02 October 2016, 23:26 | #181 |
Registered User
Join Date: Mar 2012
Location: Norfolk, UK
Posts: 1,157
|
If memory serves, for the EZMouse I used the middle-mouse button pin in output mode, and multiplexed the extra signals similar to how a Megadrive pad works: with the MMB pin in a low state, the wheel button is mapped to the left button, the fourth button, if present, is mapped to the right button, and wheel events are mapped to the lowest bit of each mouse counter.
|
03 October 2016, 00:36 | #182 |
Registered User
Join Date: Jul 2014
Location: Finland
Posts: 1,186
|
Indeed, i'm pretty sure the Mroocheck and PS2m and derivatives all use the MMB pin for this as well.
|
03 October 2016, 01:19 | #183 |
Registered User
Join Date: Sep 2007
Location: Stockholm
Posts: 4,357
|
|
03 October 2016, 03:26 | #184 |
Registered User
Join Date: Jul 2014
Location: Finland
Posts: 1,186
|
Freewheel has some support to force scrolling on MUI toolbars by IDCMP events (mouse scrolling).
I just tried and here it works. as soon as i run FreeWheel scrolling works in iBrowse. Note that i'm using a USB Mouse over Poseidon + the v50 input.device from Ralph Schmidt. However this should work with any FreeWheel compatible mouse driver (Cocolino/PS2m have them). |
03 October 2016, 08:40 | #185 | |
old bearded fool
Join Date: Jan 2010
Location: Bangkok
Age: 56
Posts: 779
|
Quote:
|
|
03 October 2016, 23:29 | #186 | |
Posts: n/a
|
Quote:
Another problem is, wheel button is already assigned for mode selection and sometimes mouse speed changes when the button is pressed. However, I could not yet understand exactly how this works. Except for that limitation, I really like the little adapter! My old serial mouse was making me crazy |
|
23 October 2016, 13:09 | #187 |
Registered User
Join Date: Nov 2014
Location: Norway
Posts: 388
|
I got SUM Keyboard adapter on my A600 with Vampire, and I love it.
A few programs doesnt seem to like the combination; Hippoplayer Protracker 362 THX I should add that I have disconnected/removed my floppydrive, so the USB cable can fit thru there. Sadly the USB cable is too short to be dragged thru the RF Modulator hole in the case. Anyone had similar issues? I guess I should test if reinstalling the floppydrive will fix this crashing/freezing... |
24 October 2016, 12:11 | #188 |
Registered User
Join Date: Nov 2014
Location: Norway
Posts: 388
|
Reinstalled the Floppydrive, and Hippoplayer stopped crashing/freezing the computer.
Protracker 362 and THX still freeze the computer, altho its not really of any consequence since I dont really use them... |
09 April 2019, 19:11 | #189 |
Missile Command Champion
Join Date: Aug 2005
Location: Germany
Age: 52
Posts: 12,458
|
One for the compatibility list. The Arendo CSL vertical mouse (wireless) works perfectly fine with Rys MK II.
|
17 February 2021, 12:35 | #190 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,408
|
Hi Spidi, I hope you still read this thread and are open for more ys MkII irmware updates. As also can be seen in this thread http://eab.abime.net/showthread.php?t=86497 On my CD32 I'm using a combination of:
Rys MkII with latest firmware 8Bitdo wireless USB adapter: https://www.8bitdo.com/wireless-usb-adapter/ 8Bitdo SF30Pro (not plus) wireless controller and PS4 dual shock controller Both controllers work fine in joystick, pad & CD32 modes. However, the button mapping is totally weird and confusing. Can I still provide you with the info using the tools mentioned earlier in this thread so you can provide an updated firmware? |
17 February 2021, 22:21 | #191 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,408
|
I figured out the mapping and USB info:
Code:
Wireless connector Device Descriptor: bcdUSB: 0x0200 bDeviceClass: 0x00 bDeviceSubClass: 0x00 bDeviceProtocol: 0x00 bMaxPacketSize0: 0x40 (64) idVendor: 0x2DC8 idProduct: 0x3100 bcdDevice: 0x0001 iManufacturer: 0x01 0x0409: "8BitDo Button mapping of wireless 8bitdo SN30 Pro = SF30 Pro (not SF30Pro+) D-pad POV Hat Left analog stick X & Y Axis Left analog stick button (L3) Button 14 Right analog stick Z Axis & Z Rotation Right analog stick button (R3) Button 15 Select Button 11 Start Button 12 Blue X Button 4 Green Y Button 5 Red A Button 1 Yellow B Button 2 Home Button 3 L1 Button 7 L2 Button 9 R1 Button 8 R2 Button 10 Not mapped Button 6, Button 13 Button mapping of wireless PS4 dual shock D-pad POV Hat Left analog stick X & Y Axis Left analog stick button (L3) Button 14 Right analog stick Z Axis & Z Rotation Right analog stick button (R3) Button 15 Share Button 11 Options Button 12 Square Button 4 Triangle Button 5 Cross Button 1 Circle Button 2 Playstation button Button 3 L1 Button 7 L2 Button 9 R1 Button 8 R2 Button 10 Not mapped Button 6, Button 13 Preferred mapping (Rys MkII CD32 emulation mode): I corrected my original info, my thinking was wrong. Of course you can't change the mapping between the wireless controller and the receiver. Only between the receiver and the CD32. D-pad POV Hat --> CD32 D-Pad Left analog stick X & Y Axis --> CD32 D-Pad (Is that possible map this to both D-Pad and left analog stick?) Left analog stick button (L3) Button 14 --> No CD32 mapping Right analog stick Z Axis & Z Rot --> No CD32 mapping Right analog stick button (R3) Button 15 --> No CD32 mapping Select Button 11 --> Together with button 12 operation mode switch Start Button 12 --> Together with button 11 operation mode switch Blue X Button 4 --> CD32 blue button Green Y Button 5 --> CD32 green button Red A Button 1 --> CD32 red button Yellow B Button 2 --> CD32 yellow button Home Button 3 --> No CD32 mapping (If this is mapped in joystick and pad mode, please also replace this with other button) L1 Button 7 --> CD32 L button (<<) L2 Button 9 --> Autofire 2 R1 Button 8 --> CD32 R button (>>) R2 Button 10 --> Autofire 1 Last edited by spudje; 18 February 2021 at 00:03. |
21 February 2021, 19:18 | #192 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,408
|
Unfortunately no response from Spidi yet Still hoping they're still willing to make a new firmware to (better) support this wireless adapter.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga USB Mouse Adapter | Amigan123 | MarketPlace | 41 | 20 September 2022 22:09 |
Dual Amiga joystick USB adapter | sidchip | Retrogaming General Discussion | 0 | 19 January 2014 19:51 |
Amiga Joystick to USB Adapter Cable | amigakit.com | MarketPlace | 21 | 16 July 2011 10:53 |
WTB: Amiga Joystick to USB Adapter | mr.niceguy | MarketPlace | 9 | 20 February 2010 17:16 |
Amiga Joystick > USB adapter. | Smiley | Hardware pics | 10 | 16 September 2009 17:11 |
|
|