15 July 2024, 02:08 | #1 |
Registered User
Join Date: Nov 2020
Location: San Francisco
Posts: 2
|
Problems connecting external CD-ROM and CF HD on A1200 with 4xIDE Buffered Interface
Hi everyone,
I have an Amiga 1200 and I am trying to connect an external CD-ROM drive alongside my CF hard disk. Years ago, I managed to do this using the old version of the 4xIDE buffered interface (which I really miss), which worked perfectly. Unfortunately, I now have the newer version from Amigakit, and have never been able to figure out how to use it. The way the connectors are placed makes it extremely hard to plug it in correctly. I did various tests, but when I turn my Amiga on, either the CF hard disk won’t boot or the CD-ROM drive won’t be recognized. I have many IDE cables, both 2.5” and 3.5”, and nothing seems to work. Unfortunately, from what I see from this photo, I may be missing the right cable: https://wiki.amiga.org/images/b/be/A..._installed.jpg My problem is that this seems to be a custom cable, which I can’t find online. As you can see, the red pin connected to the Amiga motherboard is on the left side, and it passes under the buffered interface, and then gets connected to it with the red pin still on the left side. All standard IDE cables would have the pin ending on the right side. It looks like this could be a cable with a twist. To try to avoid this issue, I also tried to rotate the interface, but the cables and the CF adapter cause a bulk, and there is no space for the keyboard ribbon, which also prevents me from closing the case. What am I doing wrong? Where can I find this cable? Thanks for your help! Laura |
15 July 2024, 10:59 | #2 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,047
|
Indeed the cable on the photo has the second connector in an unusual orientation. But for a first test you should be able to use the cable you have. Just make sure that the red line of the cable connects pin 1 on the mainboard to pin 1 on the splitter.
Also note that there are two "port 0" on the splitter, one 2.5" and one 3.5". They are shortened, which means you can use only one of them. If you connect the CF card to the 2.5" Port 0, the CD drive needs to go to Port 1. And it will only be seen if you install the software to activate the second port. (theoretically you could use a master device on the 2.5" port 0 and a slave on the 3.5" port 0, so that both are seen without installing software. But this only works if your CF card reader has a master/slave switch *and* the CF card supports slaves.) |
16 July 2024, 20:37 | #3 |
Registered User
Join Date: Nov 2020
Location: San Francisco
Posts: 2
|
Hi Thomas,
Thank you for your reply! You were absolutely correct, and the "mystery" has been solved. The 4xIDE buffered interface indeed requires a specific 2.5" HARD DRIVE 44-WAY CABLE (15CM) with connectors facing opposite directions. I'm lucky I didn't cause a short circuit on my A1200 motherboard by using a standard one! Chris from Amigakit has been great, not just this time but also over the years when I've had problems and needed help. He found the right cable for me and I've now ordered it from his website. Next, we'll have to tackle the problem of plugging CF and CD-ROM drives together on the interface. I read there are some issues. I'm willing to go back to using my old 2.5" HDD if there are issues with the CF but the internal lack of space is another thing that worries me. Plus, it's not ideal, especially now that I've installed the TerribleFire 1230 and there may be overheating issues. It would be a temporary solution until I mod the A1200 and install an internal CD-ROM drive. I'm also learning about Pistorm from Chris: it's a totally new world for me, but I think it’s worth exploring at some point! Thanks again for your help! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A1200/A600 4xIDE Buffered IDE Interface from AMIGA KIT | amigakit.com | Amiga scene | 54 | 14 March 2023 12:00 |
4xIDE Buffered IDE Interface | xalakibaniou | support.Hardware | 9 | 02 May 2020 10:45 |
4xide buffered interface position | Foul | support.Hardware | 19 | 02 June 2010 08:45 |
IDEFIX Buffered Interface Problems (A600) | DrF | support.Hardware | 22 | 10 September 2007 19:18 |
Dataflyer CD-XDS External CD-ROM for A600/A1200 on eBay Only $25!!! | adolescent | MarketPlace | 0 | 20 April 2002 17:43 |
|
|