29 July 2019, 00:24 | #21 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,875
|
In The Zone I've put a simple WinUae HDF of ShapeShifter including PrepareEmul A1200 in the Startup-Sequence.
maybe someone else could just confirm cough...DamienD that it's just stuck on yellow screen. |
29 July 2019, 11:15 | #22 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,595
|
Some patch code runs after reset but it seems to jump at incorrect ROM address which causes the crash (yellow screen) or HALT3 (rom code does relative jump to nowhere because base address register is zero).
I have no idea what goes wrong. |
29 July 2019, 11:20 | #23 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,875
|
It works on my A1200 - it must of worked at some point with WinUae.
|
29 July 2019, 20:12 | #24 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,595
|
I have been analyzing prepareemul and conclusion is: it is broken hack. Better use something else.
If A1200 option is set, it only works if system is chip ram only, or has non-autoconfig fast ram ("slow" ram, $08000000 accelerator board ram). If A1200 option is not set, it probably only works if system is chip ram only or has autoconfig fast ram (no slow ram allowed!).. |
29 July 2019, 20:22 | #25 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,875
|
For this project it's probably better to just skip prepareemul anyway and just use the MMU alternative.
lots of people have had problems with prepareemul but it's been around a long time and works on real Amiga, I used Amiga 1200, 32mb fast and it worked PrepareEmul A1200. but it's not really worth bothering with but thanks for looking. |
29 July 2019, 21:23 | #26 |
Amigan
Join Date: Feb 2012
Location: London
Posts: 1,321
|
If you have a MMU look into using the MMU graphics driver for ShapeShifter.
On my A4000 (060 so YMMV) 256 colour modes were very usable (faster than AmigaOS) as it only updates screen areas that have changed. |
29 July 2019, 21:31 | #27 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,875
|
Just tried old WinUae 0.9.92 and PrepareEmul A1200 works/CPU=68020/Adjust between CPU and chipset.
Do you use PreapreEmu or MuMove4K? |
29 July 2019, 21:54 | #28 |
Registered User
Join Date: Aug 2004
Location:
Posts: 3,351
|
Is there any difference in how/if PrepareEmul works on a real A1200 with 3.0 vs 3.1 Kickstart ROM?
|
29 July 2019, 22:01 | #29 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,595
|
|
29 July 2019, 22:13 | #30 | |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,875
|
@mark_k ill try it.
Quote:
edit:I did change cpu to 68020/Adjust between CPU and chipset. Last edited by Retro1234; 29 July 2019 at 22:23. |
|
30 July 2019, 08:31 | #31 |
Registered User
Join Date: Jul 2017
Location: Budapest
Posts: 355
|
quoting from here http://eab.abime.net/showthread.php?t=79142:
"also cosmo's exec.library has build-in prepareemul form shapeshifter and from fusion" Maybe this could replace MuMove4k/PrepareEmul? I found cosmo's version of exec.library here http://eab.abime.net/showthread.php?p=781775#post781775, but I don't know how to use it. (put LoadModule line before SetPatch?) |
30 July 2019, 11:50 | #32 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,595
|
Quote:
If execbase is located in autoconfig ram: coldcapture (very early reset proof routine) becomes "almost warmcapture" and executes too late for prepareemul. Autoconfig boards are supposed to disappear at reset but most likely some real A1200 boards ignore part of autoconfig because they can assume they are the only board in the system which can explain why prepareemul sometimes work. |
|
30 July 2019, 16:24 | #33 | ||
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,875
|
Quote:
Quote:
C:MuMove4k PrepareEmul A1200 C:MuFastZero On Last edited by Retro1234; 30 July 2019 at 16:30. |
||
30 July 2019, 16:34 | #34 |
Registered User
Join Date: Jul 2017
Location: Budapest
Posts: 355
|
No, nothing works on the real CD32.
I tried PrepareEmul (the command), MuMove4k with prepareemul option, MuMove4k with prepareemul + A1200 options. Also tried MuMove4k with prepareemul + A1200 + NOREBOOT, that boots into WB but it doesn't work (Shapeshifter says run PrepareEmul). Also tried C:MuFastZero On, makes no difference. That's why I turned to cosmo's exec.library, but I don't know how to enable it. |
30 July 2019, 16:40 | #35 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,875
|
Maybe http://aminet.net/package/util/boot/LoadModule
Loadmodule exec.library I am interested in this but unfortunately I don't have a CD32 or TF330 but I would think someone else has tried to get it working on a TF330, maybe have to ask within those circles, sorry |
30 July 2019, 16:49 | #36 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,595
|
Could you attach your real CD32 WB disk tools/showconfig output?
|
30 July 2019, 18:53 | #37 | |
Registered User
Join Date: Jul 2017
Location: Budapest
Posts: 355
|
Quote:
https://drive.google.com/open?id=10i...t3u5JVoasaNh7g |
|
30 July 2019, 19:33 | #38 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,595
|
Thanks, it has Z3 autoconfig Fast RAM, if it works like autoconfig RAM (=disappears completely when reset, reappers when expansion.library initializes it), PrepareEmul will crash.
|
30 July 2019, 19:48 | #39 |
Phone Homer
Join Date: Jun 2006
Location: 5150
Posts: 5,875
|
If I want to test alternatives like MuMove4k what should I do to setup WinUae to be as close as possible to wairnair's setup?
|
30 July 2019, 20:24 | #40 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,595
|
Quote:
- CPU 68030, MMU emulation enabled. - Disable cycle-exact and more compatible. Data cache emulation can be also off (keeps emulation faster, there should not be any compatibility differences in this situation) - Add Z3 Fast RAM, mapping should not be "UAE". Check that Hardware information panel shows start address 40000000. - Have RDB HDF and mount it using IDE emulation. (Probably not needed but UAE HDF might use less memory than Amiga-side IDE driver which can make a difference) |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Civilization II for mac / shapeshifter | trixster | support.Games | 80 | 01 April 2021 11:08 |
Looking for Mac HDF files (with games) for ShapeShifter. | mingle | Retrogaming General Discussion | 28 | 09 October 2018 12:49 |
CPU idle setting and Shapeshifter/Mac emulation | mark_k | support.WinUAE | 5 | 06 October 2017 19:04 |
Warcraft 2 Tides of Darkness Mac Shapeshifter | tormentor22 | support.Games | 5 | 25 June 2017 14:25 |
Mac os 7.5.3 on shapeshifter | _ThEcRoW | support.Apps | 23 | 09 March 2006 12:37 |
|
|