2 Probs - Page 2

Dr. Dude · 23 January 2004, 16:45

Wait a sec:eek A update?:eek
Erm, what is the primary file needed? (For AGA)

Bloodwych · 23 January 2004, 18:06

I've provided you with all the necessary info above and a link to another workbench for winuae, AIAB, but our communication seems to be on different levels in this thread.

---------------------------------------
This was it in a nutshell:

You need to have a HDF file containing NOTHING but "system.zip".

Go to the hard drive tab, select this HDF and make sure under device it's listed as being DH0:

Place the ClassicWB_install.adf provided into DF0:, boot and follow the instructions, inserting WB3.0 disk when told to do so.
----------------------------------------

As a final attempt, here is an alternative method I used to help djay:

----------------------------------------
Please follow carefully:

1. Unpack system.zip using Winzip (or any other archive program) into a named PC directory of your choice. Ignore any errors (if any) due to the PC's incompatible file system.

2. Open Winuae and add the PC directory (the one you unpacked system.zip into) under the harddrives tab. Don't have any other harddrives mounted at this stage, including any HDFs. Make sure the directory is labelled DH0: under "device".

4. Run the install disk and follow the instructions. Make sure you insert the Workbench 3.0 disk when asked to do so.

5. Remove the install disk and reset.
-----------------------------------------------

And as a final final attempt, I've re-written some of the instructions recently for the next release. I'll link them, but I'm afraid that's all I can offer.

Dr. Dude · 23 January 2004, 20:03

Quote:

I've provided you with all the necessary info above and a link to another workbench for winuae, AIAB, but our communication seems to on different levels in this thread

Indeed, i got the feeling you think i am a LoonyBin whit Amiga's. :theparano

I know how to handel WinUAE, paths, Geting HD's Good. Build CLI commands. And More. Yust not all.

All i ask is, What is the Start Zip? how is it called on your great site? How do i get lost of all the Dots (Icons).
I can replace them bit by bit, but that will take hours, days.

I had probs whit installing the Zip. Ok maybe the Set of WB 3.0 has errors. i got 2 difrent sets.

In the zips is also a instruction, in here is this

Quote:

This addon pack

What i understand from here is that this is a Addon for a Basic thing you made.

For a better or faster way of communication, you have MSN?
My msn adres is my e-mail adres.
(i have no other Communy things yet, as i am forced to do new install for win xp a wile ago)

Bloodwych · 24 January 2004, 00:44

Quote:

Indeed, i got the feeling you think i am a LoonyBin whit Amiga's.

No, I think you are a LoonyBin "whit" english. Especially reading and following advice.

1) Install system.zip from ClassicWB_ADV_SP_V1.zip FIRST
2) Install copper.zip from Copper_ADV_SP_V1.zip SECOND

Instructions above. If you follow them, the dots will disappear! This is my last post - can't do anymore sorry!

Best of luck!

And look, you have more than ten posts, you made it!

why didn't I answer Peanutuks "meaning of life" question, much easier!

Dr. Dude · 24 January 2004, 22:35

:eek :eek :eek Hey yeah, now running at 15....oh 16 i meen.

I go try it out right now

Marcuz · 25 January 2004, 12:40

... emoticons gorefest...

Dr. Dude · 25 January 2004, 16:46

DAMM DAMM DAMM
I get a freaking error over and over.

Bloodwych · 25 January 2004, 17:01

Ignore the TZ, just means the time zone wasn't saved.

Use FULL format instead of QUICK format. Apparently, you have to FULL format a HDF from a WInUAE workbench in Win XP???

No such problem in Win ME.

Dr. Dude · 25 January 2004, 17:04

I always do a FULL format when using a new HDF.

Bloodwych · 25 January 2004, 17:07

Thought it may have been this problem

Well, I have no idea what you're doing wrong. I've covered everything.

PLEASE SAY YOU'VE TRIED THE OTHER METHOD I'VE OUTLINED:

1. Unpack "System.zip" using Winzip (or any other archive program) into a named PC directory of your choice. Ignore any errors (if any) due to the PC's incompatible file system.

2. Setup WinUAE with a configuration that at least matches the minimum specs outlined in the text file provided.

3. Add the PC directory (the one you unpacked "System.zip" into) under the harddrives tab. Don't have any other harddrives mounted at this stage, including any HDFs.
Make sure the directory is assigned as DH0: under "device".

