![]() |
![]() |
#21 |
Amiga Tomcat
Join Date: Sep 2007
Location: Boston Lincs
Posts: 1,502
|
I've just looked at my personal set of WB3.0 and this is what I've found and where
Code:
Storage3.0:DosDrivers/PC0 Storage3.0:DosDrivers/PC0.info Workbench3.0:Devs/mfm.device Workbench3.0:L/CrossDosFileSystem Code:
PC0 and PC0.info need to be in DEVS:DosDrivers for it to find PC0 at bootup mfm.device needs to be in Devs: CrossDOSFileSystem needs to be in L: ![]() Dave G ![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jun 2008
Location: planet earth
Posts: 1,115
|
|
![]() |
![]() |
#23 |
Registered User
Join Date: Sep 2008
Location: N/A
Posts: 420
|
You nailed it dave.that was the problem.i showed all files on the disks,and the pc0.info,mfm.system were missing on them.so looks like a new set will have to be ordered.wish i could get the files off the zone but thanks to not having a cf or cross dos i wont be able too.However i have "dos2dos" if that's any use.when it asks were the msdos disk will be i put in df0: then nothing happens
![]() Last edited by JACK98; 15 November 2013 at 20:06. |
![]() |
![]() |
#24 |
Amiga Tomcat
Join Date: Sep 2007
Location: Boston Lincs
Posts: 1,502
|
Another way to get stuff onto your harddrive for your Miggy is to stick your HD into a PC and use WinUAE to setup a pretend 1200 using your HD and then copy stuff direct onto it from the PC.
I've done it this way in the past before I got my CF card. Pity you haven't got a CD drive on your 1200 - you could have stuck stuff on there from your PC and then uploaded it onto your 1200. Have you got a serial lead to connect your Miggy and PC together? Best bet would be your CF card option. Have you asked on Amibay if anybody has got a known working one going cheap? Just throwing ideas around ![]() Dave G ![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Sep 2008
Location: N/A
Posts: 420
|
i just wait till after xmas get all the stuff i need.thanks anyway
![]() Last edited by JACK98; 15 November 2013 at 20:05. |
![]() |
![]() |
#26 |
Amiga Tomcat
Join Date: Sep 2007
Location: Boston Lincs
Posts: 1,502
|
I've just had a quick play with Dos2Dos on WinUAE - it's not a program I've used before.
Have you installed Dos2Dos on your Amiga HD? If so when it starts you need to type in DF0: when it asks you for the device to be used. Type help or ? once the prompt comes back on screen. Dave G ![]() Last edited by davideo; 10 December 2008 at 23:53. Reason: Typo |
![]() |
![]() |
#27 |
Registered User
Join Date: Sep 2008
Location: N/A
Posts: 420
|
Finally received my replacement workbench disks.and hey presto the pco thingy worked,is there any way to compress the adfs onto the pc floppy on ms windows.so i can unpack them onto the amiga.i have 2 programs on the amiga trackreader and adf blizter(just waiting on my cf card come in post you see!)
Last edited by JACK98; 19 November 2015 at 23:54. |
![]() |
![]() |
#28 | |
Amiga Tomcat
Join Date: Sep 2007
Location: Boston Lincs
Posts: 1,502
|
Quote:
So if you've got a load of adfs on your PC you can copy them using a PC formatted floppy (720K) to the amiga and use adfblitzer to recreate the amiga disc. Does that make sense ![]() Dave G ![]() |
|
![]() |
![]() |
#29 |
Registered User
Join Date: Sep 2008
Location: N/A
Posts: 420
|
it does.but only prob is aren't adf files 880kb.and the pc floppy is 720kb.so i would need a compressor to compact the adf files on my pc.then to unpack some way on amiga?
Last edited by JACK98; 15 November 2013 at 20:05. Reason: correct grammar |
![]() |
![]() |
#30 | |
Global Moderator
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
|
Quote:
Use DMS. Remember this thread? http://eab.abime.net/showpost.php?p=491651&postcount=2 Use it just the same within WinUAE. ![]() |
|
![]() |
![]() |
#31 |
HOL/FTP busy bee
Join Date: Sep 2006
Location: Germany
Age: 46
Posts: 32,022
|
If DMS isn't enough (dms is still bigger than 720 KB) you can also try 7-Zip. Grab the Amiga version here : http://sourceforge.net/project/downl..._mirror=puzzle
![]() |
![]() |
![]() |
#32 |
Da Digger :)
Join Date: Nov 2008
Location: Monza, Italy
Posts: 2,822
|
IMPORTANT CLUE!
This is valid for Amiga 600 and WB 2.05 (with MultiDos), but it could be valid for WB 3.0 and CrossDos also. I found it when I tried to transfer some files from PC to my A600. When formatting a DD floppy on a PC, *don't* do it under Windows 2000/XP/Vista. Otherwise it will be formatted in a way that will give errors on Amiga. The Amiga will see the directory, but can't read/write files. The solution I found is this one: I formatted the floppy under real DOS (rebooting the PC with a booting DOS floppy). All went well. I suppose it's related with LFN (Long File Names). |
![]() |
![]() |
#33 | |
Global Moderator
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
|
Quote:
|
|
![]() |
![]() |
#34 |
Da Digger :)
Join Date: Nov 2008
Location: Monza, Italy
Posts: 2,822
|
He, Windows suxx!
![]() |
![]() |
![]() |
#35 |
Registered User
Join Date: Jun 2008
Location: planet earth
Posts: 1,115
|
back in the days, i was using msbackup ( http://www.computerhope.com/msbackup.htm ) and PCRestore ( http://aminet.net/package/disk/bakup/PCRestore ).
creating multi-disk backups of my amiga files on a dos/win box using msbackup with target a: . if one disk is full, it asks for second one and so on. on amiga side you just start pcrestore, its selfexplaining. there is also a "mwbackup". never used, but worth a look too. they should work using dosbox. so no need to leave xp. |
![]() |
![]() |
#36 |
Registered User
Join Date: Sep 2008
Location: N/A
Posts: 420
|
it worked a treat guys.i finally got off my backside and installed the workbench in winuae on my pc,and did the commands and they worked.i found an handy tool on an old amiga coverdisk to unpack the dms files for anyone that doesn't like using commands,disk is here*dms workbench*
http://amr.abime.net/issue_517_coverdisks Last edited by JACK98; 15 November 2013 at 20:05. |
![]() |
![]() |
#37 | |
Global Moderator
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
|
Quote:
It's good to see you got this problem sorted. ![]() DMS Workbench 2.02 was a nice find! ![]() ![]() prowler |
|
![]() |
![]() |
#38 |
Registered User
Join Date: Sep 2008
Location: N/A
Posts: 420
|
same.just laziness on my part,im entering the dms commands on winuae alright lol
Last edited by JACK98; 15 November 2013 at 20:04. |
![]() |
![]() |
#39 |
Registered User
Join Date: Sep 2008
Location: N/A
Posts: 420
|
my cf came in the post today.and it worked
![]() Last edited by JACK98; 15 November 2013 at 20:04. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Icon launch wont work | Jherek Carnelia | Coders. General | 6 | 26 August 2008 16:23 |
Catweasel MK4 - wont work | chaoticjelly | support.Hardware | 32 | 02 December 2006 22:23 |
The HD just wont work! | sence2001 | support.Hardware | 4 | 17 October 2004 23:34 |
Amiga Explorer wont work right! | chaoticjelly | New to Emulation or Amiga scene | 4 | 10 September 2004 22:38 |
DPaint wont work | jambomiga | support.WinUAE | 15 | 30 August 2003 00:48 |
|
|