New project - Fúria EC020 - Page 11

Zetr0 · 29 September 2016, 08:55

Quote:

Originally Posted by Boboo_SK

Velmi pěkný opravdu!
Rád bych vidět, že dokončení!

Also I need to introduce you to a friend on here called Speed Geek, a really REALLY nice guy, and incredibly knowledgeable about the 68030 state machine!

I believe he haunts these boards at times, if not you can find him on AmiBay!

Hodně štěstí s tímto projektem a děkuji za Furia020 - budu se dostat jednu z nich před Vánocemi!

jack-3d · 29 September 2016, 11:26

Quote:

Originally Posted by idrougge

So the card can't be switched off then?

There is no option to switch off the card.

Lemaru · 04 October 2016, 21:57

So is there no way to update the firmware on this card ourselves?

Also, when the Furia 030 likely to be released?

jack-3d · 05 October 2016, 12:26

Furia 030 for A600 will unfortunately never be released

Its just fully working prototype. But what Furia author said he might be porting Furia to A500 ;o)

jarp · 06 October 2016, 13:06

Hey, about securing the Furia to the motherboard, what about grounding when using screws? Amiga's HDD cradle sockets are firmly grounded and Furia has screw holes on each corner which are also connected to the ground. Thus there will be no short circuit or anything like that, but if I ground each corner of the Furia can there be weird ground loop problems or something like that?

So when I screw the Furia to the motherboard should I use plastic washers or is grounding every corner desirable? I've seen pictures in the wild doing the both - plastic washers and not. Currently I do not use any washers and found no problems, but surely there's best way to do it.

Ps. Since I got no accessories with my Furia I just ordered 8mm tall M3 plastic washers and 18mm tall M2.2 self tapping screws (had to cut few millimeters off they were too tall otherwise). Worked perfectly and feels VERY secure:

Omolungo · 01 November 2016, 10:07

Quote:

Originally Posted by jack-3d

New firmware test result:

Official release soon. Stay tuned ;o)

Released?

Mick · 16 November 2016, 19:54

Any news on this? is it just an overclock of the CPU?

Will we be able to update it ourselves like Vampire?

30 December 2016, 18:05

furiatune ide on doesn't work for me since is allways off after restart. Im using cloanto rom 3.x and SFS, any help?

idrougge · 31 December 2016, 01:12

Don't you need to run it in the startup-sequence?

jarp · 31 December 2016, 10:23

Quote:

Originally Posted by Jeruro

furiatune ide on doesn't work for me since is allways off after restart. Im using cloanto rom 3.x and SFS, any help?

Put these rows to the top of your startup-sequence:

C:furiatune >RAM:furiatune.log status
search >NIL: RAM:furiatune.log "IDESpeedup is on"
If WARN
C:furiatune >NIL: ide on reboot
EndIf
C:furiatune >NIL: addmem

If you want to use maprom use something like this:

C:furiatune >NIL: ide on maprom Devs:Kickstarts/kick45061.A600 reboot

Not sure though if this helps you, "ide on" SHOULD survive warm boot and you are saying your's do not, but don't know if you meant cold boot instead.

Superman · 31 December 2016, 11:32

I found the IDE speedup made no difference at all on my A600. Activating the shadowrom function did make a big difference however. The drive speed increased from 1.3m/s to 2.4m/s and the drystones in sysinfo increased to 6715 with 7.00 mips.

plasmab · 31 December 2016, 11:44

Lovely project.

Boboo_SK · 31 December 2016, 12:31

IDE speed need Gayle-01 on board the A600 and scsi.device v44.1 or v46.1
when using Gayle-02 must be "ide off" !!!

jarp · 31 December 2016, 20:18

Well that explains why I got huge boost from ide on and Superman did not. My Amiga 300 has Gayle-01...

Superman · 31 December 2016, 20:38

Mine is a rev 1 A300 with Gayle 01 also but I was running the standard WB 3.1 Scsi device. I just replaced it with version 46 and sure enough I have had another increase to 3.2m/s

Thanks for the tip Boboo

Boboo_SK · 31 December 2016, 20:38

IDE speed uses a bug in Gayle-01, drive speed is 3,7MB/s up to 4,3 MB/s (Microdrive HITASHI)

02 January 2017, 03:01

Gayle-01 here but i cant find scsi.device v44.1 or v46.1

jarp · 02 January 2017, 11:44

Quote:

Originally Posted by Jeruro

Gayle-01 here but i cant find scsi.device v44.1 or v46.1

I got good speed boost with 43.35 included in Cloanto's Kickstart 3.x...

02 January 2017, 15:14

Quote:

Originally Posted by jarp

I got good speed boost with 43.35 included in Cloanto's Kickstart 3.x...

My 3.x scsi.device version is 43.46 and didn't work. I found scsi.device 46.0 and i get about 3,2 mb/s now but "ide on" still not working and i can only boot 1/10 times... In WinUAE the 46.0 version works perfectly.

