![]() |
![]() |
#21 | |
Registered User
Join Date: Nov 2018
Location: Belfast
Posts: 1,554
|
Quote:
Ah well trashed it now! So I did what you said and got the following. Then I went into startup and commented out the line at the top that is trying to make RAM drive T: Now I can't get past the Emu68 Pistorm screen ![]() ![]() So desperately tried to get back to the piStorms startup-sequence and thus far I have been able. Thought I was being clever and put the sd card into my pc to see if I could get access may be through winuae to the dh0 partitions and edit the startup-sequence but I don't seem to be able to do that either. |
|
![]() |
![]() |
#22 | |
PSPUAE DEV
|
I should have added to boot with no startup-sequence through early startup menu.
You proberly got that error, due to it had already tried running startup-sequence and already created dirs. As for stuck on pistorm screen, what do you mean, as you will always get pistorm screen until workbench loads. 23pin RGB is important one to worry about, whats it show on screen? Quote:
|
|
![]() |
![]() |
#23 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,047
|
But this should work. Right-click WinUAE and select "Run as Administrator". Then go to the "CD & Hard Drives" tab and click on "Add Hard Drive". Select the SD card. It should be listed with (RDB) in the column where it says [OS] or [NO MEDIA] for other drives.
|
![]() |
![]() |
#24 | |
PSPUAE DEV
|
Quote:
If its PiStorm SD it lists it a bit different in WinUAE. It shows whole SD, then the seperate RDB partitions. So have to make sure you select right one, as First will be Emu68 FAT32 Boot Partition. |
|
![]() |
![]() |
#25 | ||
Registered User
Join Date: Nov 2018
Location: Belfast
Posts: 1,554
|
Quote:
Anyways I managed to rectify this see below. I'll try your instructions again. Quote:
I basically loaded to the screen I was getting at the very start of this post. From here managed to ed startup-sequence and comment back in the line I had taken out regarding Ram: T etc This allowed Caffeine to work again as normal. Additionally, before I fixed this issue I managed to boot into the CF card from early startup. I probably have been very stupid here and should have noticed I could select which DH0: i was wanting to boot from. Which leads me to believe you were all right and it's obviously some clash of names. Not that I didn't believe you ![]() Am I able to rename partitions without wiping everything out? |
||
![]() |
![]() |
#26 |
Registered User
Join Date: Nov 2018
Location: Belfast
Posts: 1,554
|
renamed CF drive DH0: to DH0_0 but did no good. Also tried DH00: but still couldn't boot into both.
|
![]() |
![]() |
#27 | |
Registered User
Join Date: Nov 2018
Location: Belfast
Posts: 1,554
|
Quote:
Ok so bootED with no startup-sequence then typed: SET ECHO ON then typed: EXECUTE S:STARTUP-SEQUENCE this listed through what looks like the startup sequence and at the very bottoms it give the "Assign Failed returncode20" message. Not able to scroll up to check anything above. Worth Pointing out this time after booting with no startup-sequence I am brought to the RGB output. |
|
![]() |
![]() |
#28 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,047
|
You can press any key to stop scrolling and delete the key to continue.
Anyway you should see what the Assign command looks like immediately above the return code 20 message. Just type it in again exactly as it is printed (without >nil: of course), this should recreate the actual error. |
![]() |
![]() |
#29 | |
PSPUAE DEV
|
Quote:
Why? it does not matter if its using Assigns like SYS: (or what its dos name is, i.e. Caffiene OS) etc etc. You could name it DH0_B0B, still would'nt make a difference. Only Adding A to DH0 (ADH0) would make a difference, as then it would be top of boot list. Its easier to do it the correct way and alter the boot priority on HDToolBox. Anyway, best to do as thomas asked. Please reframe from altering things, as you could make situation worse. |
|
![]() |
![]() |
#30 |
Registered User
Join Date: Nov 2018
Location: Belfast
Posts: 1,554
|
Ok here's a video of me following the instructions.
[ Show youtube player ] The very last lines above the return code 20 message mentions the devloper Assign. So I added this in to which ever did not have the Developer directory which was in DH1 of the CF card. So what happened after this is I would boot into caffeine and nothing on the RGB. However now in Caffeine I would see the drives of the CF card and the workbench screen was missing all the usual stuff from the Caffeine install. All drives where present though from what I could see. But this wasn't what I was expecting so I have removed the developer directory again from DH1 of my CF card. Givin DH1 a different name also had a similar thing happen only this time all drives would be present from both OS, the workbench would load and look like it normally would on the Caffeine SD card as well. Still nothing on the RGB output though. Appreciate the help and patience guy's. I think I'm being incredibly stupid here though and both cannot be running at same time and I just dreamt I could. |
![]() |
![]() |
#31 | |
PSPUAE DEV
|
Does DH1
![]() One thing I did notice, is your caffeine os being distributed with latest P96? As Native is only really usuable with latest P96. Quote:
|
|
![]() |
![]() |
#32 | |
Registered User
Join Date: Nov 2018
Location: Belfast
Posts: 1,554
|
Quote:
![]() |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
PiStorm32-Lite CM4, Expansion Breakout & 64Gb SD Card Bundle | RetroPassionUK | MarketPlace | 6 | 07 January 2024 18:37 |
PiStorm32-Lite problems | tech3475 | support.Hardware | 52 | 23 October 2023 17:49 |
FS: A1200 PiStorm32 Lite with RPi 3A+ and 64GB SD card | StevenJGore | MarketPlace | 0 | 20 October 2023 23:21 |
PiStorm32-Lite CM4, Expansion Breakout & 32Gb SD Card Bundle | RetroPassionUK | MarketPlace | 25 | 09 October 2023 23:58 |
Pistorm32 Lite - Cheap (EU) | alexh | MarketPlace | 1 | 20 April 2023 11:23 |
|
|