Possibilty to use a Gotek with Flashfloppy and OSD (BluePill) with fWSI on CD32

Trigger58 · Today, 13:54

Hello,
it is possible to use Floppy disks with a CD32. All you need is a fWSI Wallstreet Modul. These module use a standard pc floppy drive. With a little wire and cutting 2 connections on gotek pcb, you can use it with the fWSI.

All the needed hardware to use a floppy is on the fWSI board itself. It is possible to mod this with an OSD Bluepill board?

Greetings from germany,

Trigger58

Daedalus · Today, 19:06

The Bluepill OSD mod runs from the display output on the Gotek and connects to the analogue RGB lines on the motherboard, so I don't see why it wouldn't work. The fWSI hardware probably doesn't have much to do with it, though you might be able to connect to the RGB lines there instead of on the CD32 motherboard if you wished.

Today, 13:54	#1
Trigger58 Registered User Join Date: May 2011 Location: Germany Age: 46 Posts: 87	Possibilty to use a Gotek with Flashfloppy and OSD (BluePill) with fWSI on CD32 Hello, it is possible to use Floppy disks with a CD32. All you need is a fWSI Wallstreet Modul. These module use a standard pc floppy drive. With a little wire and cutting 2 connections on gotek pcb, you can use it with the fWSI. All the needed hardware to use a floppy is on the fWSI board itself. It is possible to mod this with an OSD Bluepill board? Greetings from germany, Trigger58

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gotek Flashfloppy config	Octopus66	support.Hardware	8	19 December 2023 21:41
Flashfloppy with OSD issue	Vypr	support.Hardware	12	01 March 2021 19:43
Gotek OSD mod for a500s and a1200 (files included)	kipper2k	Hardware mods	2	25 August 2020 15:49
Gotek FlashFloppy ?	Washac	support.Hardware	7	18 July 2019 14:06
GoTek took a dump trying to reflash flashfloppy	Sinphaltimus	support.Hardware	6	09 October 2017 18:50

Today, 19:06	#2
Daedalus Registered User Join Date: Jun 2009 Location: Dublin, then Glasgow Posts: 6,413	The Bluepill OSD mod runs from the display output on the Gotek and connects to the analogue RGB lines on the motherboard, so I don't see why it wouldn't work. The fWSI hardware probably doesn't have much to do with it, though you might be able to connect to the RGB lines there instead of on the CD32 motherboard if you wished.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)