![]() |
![]() |
#21 |
Retro Freak
Join Date: Nov 2001
Location: Slovenia
Age: 51
Posts: 1,708
|
Tried the last official versions (before your new fixes) of both JSW2 and Manic Miner and both games run at normal speed. The only faster thing is the Credits/Intro screen of Manic Miner (with small Miner Willy on the bottom) - that is running faster than normal. Actual games are both perfect speed on plain old A1200 with 2Mb chip and nothing else.
|
![]() |
![]() |
#22 |
Amigaholic
Join Date: Dec 2009
Location: UK
Posts: 4,759
|
Does the Manic Miner installer actually access the Disk or is that down to faster CPU configs like A1200 stopping the installer reading the disk?
|
![]() |
![]() |
#23 |
Amigaholic
Join Date: Dec 2009
Location: UK
Posts: 4,759
|
Just tried the updated JSW2 installer from The Zone with the official JSW2 IPF #1115 and while it installs and runs under my WinUAE A1200 config, it sticks on 'The saga continues...' text? No key presses or joystick Fire gets past this text, pressing F1 also does nothing but F10 will quit back to Workbench!
Also tried NoMMU, NoAutoVec, NoCache and NoVBRMove without success! Last edited by BarryB; 28 May 2024 at 18:20. |
![]() |
![]() |
#24 |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
It's waiting for a button press there. It uses WHDLoad's Delay() function so it should continute after 5s even if you don't press anything.
|
![]() |
![]() |
#25 | |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
Quote:
It does read files from the hard disk during play, but if you have PRELOAD set then WHDLoad will provide them from a RAM cache instead which will be pretty much instant-load. |
|
![]() |
![]() |
#26 | |
Amigaholic
Join Date: Dec 2009
Location: UK
Posts: 4,759
|
Quote:
When I tried the Manic Miner Installer it never asked for the floppy disk and completed the install and created an icon that ran the game without installing it from the floppy disk! The GUI file was renamed to 'Manic Miner' and that is the file which runs! Also, when the installer finishes it says 'Jet Set Willy II can be found in your <folder> drawer or partition'. |
|
![]() |
![]() |
#27 |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
The speed issues I'm seeing seem to be only on FSUAE, so that's a false alarm there. On a real A500/030 and on WinUAE the game runs fine.
|
![]() |
![]() |
#28 | ||
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
Quote:
![]() Quote:
|
||
![]() |
![]() |
#29 |
PascalDe73
Join Date: Apr 2019
Location: Charleroi Belgium
Age: 51
Posts: 246
|
Hi,
I tested Your Slave B4 on my A500 ACA500Plus 68000 @7Mhz and @ 28 Mhz. In the game the speed and the sound are FULL OK @7 & @28 MHZ In comparison, I tested the IPF File converted in HFEv3 in my Gotek Drive with A500 Menu KS 1.3 512+512 @7 & @28 too ... the speed is the same as WHDLoad installation. The Timer count correctly about speed and the Cosmonaut run at the same speed. In the WHDLoad install on the menu is a little slower in terms of movement On my A1200 GVP A1230 Turbo+II 68030 @ 40 MHZ in WHDLoad all seems to be OK (about menu and in the game too). Best Regards, Pascal |
![]() |
![]() |
#30 |
PascalDe73
Join Date: Apr 2019
Location: Charleroi Belgium
Age: 51
Posts: 246
|
Hi Again,
A full new installation was made From Your B5 version On my both A500 & A1200 all seems to be OK On my A500 the speed in the menu is now better and correct. On my A1200 itt correct too. Best Regards, Pascal |
![]() |
![]() |
#31 |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
heh you're fast
![]() New JSW2 B5 in the Zone. I removed all the "wait fix" patches I'd put in to make it behave on my FSUAE. Seems fine on WinUAE and A500/030-50. |
![]() |
![]() |
#32 | |
PascalDe73
Join Date: Apr 2019
Location: Charleroi Belgium
Age: 51
Posts: 246
|
Quote:
All my install are made under WINUAE 5 ... after a Quick test under WinUAE I always transfert the installation on a CF card to test on my real A500 & A1200. I would like to take this opportunity to thank Youfor integrating my icon into your installation.About The icons it now easy to create a GlowIcon, I Use : https://www.stef.be/dpaint/ and You only need to reduce the piture size and to limit the colors to 256 colors Best regards, Pascal |
|
![]() |
![]() |
#33 |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
I'm on macOS, so I have to run an emulator (vmware) to run the emulator (WinUAE) so normally I just use the emulator (FSUAE)
![]() |
![]() |
![]() |
#34 |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
Manic Miner v2.00 B1 in the Zone.
|
![]() |
![]() |
#35 |
Amigaholic
Join Date: Dec 2009
Location: UK
Posts: 4,759
|
Still not working in WinUAE, gets to the menu now but starting Jet Set Willy II just shows a black screen and can't select the Mani Miner Demo? Tried under a WB3.0 WinUAE and the game threw up a recovervable alert then loaded the game but same issue, black screen when starting the game?
|
![]() |
![]() |
#36 |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
It works fine on WinUAE 5.2.0 A1200/030 and real A500/030 here. The select screen skipping the middle option (it isn't, it's just stepping over it really fast!) is what happens in my FSUAE FWIW. It might be something in your WinUAE version or setup but I couldn't guess what.
|
![]() |
![]() |
#37 | |
Amigaholic
Join Date: Dec 2009
Location: UK
Posts: 4,759
|
Quote:
What ROM are you using as mine is 3.1 in my A1200 config! |
|
![]() |
![]() |
#38 |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
|
![]() |
![]() |
#39 |
PascalDe73
Join Date: Apr 2019
Location: Charleroi Belgium
Age: 51
Posts: 246
|
@girv
Hi, Sorry to report that but I think BarryB has right, For Manic Miner about the install all seems to works correctly till the end But when I click on the Icon to start the game, after WHDLoad Slave Option Screen, I obtain a Black Screen too You can See Down in the border of the screen in the right HALT3 near POWER. Nothing happen after that and I need to Quit WINUAE WINUAE 5.3 64 Bits OS3.5 @68030 I add my WINUAE config I will add in the zone the Result of Your Beta Installation From SPS IPF File Best regards, Pascal Last edited by PascalDe73; 19 July 2024 at 02:18. |
![]() |
![]() |
#40 |
Mostly Harmless
Join Date: Aug 2004
Location: Northern Ireland
Posts: 1,159
|
24-bit addressing is a bit strange for an 030, and I also have MMU enabled. Maybe try NOCACHE? Without MMU I'm not sure what WHDLoad does with chipram.
It does work on my A500/030 ![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Jet Set Willy II whdload | _ThEcRoW | support.Games | 5 | 29 May 2024 15:26 |
16-Bit: Manic Miner, Chuckie Egg, Jet Set Willy II, what were they thinking? | ZEUSDAZ | Retrogaming General Discussion | 21 | 04 July 2022 15:51 |
jet set willy 3 adf? | butfluffy | request.Old Rare Games | 25 | 06 March 2016 12:33 |
Another Jet Set Willy game | Hungry Horace | Retrogaming General Discussion | 16 | 01 September 2015 13:33 |
top hat willy(jet set willy) | thinlega | request.Old Rare Games | 5 | 06 February 2003 23:23 |
|
|