4. Boot from the install disk/ADF provided and follow the on screen instructions.

I have a feeling you haven't bothered.

teh · 25 January 2004, 18:04

Quote:

Originally posted by Peanutuk
Only the question "What is the meaning of live?" has a larger range of responses.

Be more detailed.

"The meaning of live, the universe and everything is 42"

Dr. Dude · 25 January 2004, 19:16

After reading some forum posts. i have try this

-get Fast MEM (does not work, get the same)
-Do not use a HDF, but a folder whit the name DH0:
Well it unzips. But i get a error.

Bloodwych · 25 January 2004, 19:21

Is your PC stable? Overclocked? Seems strange to stop half way like that. Post your WinUAE configuration.

ALSO HAVE YOU TRIED THE METHOD I'VE OUTLINED IN MY LAST POST - UNZIP SYSTEM.ZIP IN WINDOWS USING SOMETHING LIKE WINZIP!

Dr. Dude · 25 January 2004, 20:01

:eek My pc overclocked? Sheez, that will kill your comp fast.
My system is Stable as a rock

Config is in the link in the PM. (latest version of winuae)

Yeah i have unziped it first in the DH0 pcfolder.

Bloodwych · 25 January 2004, 21:21

Quote:

Yeah i have unziped it first in the DH0 pcfolder.

Have you?

I'm NOT talking about placing system.zip into a PC directory and mounting that as DH0:

I'm talking about unzipping the actual system.zip in windows.

Sigh, anyway.............

Thanks for your config. Hang on LOL!

You said you knew how to use winuae?

That is overkill! How much ram has your PC got? It might be dieing with the settings below!
Refreshing every forth frame? How fast is your PC?
JIT needs a cache or it's useless.
Leave the priority at default values.
Be aware floppy speed at 800% might cause problems.

You need to find out what each winuae setting is for, especially the ram and JIT settings.

Try this: WinUAE config adjusted

Anyone speak dutch?

I'm done.

BippyM · 25 January 2004, 21:24

Ouch!!

32Mb is plenty enuff ram for an Amiga and you have got 299Mb selected for WinUAE!!!

Christ!

Dr. Dude · 25 January 2004, 21:33

Yup, i hold enoug power to run 2 time's WinUAE whit this config

And Then its still taking easy

And YEAH i did use WinRAR. (the best

)

And i get the same crap when using Boodwych config

Bloodwych · 25 January 2004, 21:51

Oh well I'm sorry.

It works fine on my PC and I've tried my best to help you. Perhaps someone else will have the answer.

At least you've managed to get that post count up.

At this rate, you'll overtake me! Especially since you haven't transferred it over to your real Amiga yet!!!!! :eek

You'll just have to try (or stick with if you already use it) Amiga in a Box in WinUAE.

Perhaps you'll have better luck once you manage to get the Classicwb over to your real Amiga.

Dr. Dude · 25 January 2004, 21:57

:disgusted OH come on. You have it! You shut know how it works!
Hmmm, time fore the last option.
Get a HDF for download, ready for use.(thay zip great.)
Or Get a FTP ready.

:theparano I have spent 2 DAMM weeks to get it working!
And if it does, i get thare whit loads and loads of errors, and whit dots as Info's

:theparano Sheez is it so hard to build good stuf these days?

BippyM · 25 January 2004, 22:39

It works for Bloodwych...

It works for me!!!

It will probs work on 90% of other users setups!!

My guess is its either you who doesn't understand properly, or your setup is configured wrong somewhere!!!

25 January 2004, 20:01	#34
Dr. Dude Senior Member Join Date: Jan 2004 Location: On Ami World Posts: 500	:eek My pc overclocked? Sheez, that will kill your comp fast. My system is Stable as a rock Config is in the link in the PM. (latest version of winuae) Yeah i have unziped it first in the DH0 pcfolder. Last edited by Dr. Dude; 25 January 2004 at 20:08.

