![]() |
![]() |
#5561 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,055
|
|
![]() |
![]() |
#5562 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,980
|
You need to clean the inside of the pins too. Strip down a q-tip or something to get inside and if you see black gunk still coming up, keep at it.
The other part is that whatever power supply you are using, has at least 20A on the 5V rail, that is not tied to the 12V load. If you have a multimeter measure the 5V on the edge of the motherboard next to the RAM. The loose rule of thumb is if this is less than 4.85V then you are likely in for some problems, but depending on the power supply less can still work just fine. |
![]() |
![]() |
#5563 |
Registered User
Join Date: Jan 2023
Location: Oosterwolde/Netherlands
Posts: 24
|
So did a full clean.. Did not help. Was also not dirty.
When I connected the floppy (which was disconnected for all the testing) it was really really unstable. So yes that should be the psu.. So just bought a bracket and some cables to connect an atx.. |
![]() |
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
WANTED: PCI Sound Card VORTEX2 SuperQuard / SQ2500 or Turtlebeach SantaCruz pci card | keropi | MarketPlace | 12 | 15 March 2017 02:48 |
Wanted:Sonnet Technologies QuadDoubler 50 (Doubler 4000) | kronuz | MarketPlace | 0 | 16 June 2013 00:29 |
eBay : Sonnet Quaddoubler | alexh | MarketPlace | 3 | 07 May 2013 00:50 |
Overlay problem on GeForce 7200 | Leandro Jardim | support.WinUAE | 1 | 10 August 2010 15:50 |
Prometheus PCI & Voodoo 3 PCI GFX Card | Slayer | support.Hardware | 21 | 05 September 2006 10:57 |
|
|