 2018 14:17
Indivision ECS core update 1.15	wmaciv	Amiga scene	8	02 May 2017 19:30
Bridgeboard emulation (x86 CPU, for example A2286)	GiuseppeC	support.WinUAE	627	16 November 2016 15:42
Minimig firmware/core update	Spellcoder	News	1	27 April 2008 23:02

28 August 2018, 18:17	#411
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,567	RTL8019 is NE2000 (Novell) clone. Almost all NE2000 cards are clones, original NE2000 had lots of chips, most clones have single chip. All of them most likely use exact same physical driver file. Only "friendly name" is different.

29 August 2018, 08:33	#418
AMIGASYSTEM Registered User Join Date: Aug 2014 Location: Brindisi (Italy) Age: 70 Posts: 8,262	@AnnaWu Does the floppy work on Win95? to me it works well from DOS then when it loads Wi95 the floppy does not work anymore

29 August 2018, 10:41	#420
superfrog Registered User Join Date: Jun 2015 Location: San Francisco, USA Posts: 169	Does the BB emulation support the ability to use an Amiga floppy drive as a PC drive via the Flipper utility? I tried to make this work just out of curiosity and I got a Diskette drive 0 seek error on boot and it won't read the floppy that's in DF0: (I have Drive A: set to Shared and Shared Amiga Drive set to DF0: in PCPrefs. I know it's kind of pointless in emulator environment, as I can more easily attach a dedicated PC floppy drive to the BB. But what if I want to pretend that it's 1991 and it's too expensive to buy a 3.5" PC floppy drive after I already spent all my money on my fancy new 386SX Bridgeboard?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)