CMTX · 19 July 2017, 13:25

Hello,

I read somewhere that you can use all the memory in furia AND the pcmcia slot at the same time, with some sort of rom patch or similar. Is that true? If I remember right, ACA620 had a similar solution

Thank you!

06 October 2016, 13:06	#205
jarp Registered User Join Date: Apr 2016 Location: Helsinki / Finland Posts: 176	Hey, about securing the Furia to the motherboard, what about grounding when using screws? Amiga's HDD cradle sockets are firmly grounded and Furia has screw holes on each corner which are also connected to the ground. Thus there will be no short circuit or anything like that, but if I ground each corner of the Furia can there be weird ground loop problems or something like that? So when I screw the Furia to the motherboard should I use plastic washers or is grounding every corner desirable? I've seen pictures in the wild doing the both - plastic washers and not. Currently I do not use any washers and found no problems, but surely there's best way to do it. Ps. Since I got no accessories with my Furia I just ordered 8mm tall M3 plastic washers and 18mm tall M2.2 self tapping screws (had to cut few millimeters off they were too tall otherwise). Worked perfectly and feels VERY secure: Attached Thumbnails

31 December 2016, 12:31	#213
Boboo_SK Develop HW Join Date: Jul 2011 Location: Nitra / Slovakia Posts: 101	IDE speed IDE speed need Gayle-01 on board the A600 and scsi.device v44.1 or v46.1 when using Gayle-02 must be "ide off" !!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2x New Low Cost Turbo Card for A600 "Fúria"	venox	Amiga scene	80	14 November 2012 11:38
TotalCalc and EC020 FPU bug?	Leandro Jardim	support.WinUAE	5	25 February 2012 20:25
The ST-01 Project	HideawayStudio	Amiga scene	16	29 July 2008 19:54
Project One	rygar	request.Old Rare Games	2	27 November 2007 01:20

04 October 2016, 21:57	#203
Lemaru Registered User Join Date: Oct 2016 Location: Berks, UK Posts: 271	So is there no way to update the firmware on this card ourselves? Also, when the Furia 030 likely to be released?

05 October 2016, 12:26	#204
jack-3d kLiker Join Date: Mar 2011 Location: Brno / Czech Republic Posts: 371	Furia 030 for A600 will unfortunately never be released Its just fully working prototype. But what Furia author said he might be porting Furia to A500 ;o)

16 November 2016, 19:54	#207
Mick Registered User Join Date: Jan 2004 Location: Yorkshire Posts: 713	Any news on this? is it just an overclock of the CPU? Will we be able to update it ourselves like Vampire?

30 December 2016, 18:05	#208
Jeruro Posts: n/a	furiatune ide on doesn't work for me since is allways off after restart. Im using cloanto rom 3.x and SFS, any help?

31 December 2016, 01:12	#209
idrougge Registered User Join Date: Sep 2007 Location: Stockholm Posts: 4,344	Don't you need to run it in the startup-sequence?

31 December 2016, 11:32	#211
Superman Super Member Join Date: Sep 2014 Location: Wakefield Age: 49 Posts: 1,334	I found the IDE speedup made no difference at all on my A600. Activating the shadowrom function did make a big difference however. The drive speed increased from 1.3m/s to 2.4m/s and the drystones in sysinfo increased to 6715 with 7.00 mips.

31 December 2016, 11:44	#212
plasmab Banned Join Date: Sep 2016 Location: UK Posts: 2,917	Lovely project.

31 December 2016, 20:18	#214
jarp Registered User Join Date: Apr 2016 Location: Helsinki / Finland Posts: 176	Well that explains why I got huge boost from ide on and Superman did not. My Amiga 300 has Gayle-01...

31 December 2016, 20:38	#215
Superman Super Member Join Date: Sep 2014 Location: Wakefield Age: 49 Posts: 1,334	Mine is a rev 1 A300 with Gayle 01 also but I was running the standard WB 3.1 Scsi device. I just replaced it with version 46 and sure enough I have had another increase to 3.2m/s Thanks for the tip Boboo

31 December 2016, 20:38	#216
Boboo_SK Develop HW Join Date: Jul 2011 Location: Nitra / Slovakia Posts: 101	IDE speed uses a bug in Gayle-01, drive speed is 3,7MB/s up to 4,3 MB/s (Microdrive HITASHI)

02 January 2017, 03:01	#217
Jeruro Posts: n/a	Gayle-01 here but i cant find scsi.device v44.1 or v46.1

19 July 2017, 13:25	#220
CMTX Registered User Join Date: Apr 2014 Location: Mallorca es Funki Posts: 44	Hello, I read somewhere that you can use all the memory in furia AND the pcmcia slot at the same time, with some sort of rom patch or similar. Is that true? If I remember right, ACA620 had a similar solution Thank you!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)