Stop Interlace in AGA mode - Page 2

TCD · 17 August 2008, 19:27

Quote:

Originally Posted by andy_blah

It is installed from floppies (without WHDLoad, the WHDLoad does not have an AGA installer unfortunately), I don`t know what version and the location the floppies are tho...

I don`t quite understand what you mean about "later in the game".

Sorry for making myself not clearer. I meant that it only happens after some time you play the game. I tried it myself and 'Lacer' doesn't change anything.

Tried several settings, but like Toni said there are still artifacts when you move the mouse.

@davideo
Nope

davideo · 17 August 2008, 19:30

@TCD

Oh well - I wasn't sure if it would help or not. Seemed worthwhile trying.

I've just loaded it through ClassicWB_FULL. The version I tried is Hires or Lores. I wonder if it's Hires flicker rather than AGA Interlace?

Dave G

TCD · 17 August 2008, 19:43

Quote:

Originally Posted by davideo

I've just loaded it through ClassicWB_FULL. The version I tried is Hires or Lores. I wonder if it's Hires flicker rather than AGA Interlace?

I would also say that it's a HiRes issue. I just tested it with the 'Full ECS' chipset and it's the same. But interlace is used for HiRes as far as I know and has nothing to do with AGA. A-Train is ECS only even in HiRes.

andy_blah · 17 August 2008, 19:45

I did not find any tool under that name seemingly, do I have to install Picasso96 and the other arsenal for that?

And there is no solution for this game?

Darn those americans with their interlace...

davideo · 17 August 2008, 19:49

@andy

Perhaps we should start from the beginning and ask some basic questions

What system are you trying to run it on? What version of Workbench have you got? Which version of ATrain in particular are you trying to run?

O.T. Bollox I just lost out on a 2028 SCSI card

Dave G

TCD · 17 August 2008, 19:49

Quote:

Originally Posted by andy_blah

I did not find any tool under that name seemingly, do I have to install Picasso96 and the other arsenal for that?

Even if it doesn't help here, you find it in the Tools drawer of your Workbench 3.1 install.

andy_blah · 17 August 2008, 20:01

Quote:

Originally Posted by davideo

What system are you trying to run it on? What version of Workbench have you got? Which version of ATrain in particular are you trying to run?

It`s the Workbench 3.1 with nothing else installed than WHDLoad, on an A1200. The version is the one that`s installed from the original floppies (without WHDLoad, as the WHDLoad installer for this game does not install the HiRes version of the game)

I might be nosy about this one, but:

Quote:

Originally Posted by davideo

O.T. Bollox I just lost out on a 2028 SCSI card

What happened?

Quote:

Originally Posted by TheCyberDruid

Even if it doesn't help here, you find it in the Tools drawer of your Workbench 3.1 install.

I`ve told you ...

TCD · 17 August 2008, 20:04

That's strange. It's on the Extras disk. Maybe your installation is not complete?

davideo · 17 August 2008, 20:07

Quote:

Originally Posted by andy_blah

I might be nosy about this one, but:

What happened?

Got outbidded in last few seconds on Ebay. Nothing new there. Happens a lot.

I'm in the process of trying this on my 4000D. Just copying the floppies over.

Dave G

TCD · 17 August 2008, 20:10

Quote:

Originally Posted by davideo

Got outbidded in last few seconds on Ebay. Nothing new there. Happens a lot.

I'm in the process of trying this on my 4000D. Just copying the floppies over.

Sorry to hear that (eBay)

and good idea (A4000D)

davideo · 17 August 2008, 20:13

@Andy

That screen dump is WinUae!! Isn't it?

Dave G

andy_blah · 17 August 2008, 20:14

Quote:

Originally Posted by davideo

Got outbidded in last few seconds on Ebay. Nothing new there. Happens a lot.

Oh, I thought you had it and it failed. Sorry about your hard luck

Quote:

Originally Posted by davideo

I'm in the process of trying this on my 4000D. Just copying the floppies over.

Thank-you for that and sorry for the trouble. You mean copying as in installing?

Quote:

Originally Posted by TheCyberDruid

That's strange. It's on the Extras disk. Maybe your installation is not complete?

I don`t know, I installed it just as I had done it before, and I knew that before I had troubles with an outdated installer tool after which I couldn`t install WHDLoad, and I have that problem again, mind you

Quote:

Originally Posted by TheCyberDruid

and good idea (A4000D)

Indeed

Quote:

Originally Posted by davideo

That screen dump is WinUae!! Isn't it?

Yes it is

davideo · 17 August 2008, 20:19

@Andy

In that case then - yes install the Picasso stuff. You'll find your display a lot better and it should help with the flicker.

