WinUAE 3.4.0 beta series

[Toni Wilen]

Originally Posted by AnnaWu

Thanks for the info, Toni.

The official version of PCem doesn't have any network support.

It does not really matter. Network = ISA card which is nothing more than few simple io ports + interrupt connected to existing NE2000 emulation (Already used as NE2000 PCI, NE2000 PCMCIA and now NE2000 ISA, only difference being IO mapping, also very popular RTL8019 is more or less NE2000 so something like Ariadne II or X-Surf would be easy to emulate too)

There is nothing sensitive or timing critical in network emulation (but sound on the other hand..).

Bridgeboards being old enough fortunately limit the choice of expansion hardware greatly

[AnnaWu]

Limited or not.
I like the x86 bridgeboard emulation.

[AnnaWu]

b6

Toni, please can you explain me why I get a crash if I try to load Cannon Fodder with CD32 FMV + SX32-Pro accelerator support?
No problems with WinUAE 3.3.0 series.

[AnnaWu]

Cannon Fodder with CD32 FMV

Also the intro with the tank is missing.

[AnnaWu]

Originally Posted by AnnaWu

Cannon Fodder with CD32 FMV

Also the intro with the tank is missing.

The problem with the intro is solved.
Instead of :Enabled I choosed the available ROM (CD32 FMV)
The config is not 1:1 applicable.

[mark_k]

A minor GUI issue with the Expansion Board Settings. This happens with the 3.4.0 betas but not 3.3.0.

Any "extra settings" controls for a given expansion remain shown when you change the expansion category. For example:
- Run WinUAE, click Expansions.
- In Expansion Board Settings, select SCSI Controllers then below that A4091 (Commodore). A drop-down box appears below with options Fast Bus, Delayed autoboot etc.
- Change SCSI Controllers to something else, e.g. RTG boards. The A4091 drop-down box remains shown.

[AMIGASYSTEM]

Originally Posted by AMIGASYSTEM

Ciao Toni, sorry again, I would like to report the minor faults of 3.4.0 b5 but also present in previous beta 3.4.0, I do not know if the problems are just my (Win7 32Bit), i hope my English is inclusive.

- If you create a new config from scratch for OS4.1 sound cards FM801/ES1370 also activated with relative check They are no longer present on OS4.1.
The new saved config, when viewed with 3.3.0 shows FM801/ES1370 are disabled

- With 3.4.0 b5 but also in 3.4.0 previous Beta with sound cards FM801/ES1370 on OS4.1 the sound is very distorted, with 3.3.0 (same config same system) the sound feels good.

- With 3.4.0 b5 but also in 3.4.0 previous Beta with with the graphics card UAE Zorro III the opening of the Workbench windows turns out to be slower than Picasso IV (Workbench graphical windows disgusting), with 3.3.0 (same config same system) no problem.

Although I did not have answers, thanks for the fix

- B6 Fixed issue save audio cards on creating new config
- B6 improves sound quality though still not perfect yet on my PC
- B6 improves speed and slowing graphic window opening with UAE Zorro IIII, Picasso IV board is always faster and no graphical slowdown.

[Arnie]

Xebec config now working in B6.
I had to make a new config though as the old one wouldn't work.

Originally Posted by Toni Wilen

Does speed now match 3.3.0?

Well, yes.

[AnnaWu]

b6

I have another problem with CD32 emulation + CD+G (Karaoke) support.
Can not load/play the Music + Graphics
No problems with the WinUAE 3.3.0 series.

[AnnaWu]

WinUAE 3.3.0
Same config (Amiga CD32 Peter Gabriel.uae)

[AnnaWu]

b6

CD32 emulation + VideoCD support
Can not load the CD image and play ...
No problems with the WinUAE 3.3.0 series.

[AnnaWu]

WinUAE 3.3.0
Same config (Amiga CD32 VideoCD + Karaoke.uae)

[Toni Wilen]

CD32 FMV rom load from pre-3.4.0 config fixed, CD32 CD audio first track problem fixed, Expansion GUI not hiding extra options fixed.

[AnnaWu]

Originally Posted by Toni Wilen

CD32 FMV rom load from pre-3.4.0 config fixed, CD32 CD audio first track problem fixed, Expansion GUI not hiding extra options fixed.

Newest winuae.7z

CD32 emulation + CD+G (Karaoke) + VideoCD support is working now, thank you Toni.

Cannon Fodder with CD32 FMV + SX32-Pro accelerator support still produce a crash.

[Toni Wilen]

Originally Posted by AnnaWu

Cannon Fodder with CD32 FMV + SX32-Pro accelerator support still produce a crash.

There is no guarantee if it is correct or not. "Worked previously" means nothing in these kinds of impossible configurations.

[AnnaWu]

Originally Posted by Toni Wilen

There is no guarantee if it is correct or not. "Worked previously" means nothing in these kinds of impossible configurations.

The original CD32 hardware support the SX32-Pro accelerator?

[AnnaWu]

CD32 FMV rom load from pre-3.4.0 config fixed

Thank you

Newest winuae.7z


b6

[Toni Wilen]

Originally Posted by AnnaWu

The original CD32 hardware support the SX32-Pro accelerator?

You said FMV and SX32Pro. How are you going to connect both at the same time?

[AnnaWu]

Originally Posted by Toni Wilen

You said FMV and SX32Pro. How are you going to connect both at the same time?

Understand.
You mean, either FMV or SX32Pro.
Both can not operate simultaneously.