WinUAE QEMU PPC

[FOL]

Originally Posted by Toni Wilen

Switch off JIT first and try again. m68 JIT is useless when emulating OS4.
Also always start with basic setup, when it works, only then add extra hardware, easier to find out what causes the problem.

Problem is probably is caused by address space limits (Mediator uses huge amounts of Z3 space). Swiching off JIT should help a bit.

G-REX is the best option if you want to save Z3 space (It is not autoconfig board and uses normally unused address sapce). Check the read me in OS41FE install CD, you need to add extra parameter to enable OS4 G-REX support.

First thing I did was try JIT, as I heard you mention it before. Still the same. I also tried adding Z3 RAM 128MB as I have heard you mention that also.

I started with basic config and it all works fine until I add RTG card.
i.e. setting Z3III village tronic. When thats added it just crashes.
Not even my old configs work since last beta, hence trying to create a new config.

I will try G-REX, however it even crashed when I had no bridgeboards selected.

[Toni Wilen]

Originally Posted by FOL

First thing I did was try JIT, as I heard you mention it before. Still the same. I also tried adding Z3 RAM 128MB as I have heard you mention that also.

I started with basic config and it all works fine until I add RTG card.
i.e. setting Z3III village tronic. When thats added it just crashes.
Not even my old configs work since last beta, hence trying to create a new config.

I will try G-REX, however it even crashed when I had no bridgeboards selected.

Attach new config and log with minimal possible config that does not work. (no JIT, no Z3 fast, no PCI and so on)

[AMIGASYSTEM]

Originally Posted by FOL

however it even crashed when I had no bridgeboards selected.

Tried to replace "winuae.exe", it had happened to me sometimes, when after the replacement is no longer happening, if you changed some files rom do a rescan ROMs

[FOL]

Originally Posted by AMIGASYSTEM

Tried to replace "winuae.exe", it had happened to me sometimes, when after the replacement is no longer happening, if you changed some files rom do a rescan ROMs

First thing I did after every new beta.

[AMIGASYSTEM]

Originally Posted by FOL

First thing I did after every new beta.

I was referring to the one in use that may have some corruption!

[Toni Wilen]

Also post #279 config does not match log.

[FOL]

Originally Posted by Toni Wilen

Also post #279 config does not match log.

It should. I did them at the same time.
Will do some more later when Im home.

[FOL]

Here are the logs and crash dumps.

EDIT:- Looked at crash dump, says the thread tried writing to an virtual address it doesnt have access for.
Should have pointed out, Im now running windows 10 if it makes a difference.

[Toni Wilen]

Originally Posted by FOL

Here are the logs and crash dumps.

You still have JIT enabled. JIT on = useless dump file.
Attach also your original config file, for some reason automatically added config is not correct (possibly related to some corruption).

[FOL]

Originally Posted by Toni Wilen

You still have JIT enabled. JIT on = useless dump file.
Attach also your original config file, for some reason automatically added config is not correct (possibly related to some corruption).

Hmmm, I turned off JIT and also tried fresh config.
Give me two mins will try again.

EDIT:- Fresh config and definitely JIT disabled (should have been in last one).

[Toni Wilen]

Make also sure you don't use restart option or change any options on the fly when creating logs. Run winuae.exe, load config, tick debug option, start emulation only.

[FOL]

Originally Posted by Toni Wilen

Make also sure you don't use restart option or change any options on the fly when creating logs. Run winuae.exe, load config, tick debug option, start emulation only.

Im am, but I have to force close everytime as I cant click out of the UAE window.

Here's what Im doing. Load WinUAE, then load config, then select winuaelog.txt, then tick full logging and finally start.

[Toni Wilen]

Random attempt: does http://www.winuae.net/files/b/winuae.7z fix the crash? (If it does not, dump attach dump from this version, it is useless too)

[FOL]

Originally Posted by Toni Wilen

Random attempt: does http://www.winuae.net/files/b/winuae.7z fix the crash? (If it does not, dump attach dump from this version, it is useless too)

That solved it, it works like a dream first try now. What was it?

[Toni Wilen]

Originally Posted by FOL

That solved it, it works like a dream first try now. What was it?

New PicassoIV ROM selection in Expansion panel caused some unexpected side-effects..

[FOL]

Originally Posted by Toni Wilen

New PicassoIV ROM selection in Expansion panel caused some unexpected side-effects..

Thanks for fix, . Now I can play around with it.

[B14ck W01f]

Toni, when WinUAE users got AmigaOS 4.1 installed in their PPC config, they hacked into the configuration files themselves so that they could change the PPC model. Do you have any plans at some stage to include 603e or 604 options within the GUI itself?

[Toni Wilen]

GUI space is very limited but if it is added, I'll probably add some other QEMU supported PPC processors types too. (If someone wants to run programs optimized for "real" PPC systems?)

[AMIGASYSTEM]

You can affect the emulation is released the New SDK for AmigaOS 4.1 Final Edition

[ero__]

Will we get any speed like on 3.9 (I mean fast as can windows do)? I'm using e7300 Core2Duo CPU with 4 gb ram on win7. How can I make 4.1 as faster as it?