![]() |
![]() |
#1 |
Registered User
Join Date: Feb 2021
Location: Portugal
Posts: 47
|
Recapped a 1200, no keyboard
Hi,
I recapped my amiga 1200. The machine boots off a compact flash HD, I have video, mouse but no keyboard. (I did not connect the floppy but from previous tests I know it tries to boot off from it) I checked the connector on the mother board with a magnifying len, and it seems ok. I tried two different membranes, but still nothing when I press any key. What do you suggest I do to try to find the fault that is preventing keys from being registered ? I have electronics tools like multimeters, oscilloscope and such. Thanks, Regards |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2017
Location: Ireland
Posts: 777
|
Did the keyboard register before you recapped the board?
|
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2021
Location: Portugal
Posts: 47
|
yes
|
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2017
Location: Ireland
Posts: 777
|
It could be a faulty keyboard MPU or more likely a broken trace caused by the recapping.
|
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2021
Location: Portugal
Posts: 47
|
Indeed I broke a pad while recapping, but I repaired it with a piece of wire. Maybe the job was not done correctly. Itas on the C304 negative pad.
According to the amiga PcB explorer the brokn pad is in the -AV circuit pad. |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2022
Location: UK South East
Posts: 94
|
That is a de-coupling cap for the +/- 12V for the audio op amp. Unless there was other damage nearby it will only impact the audio not the keyboard.
|
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2004
Location: Yorkshire
Posts: 772
|
I'd check continuity around the Keyboard MPU, none of the capacitors are really around anything keyboard related apart from the audio one directly behind the connector. Maybe it was just corrosion and the act of moving the board around to solder has severed something?
Perhaps it could be the voltage detector (U49) that is faulty but it's probably a long shot. Last edited by Mick; 18 July 2024 at 12:28. |
![]() |
![]() |
#8 |
Hardware Designer
Join Date: Aug 2018
Location: Bialystok/Poland
Age: 51
Posts: 184
|
Check Y621 component, which is a ceramic resonator. It generates 3 MHz clock signal driving the keyboard MPU. Presence of the signal may be checked with an oscilloscope.
|
![]() |
![]() |
#9 |
Registered User
Join Date: Feb 2021
Location: Portugal
Posts: 47
|
I found the problem. It was a noob mistake.
I put the keyboard connector retainer the wrong way around. I reversed it and now I have a keyboard. |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga 4000D 030 Recapped with 8GB CF Card, keyboard & moniitor | NunoUFO | MarketPlace | 4 | 15 July 2024 11:26 |
Amiga 1200 - Recapped - Refurbished | RetroPassionUK | MarketPlace | 5 | 31 January 2019 17:35 |
For Sale: Amiga 1200, Recapped, 3.1 Roms | RetroPassionUK | MarketPlace | 2 | 14 January 2019 20:18 |
1200 Keyboard membrane | Megamix | MarketPlace | 0 | 28 June 2015 20:35 |
Should I get my 1200 recapped or not? | daro2096 | support.Hardware | 34 | 12 February 2013 11:02 |
|
|