21 July 2024, 05:32 | #1 |
Registered User
Join Date: Jun 2024
Location: Auckland, New Zealand
Posts: 5
|
Building a HDF image for PIStorm32 Lite (Mushashi)
Hello!! :-)
So I thought I would be smart and use WinUAE to build a HDF image for my Mushashi deployment on PIStorm and spent a long time buiding a workbench 3.2.1.1 in Win-UAE and it works wonderfully. Copied it to my PIstorm over SCP and it Pistrom starts - but wont boot from this this HDF. So, after getting super annoyed over the course of a few hours as I searched for an answer - only to find that the only support PiSCSI HDF's with "it is a full drive RDSK/RDB image," ?? https://github.com/captain-amygdala/...s/amiga/piscsi Which is the annoying bit as the HDF I made did not have this setting and looks like I need to redo it So does anyone know of a good guide for building HDF's for Pistorm32? Help is always good. thanks! Andy |
21 July 2024, 05:33 | #2 |
Registered User
Join Date: Jun 2024
Location: Auckland, New Zealand
Posts: 5
|
Yes in case some asks -
"Yes - I updated my config file for enable PISCSI and also Added the HDF file inside the config as well. |
21 July 2024, 10:42 | #3 |
Registered User
Join Date: Sep 2019
Location: Australia
Posts: 44
|
The best guide I can give you is not to use Musashi at all. It's not been updated in quite a while and is slower and less compatible than Emu68, albeit it does not work with HDFs. Is there a particular reason you are trying to use this? If you use the disk partitions Emu68 uses then you can mount this in WinUae if needed
A guide for setting up a card for Emu68 is here: https://michalsc.github.io/Emu68/tut...eparation.html |
21 July 2024, 20:44 | #4 | |
Registered User
Join Date: Jun 2024
Location: Auckland, New Zealand
Posts: 5
|
I can understand that - but the reason was to create my hard drives in a WinUAE then export/SCP to the card.
I have used Emu68K but having to remove the SD card each time I want to update it rather than SSH into it, is a bit of a pain. But I will go back to this. Quote:
|
|
22 July 2024, 03:15 | #5 |
Registered User
Join Date: Sep 2019
Location: Australia
Posts: 44
|
Emu68 now allows for Wifi via the pi so you can set up a samba share and transfer files to and from the Amiga. Not as seamless as wiping out the whole drive and rewriting from a PC but certainly works. Other option is a fat32 formatted compactflash card in the PCMCIA slot via an adapter to transfer files.
|
22 July 2024, 08:03 | #6 | |
Registered User
Join Date: Sep 2016
Location: Netherlands
Posts: 112
|
Quote:
Share the downloads folder on my PC. Mount the FAT32 partition on Amiga via a Toolsdaemon entry I've made. Mount the smb2fs network share via a Toolsdaemon entry I've made. Download new Emu68 version to the Amiga (it's only one file anyway). Power cycle Amiga or trigger a hard reset for Emu68. Done in seconds Last edited by Mr-Z; 22 July 2024 at 08:10. |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PiStorm32 Lite and CF card | rabidgerry | support.AmigaOS | 31 | 22 May 2024 21:48 |
PiStorm32-Lite problems | tech3475 | support.Hardware | 52 | 23 October 2023 17:49 |
PiStorm32 Lite for Amiga 1200 at AmigaKit.com | amigakit.com | MarketPlace | 7 | 21 August 2023 18:54 |
PiStorm32-Lite RTG setup | cwa107 | support.Hardware | 5 | 10 May 2023 20:59 |
Pistorm32 Lite - Cheap (EU) | alexh | MarketPlace | 1 | 20 April 2023 11:23 |
|
|