![]() |
![]() |
#1 |
Registered User
Join Date: Jul 2018
Location: Stockholm / Sweden
Posts: 261
|
MiamiDX or Ariadne-II dropping connection. [SOLVED]
Getting a bit annoyed here.
Trying to make a backup of my A4000 harddrive through Amiga Explorer to my main PC, choosing the hardfiles. After some time I lose the connection for some reason. It can take 15 minutes or it can take an hour. MiamiDX still says it's online but the connection is down. I've checked all settings and it should never disconnect as it's configured. So, I'm at a loss as to why. All I can think of right now is that my Ariadne-II is overheating and causing the issue. Besides that I have no clue. Last edited by Liqourice; 27 June 2024 at 14:33. Reason: Solved! |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2018
Location: Stockholm / Sweden
Posts: 261
|
It's not due to overheating. Opened the case to get better ventilation but that didn't make any difference.
Gonna try the MNI driver instead of Sana-II |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2005
Location: France
Posts: 531
|
I had this issue with Amiga Explorer before, which i wanted to use for the same reason of backup of my own A4000 to Windows 10 PC. Using Miami and an USB NIC on my Deneb. The Amiga connexion is perfectly steady with no problem.
But Amiga Explorer was really slow and finally dropped connection. The support team from Cloanto could not find a solution and finally they refunded my the software as it was useless. I don't think the Ariadne is at fault. Even if it is not a really fast card, it is simple design with no known issue. |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2018
Location: Stockholm / Sweden
Posts: 261
|
Well, I've tried with the MNI driver now and so far it seems to be a lot more steady and also a little bit faster. We'll see how it turns out.
If I had had an IDE port in my PC I could just have moved the drive but I don't, to modern for that. |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2018
Location: Stockholm / Sweden
Posts: 261
|
Been rock solid now and I've copied half of the partitions. So, the problem was the SANA-II driver, with the MNI one everything seems to work perfectly.
Problem solved. |
![]() |
![]() |
#6 |
Registered User
Join Date: Aug 2005
Location: Skarabörg, Sweden
Age: 45
Posts: 1,038
|
Sounds like you got it working but you could also try Roadshow, might give better speed.
|
![]() |
![]() |
#7 | |
Registered User
Join Date: Jul 2018
Location: Stockholm / Sweden
Posts: 261
|
Quote:
Doubtful if Miami is the reason of the low speed since I get decent speed with Ibrowse and FTP. More likely Amiga Explorer that's the issue there. But every little bit helps of course. |
|
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2005
Location: Skarabörg, Sweden
Age: 45
Posts: 1,038
|
|
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,056
|
You can accelerate Amiga Explorer a lot if you increase block size. By default it is set to 512. It becomes much faster if you set it to 32768. IIRC you have to change it on both ends, that is in the AExplorer tooltypes on the Amiga as well as in the Amiga Explorer properties on Windows.
|
![]() |
![]() |
#10 | |
Registered User
Join Date: Jul 2018
Location: Stockholm / Sweden
Posts: 261
|
Quote:
That's kinda hard when I want to make backups of the Amiga HDD. ![]() |
|
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2002
Location: Germany
Posts: 7,056
|
Not the HDD block size. The size of data blocks transferred by AE. Check tooltypes (icon information) and properties as mentioned.
Code:
CONNECTION=AUTO SERDEVICE=serial.device SERUNIT=0 SERBAUD=19200 TCPLIBRARY=bsdsocket.library TCPPASSWORD=AExplorer TCPCLIENT=AUTO TCPSERVER=AUTO PACKETSIZE=512 <==== RETRIES=50 OVERRIDEPROTECTION=NO ADFVERIFY=YES LOGGING=NO LOGFILE=T:AEXPL_A.LOG QUIET=NO DONOTWAIT UNIT=0 |
![]() |
![]() |
#12 | |
Registered User
Join Date: Jul 2018
Location: Stockholm / Sweden
Posts: 261
|
Quote:
Ah, you mean in Amiga Explorer. I thought you ment on the drives. ![]() |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help install Retina BLT Z3 & Ariadne II | iowtheme | support.Hardware | 9 | 11 November 2019 17:09 |
Ariadne II & OS 2.1 | Pheonix | support.Hardware | 2 | 01 November 2016 17:07 |
Ariadne II Setup in Amiga 4000 | edd_jedi | support.Hardware | 7 | 06 July 2015 09:20 |
ariadne II manual needed | amigagenie | support.Hardware | 6 | 31 January 2013 18:26 |
FS: Zorro II/III cards - XSurf3, Ariadne, PicassoIV, MFC3 | mabus | MarketPlace | 1 | 04 April 2009 11:30 |
|
|