Amiga ATX Power Adapter Cables: A2000, A3000 and A4000

[amigakit.com]

New version of A2000 ATX Adapter cable at Amiga Kit Amiga Store: https://amigakit.amiga.store/product...roducts_id=998

A3000 ATX adapter cable also available: http://amigakit.amiga.store/product_...oducts_id=1164

A4000 ATX adapter cable available: https://amigakit.amiga.store/product...roducts_id=615

[raefamiga]

Hi I got one of the nice atx to a3000 cable but now I miss the extra cable to bring power to my elbox doughterboard is it posible you make me one?

[amigakit.com]

@raefamiga

That maybe possible- send us an email. Thanks.

[alexh]

This is good news they are back in stock.

@Amigakit, A4000D owners who buy these will probably want/need additional 3D plastics to hold the on/off switch. Would you consider designing some 3D plastics to sell with your A4000D ATX adapter?

The original A4000D PSU button I *think* came in two parts, the button, and a very long bit of plastic that reaches from the front of the case to depress a switch integrated into the original A4000D PSU itself.

https://cults3d.com/en/3d-model/gadg...-extension-bar

https://www.shapeways.com/product/RJ...-to-amiga-4000

ATX PSUs don't have such switches, they are integrated into the PC case and wire to the ATX PSU via the motherboard.

So how about a replacement 3D printed A4000D power button with integrated switch that works with the A4000D case + standard ATX PSU + your adapter cable?

Looking at the case there appears to be a square in the metal case where the rod passes through. A 3D bracket that goes through that hole in the case to mount the switch would work? Perhaps with a much shorter bar if the switch itself is not long enough when mounted here?

https://i.imgur.com/684UgqT.jpeg