25 January 2004, 21:33	#37
Dr. Dude Senior Member Join Date: Jan 2004 Location: On Ami World Posts: 500	Yup, i hold enoug power to run 2 time's WinUAE whit this config And Then its still taking easy And YEAH i did use WinRAR. (the best ) And i get the same crap when using Boodwych config Last edited by Dr. Dude; 25 January 2004 at 21:43.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wizkid probs	VermillioN	support.Games	6	12 March 2015 06:45
Probs with IK+	HOL2001	support.WinUAE	13	11 June 2009 13:16
OS 3.5 probs	AliasXZ	support.Apps	12	29 November 2008 22:27
Some probs	Fozzie	support.WinUAE	7	15 June 2004 09:09
WB Launch probs	Iron Butterfly	Coders. General	5	07 November 2002 18:10

23 January 2004, 16:45	#21
Dr. Dude Senior Member Join Date: Jan 2004 Location: On Ami World Posts: 500	Wait a sec:eek A update?:eek Erm, what is the primary file needed? (For AGA)

24 January 2004, 22:35	#25
Dr. Dude Senior Member Join Date: Jan 2004 Location: On Ami World Posts: 500	:eek :eek :eek Hey yeah, now running at 15....oh 16 i meen. I go try it out right now

25 January 2004, 12:40	#26
Marcuz Registered User Join Date: Jun 2002 Location: . Age: 48 Posts: 5,562	... emoticons gorefest...

25 January 2004, 16:46	#27
Dr. Dude Senior Member Join Date: Jan 2004 Location: On Ami World Posts: 500	DAMM DAMM DAMM I get a freaking error over and over.

25 January 2004, 17:01	#28
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	Ignore the TZ, just means the time zone wasn't saved. Use FULL format instead of QUICK format. Apparently, you have to FULL format a HDF from a WInUAE workbench in Win XP??? No such problem in Win ME.

25 January 2004, 17:04	#29
Dr. Dude Senior Member Join Date: Jan 2004 Location: On Ami World Posts: 500	I always do a FULL format when using a new HDF.

25 January 2004, 17:07	#30
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	Thought it may have been this problem Well, I have no idea what you're doing wrong. I've covered everything. PLEASE SAY YOU'VE TRIED THE OTHER METHOD I'VE OUTLINED: 1. Unpack "System.zip" using Winzip (or any other archive program) into a named PC directory of your choice. Ignore any errors (if any) due to the PC's incompatible file system. 2. Setup WinUAE with a configuration that at least matches the minimum specs outlined in the text file provided. 3. Add the PC directory (the one you unpacked "System.zip" into) under the harddrives tab. Don't have any other harddrives mounted at this stage, including any HDFs. Make sure the directory is assigned as DH0: under "device". 4. Boot from the install disk/ADF provided and follow the on screen instructions. I have a feeling you haven't bothered.

25 January 2004, 19:16	#32
Dr. Dude Senior Member Join Date: Jan 2004 Location: On Ami World Posts: 500	After reading some forum posts. i have try this -get Fast MEM (does not work, get the same) -Do not use a HDF, but a folder whit the name DH0: Well it unzips. But i get a error.

25 January 2004, 19:21	#33
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	Is your PC stable? Overclocked? Seems strange to stop half way like that. Post your WinUAE configuration. ALSO HAVE YOU TRIED THE METHOD I'VE OUTLINED IN MY LAST POST - UNZIP SYSTEM.ZIP IN WINDOWS USING SOMETHING LIKE WINZIP!

25 January 2004, 21:24	#36
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	Ouch!! 32Mb is plenty enuff ram for an Amiga and you have got 299Mb selected for WinUAE!!! Christ!

25 January 2004, 21:51	#38
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	Oh well I'm sorry. It works fine on my PC and I've tried my best to help you. Perhaps someone else will have the answer. At least you've managed to get that post count up. At this rate, you'll overtake me! Especially since you haven't transferred it over to your real Amiga yet!!!!! :eek You'll just have to try (or stick with if you already use it) Amiga in a Box in WinUAE. Perhaps you'll have better luck once you manage to get the Classicwb over to your real Amiga.

25 January 2004, 21:57	#39
Dr. Dude Senior Member Join Date: Jan 2004 Location: On Ami World Posts: 500	:disgusted OH come on. You have it! You shut know how it works! Hmmm, time fore the last option. Get a HDF for download, ready for use.(thay zip great.) Or Get a FTP ready. :theparano I have spent 2 DAMM weeks to get it working! And if it does, i get thare whit loads and loads of errors, and whit dots as Info's :theparano Sheez is it so hard to build good stuf these days?

25 January 2004, 22:39	#40
BippyM Global Moderator Join Date: Nov 2001 Location: Derby, UK Age: 48 Posts: 9,355	It works for Bloodwych... It works for me!!! It will probs work on 90% of other users setups!! My guess is its either you who doesn't understand properly, or your setup is configured wrong somewhere!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)