![]() |
![]() |
#1 |
Junior Member
Join Date: Jan 2002
Location: PDX
Age: 62
Posts: 2,396
|
Gvp 4008+
I seem to have run into a problem. My GVP SCSI card seems to be non-functional now. I've installed it into all four Zorro slots and it does not work in any of them
![]() Now of course I either need to purchase another one or get something else entirerly. I can install the Amiga drive into one of my A500's and transfer all the data to my PC then back to the 4000 again if need be or even install the SCSI drive into a PC. I just visited GVP's web site and they have some other items for sale too. Is there a decent accelerator card with a built-in SCSI controller or is it better to get separate cards? Thoughts and suggestions on this would be appreciated ![]() |
![]() |
![]() |
#2 |
HOL / AMR Team Member
Join Date: Dec 2001
Location: Australia
Posts: 2,632
|
That's a hard question to answer without knowing what the specifications of your A4000 are right now (that is, CPU, graphics card, IDE devices etc.), and what you plan to use your A4000 for in the future.
|
![]() |
![]() |
#3 |
Junior Member
Join Date: Jan 2002
Location: PDX
Age: 62
Posts: 2,396
|
The specs are as follows:
030/25MHz CPU card, 2MB Chip, 16MB Fast, Multiface 3 I/O card. I've already ordered a Catweasal Zorro card, this includes a high speed floppy controller along with their Bhudda IDE controller and I believe IDEfix to run CD-ROM drives. I'm gonna stick with this setup and use it for games and to convert/archive my C64/128 software along with all my Amiga software. I'm gonna attempt to help out the CAPS project all I can. The GVP card seems to be toast, it fails the Amiga's diags and sometimes I get a guru with the board installed ![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2001
Location: Germany
Age: 51
Posts: 3,704
|
Just remove all other extensions and try the card on it´s own, worked for me and my GVP GForce Combo 040 at 40 Mhz.
![]() ![]() ![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Jan 2002
Location: PDX
Age: 62
Posts: 2,396
|
It looks like I may have had a HD failure as I'm trying to troubleshoot the drive now and it's not being recognized at all, but this could still be the SCSI controller, I'm gonna connect it to one of my 500's and see if it behaves the same way or not.
Thanks for everyones help in this matter, I think the 4000 riser card may have been dirty or not seated well. I removed it and cleaned the edge contacts and now the GVP controller can be seen, also the Multiface 3 board seems to have a problem with it now, it didn't used to ![]() |
![]() |
![]() |
#6 |
Junior Member
Join Date: Jan 2002
Location: PDX
Age: 62
Posts: 2,396
|
![]()
Okay here's what I figured out so far:
1) The GVP SCSI controller is fubar ![]() ![]() 2) The expansion ram on the card doesn't work either, no configuration from 2 to 8 MB works ![]() ![]() The bad part is that I had about 650MB worth of ADZ/ADF files that I was creating to archive and to transfer over to my PC for emulating ![]() Oh well, I was getting read to hook up my null-modem cable to get these disks burned to a CD-R as well, guess I'll wait for the Catweasal board so I can archive my Amiga and C64 stuff... |
![]() |
![]() |
#7 | |
Registered User
Join Date: Aug 2001
Location: Germany
Age: 51
Posts: 3,704
|
Re: Update
Quote:
![]() |
|
![]() |
![]() |
#8 | |
Junior Member
Join Date: Jan 2002
Location: PDX
Age: 62
Posts: 2,396
|
Re: Re: Update
Quote:
![]() |
|
![]() |
![]() |
#9 | |
HOL / AMR Team Member
Join Date: Dec 2001
Location: Australia
Posts: 2,632
|
![]() Quote:
the internal C= IDE controller (some even report it is a little slower). I have one myself and it's very handy in a standard A2000, (which has no IDE or SCSI controller). I think you've made a good choice picking the Catweasel/Buddha combo board since you want to play games and your internal IDE controller is at full capacity. Hope you like the board when you get it! |
|
![]() |
![]() |
#10 |
Junior Member
Join Date: Jan 2002
Location: PDX
Age: 62
Posts: 2,396
|
I'll be sure to keep everyone informed
![]() ![]() I'll have to take a snapshot of it once it's finished ![]() |
![]() |
![]() |
#11 |
Junior Member
Join Date: Jan 2002
Location: PDX
Age: 62
Posts: 2,396
|
Software Hut Order!
Okay, I've just received my Software Hut order, I'm reviewing the docs now and will soon be installed the board. Seems to be pretty straight forward however, the manufacturer neglected to put the board into an anti-static bag
![]() I'm sorry, I'm a computer tech and always use anti-static bags and workstations, you never know if that stray electron will zap some part you really want to work ![]() I'll post more info as I get it, stay tuned. BTW, where would be a good place to start a new thread for a review of the Catweasal board and other things about it? Nothing really fits except the Hardware prbs sub-board. I don't see a reviews section per se', hint hint RCK ![]() EDIT: Just great, I was finishing the config for the Catweasal board when my power went out. I have one of the under monitor power centers, the master switch just fried ![]() ![]() Last edited by jmmijo; 20 February 2002 at 23:16. |
![]() |
![]() |
#12 |
Administrator
Join Date: Feb 2001
Location: Paris / France
Age: 46
Posts: 3,099
|
ouaip
hum, I not really sure that all the future amiga hardware review will be huge, opening a new section for that is'nt a good idea imo
![]() just post it into general discussion ! (cause it's not a kind of prb) |
![]() |
![]() |
#13 | |
Junior Member
Join Date: Jan 2002
Location: PDX
Age: 62
Posts: 2,396
|
Re: ouaip
Quote:
![]() |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
need some help setting up a a4000 (cd drivr, gvp 4008) | sovietconscript | support.Hardware | 1 | 04 March 2012 22:13 |
GVP HD+ Not Booting... | PowerPie5000 | support.Hardware | 4 | 21 February 2011 20:56 |
GVP HD, Worth anything ? | Andy 01 | MarketPlace | 2 | 24 May 2010 12:59 |
Is a GVP 52 MB HD useful? | ATWindsor | support.Hardware | 10 | 17 April 2006 23:28 |
Gvp Hd-8+ | lauri_t | support.Hardware | 5 | 10 April 2006 03:12 |
|
|