21 May 2018, 11:46 | #2041 |
Registered User
Join Date: Jan 2007
Location: near Vienna/Austria
Posts: 390
|
I've tested ScummVM_1.8_WOS_b4 from the zone. Unfortunatly the programm crashes on my Amiga4000 with CyberstormPPC. Any ideas? Many thanks.
Last edited by AMike; 07 October 2020 at 21:10. |
21 May 2018, 11:48 | #2042 |
Registered User
Join Date: Dec 2015
Location: Germany
Posts: 163
|
@nexus
dude, cut the crap. i have invested over 700 Euros for the sonnet g4 including taxes, shipping costs, rework, new ram and further modifications i had to make on my a4000 to make this card work. who the hell do you think you are to judge about my finances? 5V is indeed an issue because the A4000 motherboard wasn’t built for so much drainage that is needed for mediator, voodoo and sonnet. another issue is the cooling which in my case came with a few compromises and btw, it’s my business where and when i offer my stuff for sale and not up to you to decide. got it? just because you (well mostly greblfarkl and hedeon) helped me on the issues i had, that doesn’t mean that YOU have any claim or power on my opinion or decisions. If you are offended by it, so be it. It is a toy for me, a nice gimmick, so is the whole PPC stuff on classic incl. cyberstorm and blizzard cards. indeed the whole amiga hobby is a nice toy. Those cards are just underpowered and yes, even 400MHz (not 450) is too less. I have never said that the work you’ve done is stupid or worthless or anything else disrespecting your efforts. Quite the opposite and i have the greatest respect for that. and if you read all my posts you‘ll see exactly that in between the lines. I can satisfy almost all of my daily demands with my MorphOS PPC system. There is a huge software base and fast enough CPUs for that. On the Sonnet it’s quite different and i came to realize that for my classic demands a PPC is just too much. I‘ll be happy with my MKII, run some Demos, play some WHDLoad games and watch MPG movies on my peggy plus card. you know, there are people on this planet who change their mind from time to time on certain topics. not quite common but it happens. Last edited by Cego; 21 May 2018 at 13:27. |
21 May 2018, 13:10 | #2043 | ||
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,980
|
Quote:
Try increasing stack and launching via CLI. stack 5000000 ScummVM_WOS Quote:
Last edited by grelbfarlk; 21 May 2018 at 13:16. |
||
21 May 2018, 16:16 | #2044 |
Registered User
Join Date: Jan 2007
Location: near Vienna/Austria
Posts: 390
|
|
21 May 2018, 17:58 | #2045 | |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
Quote:
|
|
21 May 2018, 18:22 | #2046 |
Registered User
Join Date: Dec 2015
Location: Germany
Posts: 163
|
i have already been warned about you and your methods in the past. Please don't bother me any further and stop blaming me for derailing the thread, when you're the one who actually started bragging about this in several forums in the first place. Thank you.
btw, Sonnet and Mediator are sold. |
21 May 2018, 18:46 | #2047 | |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
Quote:
elaborate? methods in the past lol guy you are funny i have no past on any forums and you keep saying several forums i like to know these places you keep makin up and im glad its sold maybe someone will appreciate it |
|
21 May 2018, 19:15 | #2048 |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
now what im am curious about is those with 5v mediators that are having stability issues at this moment
i want to make sure that the vrm mod on sonnet isnt producing noise that could cause stability issues just fyi on diy soldering that vrm a cold solder joint could also cause current/voltage issues so if adding that yourself dont be shy with the flux and their should never be a bubble of solder many youtubes vids showing how a joint should look afterwards Last edited by nexus; 21 May 2018 at 19:22. |
21 May 2018, 19:27 | #2049 |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
might just make a test system with these other configs people are using so ill just turn one of my mediators into a 5v then do mods to sonnet see what else maybe going on
it is possible that there are some bad vrm's that could be causing this could be fakes etc etc so if you buy one make sure to try and buy from a reputable retailer newark/mouser/digikey etc Last edited by nexus; 21 May 2018 at 19:46. |
21 May 2018, 19:54 | #2050 |
Registered User
Join Date: Dec 2015
Location: Germany
Posts: 163
|
@nexus
what’s so hard to understand when i say „don’t bother me any further“? I really don’t care about your whining. Live with it. Oh and if you got something to say, take your own advice and stop spamming this thread and write me a PM. Maybe i‘ll response, but only if you behave like a good boy. |
21 May 2018, 20:18 | #2051 | |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
Quote:
think you are just mad/salty you couldnt go ultra instinct lol still need a scouter too see these power levels Last edited by nexus; 21 May 2018 at 20:36. |
|
21 May 2018, 21:04 | #2052 |
Registered User
Join Date: Dec 2015
Location: Germany
Posts: 163
|
uhm, yeah you nailed it...
not. |
21 May 2018, 21:09 | #2053 |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
anyways can everyone here with stability issues state the setup they are using so i can try to recreate myself
sonnet or rapture dont buy this card unless you plan on modding it or the mediator http://www.dyneng.com/pci2pmc.html as it only gives 1.5amps and dont buy any with a bridge chip Last edited by nexus; 21 May 2018 at 21:15. |
21 May 2018, 22:27 | #2054 |
Registered User
Join Date: Sep 2015
Location: London, UK
Posts: 419
|
No, I didn't change the swap jumper - just left it in the default position which is jumper on I think. The system went unstable just with the Toccata in the Zorro slot - random exceptions/lock ups. Weird because I previously had a FastATA in there which must have drawn some current too, but there you are.
|
21 May 2018, 23:02 | #2055 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,980
|
Quote:
That's sort of the behavior I see when SWAP jumper is not correct or when mixing certain kinds of Zorro cards with PCI. You might try changing it and giving it another try-or not if you're tired of playing with it. |
|
21 May 2018, 23:05 | #2056 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,356
|
Wrangler, you've tried the Toccata in the system without the rapture also in there? Did the seller mention any instabilities, or sold as fully working? Want me to give it a try in my A3000?
|
21 May 2018, 23:57 | #2057 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,980
|
|
22 May 2018, 01:45 | #2058 |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
so no one has hardware stability issues anymore i take it? im guessing everyone with a rapture is using a ramix 239/f?
Last edited by nexus; 22 May 2018 at 02:00. |
22 May 2018, 02:05 | #2059 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,356
|
We could do with a list to show what hw people have. It would be interesting to see how many have a rapture set up now.
|
22 May 2018, 02:07 | #2060 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,980
|
|
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WANTED: PCI Sound Card VORTEX2 SuperQuard / SQ2500 or Turtlebeach SantaCruz pci card | keropi | MarketPlace | 12 | 15 March 2017 02:48 |
Wanted:Sonnet Technologies QuadDoubler 50 (Doubler 4000) | kronuz | MarketPlace | 0 | 16 June 2013 00:29 |
eBay : Sonnet Quaddoubler | alexh | MarketPlace | 3 | 07 May 2013 00:50 |
Overlay problem on GeForce 7200 | Leandro Jardim | support.WinUAE | 1 | 10 August 2010 15:50 |
Prometheus PCI & Voodoo 3 PCI GFX Card | Slayer | support.Hardware | 21 | 05 September 2006 10:57 |
|
|