WinUAE 1.5.0 beta series - Page 14

Marcuz · 10 April 2008, 13:25

Quote:

Originally Posted by Toni Wilen

You do know that OGL/D3D is not working. Read changelogs..
If other filters crash = bug.

sorry i missed the OGL bit, that's why i asked in the first place if there were changes;

about the first part of my post though, the change of resolutions from workbench, have you checked it?

i'm just back at home after a 10 days away i still haven't tryed the new beta

thomas · 13 April 2008, 14:01

Running WinUAE with a HDF attached to "real" controller (e.g. *IDE0*) crashes without dump.

Toni Wilen · 14 April 2008, 15:51

Quote:

Originally Posted by thomas

Running WinUAE with a HDF attached to "real" controller (e.g. *IDE0*) crashes without dump.

Can't duplicate (btw, reports can't get any more minimal..)

thomas · 14 April 2008, 19:32

Quote:

Can't duplicate

I can. Choose A4000 from Quickstart or load an existing config, create a new HDF or use an existing one, enable RDB mode (if not already), attach it to IDE0 (if not already), click on start -> crash.

Same HDF attached to UAE works fine.

Quote:

reports can't get any more minimal

I know, but tell me what I should report. Log file is created but empty. Dump file is nowhere to be found.

I could let it send the problem report to Microsoft if that helps...

Mad-Matt · 14 April 2008, 23:32

I have this seen this issue in latest beta as well (so am using previous version in the mean time). the emu crashes before the log gets started so nothing to post .

using my normal config which uses ide0 with rdb bootable hardfile crash. If i change it to uae then boots fine . This issue is only happening in the latest beta.

Toni Wilen · 20 April 2008, 11:37

http://www.winuae.net/files/b/winuae_1500b13.zip

Beta 13:

- more screen mode switching problems fixed
- automatically select next bigger resolution if fullscreen mode fails to open (for example 50Hz-only modes without 50Hz compatible display)
- added "keep aspect ratio" checkbox to filter panel, syncronizes vertical and horizontal zoom sliders (OGL/D3D are still broken!)
- both vertical and horizontal filter multiplier set to "FS" and aspect ratio checkbox checked -> keep aspect ratio
- midscreen BPLCON4 modifications fixed (broken since 1200b2, stupid bug, wrong register address..) fixes Gloom (and other programs using same copper C2P method) graphics problems
- winuaeenforcer stack debug output fix (BR)
- PCMCIA SRAM emulation eject crash fix
- fullwindow Picasso96 mode is centered again

andreas · 20 April 2008, 12:35

Quote:

Originally Posted by Toni Wilen

- midscreen BPLCON4 modifications fixed (broken since 1200b2, stupid bug, wrong register address..) fixes Gloom (and other programs using same copper C2P method) graphics problems

Hmm. AGA-only feature/issue?

Toni Wilen · 20 April 2008, 12:45

Quote:

Originally Posted by andreas

Hmm. AGA-only feature/issue?

Yes, BPLCON4 is AGA-only register.

spajdr · 20 April 2008, 13:25

Thank you Toni, Gloom looks fine now

Mad-Matt · 20 April 2008, 17:51

Booting from ide0 is still instantly crashing the emu before log is written. Have to set as uae to be able to boot.

Toni Wilen · 20 April 2008, 18:06

Quote:

Originally Posted by Mad-Matt

Booting from ide0 is still instantly crashing the emu before log is written. Have to set as uae to be able to boot.

Didn't do anything with this because I can't duplicate and haven't got enough information to debug it.

thomas · 20 April 2008, 18:55

Quote:

Originally Posted by Toni Wilen

haven't got enough information to debug it.

Finally I got a dump when I changed from SCSI0 (which expectedly did not work with a A4000D ROM) to IDE0 while WinUAE was already running and clicked on Reset. This was on Vista Home Premium 64bit but also happens on XP Home 32bit on all PCs I own and when WinUAE is first started.

20 April 2008, 19:08

Since beta11 or so the mouse pointer is working, but invisible. Did not change any configuration. Whats wrong?