I'll confirm that in a minute - Just installing on my 4000D at the minute.

Dave G

andy_blah · 17 August 2008, 20:27

I was thinking of rather having a pre-installed Workbench. Do you have good thoughts about this one?

TCD · 17 August 2008, 20:35

AmigaInABox is not the best out there. Sadly ClassicWB is not available atm, so you should try AmigaSys.

andy_blah · 17 August 2008, 20:42

Thank-you for that, I will install it a little bit later as I`m doing some encoding.

DDNI · 17 August 2008, 20:54

Using KG A-Train install, I dont see an option for HiRes or Interlace screens?..... What am I missing?

andy_blah · 17 August 2008, 20:58

If you`re trying to install the game using WHDLoad you will probably won`t get the AGA version installed. Use the original installer from the disks instead.

DDNI · 17 August 2008, 20:59

k ta

TCD · 17 August 2008, 21:01

Quote:

Originally Posted by andy_blah

If you`re trying to install the game using WHDLoad you will probably won`t get the AGA version installed. Use the original installer from the disks instead.

There is no AGA version. It's just an HiRes option

I wonder why the WHDLoad version is LoRes. Maybe there were the same problems as here.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Disable of Scanlines in Interlace mode	Retro-Nerd	request.UAE Wishlist	5	11 December 2012 13:26
indivision aga and ham mode	pbareges	support.Hardware	3	03 February 2009 12:25
AGA mode Impossible Mission 2025	Tim Janssen	support.Games	5	26 January 2009 16:22
What's the best screen mode for an AGA shoot-um-up	NovaCoder	Coders. General	5	09 January 2009 13:19
Details of the AGA double CAS fetch mode?	Leffmann	Coders. General	3	29 July 2008 11:26

17 August 2008, 19:30	#22
davideo Amiga Tomcat Join Date: Sep 2007 Location: Boston Lincs Posts: 1,502	@TCD Oh well - I wasn't sure if it would help or not. Seemed worthwhile trying. I've just loaded it through ClassicWB_FULL. The version I tried is Hires or Lores. I wonder if it's Hires flicker rather than AGA Interlace? Dave G

17 August 2008, 19:45	#24
andy_blah Registered User Join Date: Nov 2006 Location: /dev/null/ Posts: 69	I did not find any tool under that name seemingly, do I have to install Picasso96 and the other arsenal for that? And there is no solution for this game? Darn those americans with their interlace...

17 August 2008, 19:49	#25
davideo Amiga Tomcat Join Date: Sep 2007 Location: Boston Lincs Posts: 1,502	@andy Perhaps we should start from the beginning and ask some basic questions What system are you trying to run it on? What version of Workbench have you got? Which version of ATrain in particular are you trying to run? O.T. Bollox I just lost out on a 2028 SCSI card Dave G

17 August 2008, 20:04	#28
TCD HOL/FTP busy bee Join Date: Sep 2006 Location: Germany Age: 46 Posts: 31,965	That's strange. It's on the Extras disk. Maybe your installation is not complete?

17 August 2008, 20:13	#31
davideo Amiga Tomcat Join Date: Sep 2007 Location: Boston Lincs Posts: 1,502	@Andy That screen dump is WinUae!! Isn't it? Dave G

17 August 2008, 20:19	#33
davideo Amiga Tomcat Join Date: Sep 2007 Location: Boston Lincs Posts: 1,502	@Andy In that case then - yes install the Picasso stuff. You'll find your display a lot better and it should help with the flicker. I'll confirm that in a minute - Just installing on my 4000D at the minute. Dave G

17 August 2008, 20:27	#34
andy_blah Registered User Join Date: Nov 2006 Location: /dev/null/ Posts: 69	I was thinking of rather having a pre-installed Workbench. Do you have good thoughts about this one?

17 August 2008, 20:35	#35
TCD HOL/FTP busy bee Join Date: Sep 2006 Location: Germany Age: 46 Posts: 31,965	AmigaInABox is not the best out there. Sadly ClassicWB is not available atm, so you should try AmigaSys.

17 August 2008, 20:42	#36
andy_blah Registered User Join Date: Nov 2006 Location: /dev/null/ Posts: 69	Thank-you for that, I will install it a little bit later as I`m doing some encoding.

17 August 2008, 20:54	#37
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,433	Using KG A-Train install, I dont see an option for HiRes or Interlace screens?..... What am I missing?

17 August 2008, 20:58	#38
andy_blah Registered User Join Date: Nov 2006 Location: /dev/null/ Posts: 69	If you`re trying to install the game using WHDLoad you will probably won`t get the AGA version installed. Use the original installer from the disks instead.

17 August 2008, 20:59	#39
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,433	k ta

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)