Toni Wilen · 20 April 2008, 19:48

Quote:

Originally Posted by knolle

Since beta11 or so the mouse pointer is working, but invisible. Did not change any configuration. Whats wrong?

winuaelog.txt please

Toni Wilen · 20 April 2008, 20:20

Quote:

Originally Posted by thomas

Finally I got a dump when I changed from SCSI0 (which expectedly did not work with a A4000D ROM) to IDE0 while WinUAE was already running and clicked on Reset. This was on Vista Home Premium 64bit but also happens on XP Home 32bit on all PCs I own and when WinUAE is first started.

Thanks. I forgot to remove some debugging code that crashes if specific paths are not available.

It is time to find my brown paper bag..

20 April 2008, 22:42

Quote:

Originally Posted by Toni Wilen

winuaelog.txt please

"No mouse pointer visible"-File is attached.

Toni Wilen · 21 April 2008, 08:32

Quote:

Originally Posted by knolle

"No mouse pointer visible"-File is attached.

winuaelog.txt, NOT winuaebootlog.txt..

21 April 2008, 09:41

Quote:

Originally Posted by Toni Wilen

winuaelog.txt, NOT winuaebootlog.txt..

sorry,

here comes the right "mousepointer not visible"-log.

Toni Wilen · 21 April 2008, 10:25

Quote:

Originally Posted by knolle

sorry,

here comes the right "mousepointer not visible"-log.

Thanks. Hmm.. This is something that "shouldn't" happen..

Does it work in windowed mode? Does it work if you change color depth setting to 32 in WinUAE GUI display panel? (before starting emulation)

21 April 2008, 11:55

Quote:

Originally Posted by Toni Wilen

Thanks. Hmm.. This is something that "shouldn't" happen..

Does it work in windowed mode? Does it work if you change color depth setting to 32 in WinUAE GUI display panel? (before starting emulation)

Yes, happens in windowed mode and different color depth settings, too.
Beta9 is working fine, problem started with beta10

14 April 2008, 23:32	#265
Mad-Matt Longplayer Join Date: Jan 2005 Location: Lincoln / UK Age: 45 Posts: 1,853	I have this seen this issue in latest beta as well (so am using previous version in the mean time). the emu crashes before the log gets started so nothing to post . using my normal config which uses ide0 with rdb bootable hardfile crash. If i change it to uae then boots fine . This issue is only happening in the latest beta. Last edited by Mad-Matt; 14 April 2008 at 23:37.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WinUAE 2.5.1 beta series	Toni Wilen	support.WinUAE	69	22 December 2012 10:22
WinUAE 2.3.3 beta series	Toni Wilen	support.WinUAE	124	17 September 2011 15:48
WinUAE 2.3.2 beta series	Toni Wilen	support.WinUAE	79	31 May 2011 19:39
WinUAE 2.3.0 beta series (was 2.2.1)	Toni Wilen	support.WinUAE	229	22 September 2010 19:20

13 April 2008, 14:01	#262
thomas Registered User Join Date: Jan 2002 Location: Germany Posts: 7,026	Running WinUAE with a HDF attached to "real" controller (e.g. IDE0) crashes without dump.

20 April 2008, 11:37	#266
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,570	http://www.winuae.net/files/b/winuae_1500b13.zip Beta 13: - more screen mode switching problems fixed - automatically select next bigger resolution if fullscreen mode fails to open (for example 50Hz-only modes without 50Hz compatible display) - added "keep aspect ratio" checkbox to filter panel, syncronizes vertical and horizontal zoom sliders (OGL/D3D are still broken!) - both vertical and horizontal filter multiplier set to "FS" and aspect ratio checkbox checked -> keep aspect ratio - midscreen BPLCON4 modifications fixed (broken since 1200b2, stupid bug, wrong register address..) fixes Gloom (and other programs using same copper C2P method) graphics problems - winuaeenforcer stack debug output fix (BR) - PCMCIA SRAM emulation eject crash fix - fullwindow Picasso96 mode is centered again

20 April 2008, 13:25	#269
spajdr Old fart Join Date: Feb 2003 Location: Ostrava/Czech Republic Age: 46 Posts: 315	Thank you Toni, Gloom looks fine now

20 April 2008, 17:51	#270
Mad-Matt Longplayer Join Date: Jan 2005 Location: Lincoln / UK Age: 45 Posts: 1,853	Booting from ide0 is still instantly crashing the emu before log is written. Have to set as uae to be able to boot.

20 April 2008, 19:08	#273
knolle Posts: n/a	Since beta11 or so the mouse pointer is working, but invisible. Did not change any configuration. Whats wrong?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)