![]() |
![]() |
#1 |
Registered User
Join Date: Jun 2024
Location: USA
Posts: 3
|
A1200 + Demos ..
Hey all, I've finally received all parts to my A1200 setup...or so I thought. I've been doing OK thus far with my gotek & adf/lha files but browsing a couple of the top amiga demos on pouet has opened new can of worms e.g. .dat & .exe. files. Seems I'm still missing pieces here (harddrive to simply click the exe's?)..
Below is what I'm dealing with hardware-wise:
One option I saw was ADFOpus (create my own adf of demo files to then transfer via gotek > mount > double click & run) but the created ADF doesn't want to accept any files. This is on Win10; did not check if app supports win10 but nonetheless this seemed a dead end Another option was WinUAE...but truthfully have not done more than look at that casually, as this amiga's primary purpose is an instrument in a DAWless setup so unfortunately something like running demos isn't going to warrant adding Windows apps to my config if at all possible. I'd be more inclined to get an A500 or etc. down the line just for running demos if that were the case Any options I am blanking on? I did think I could probably pull the CF card's SD card & transfer files, replace it & reassemble case...significantly more work intensive than I was hoping for but in theory that should work. |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2024
Location: USA
Posts: 3
|
Oceanmachine & starstruck are some of the top demos on pouet under Amiga AGA & both come in .exe format, which fails to load on my gotek so currently no way to transfer it over in order to run (don't even want to think about the ones with multiple /dat folders and/or how I'm to deal with multi-desk demos yet
![]() I was able to get HXCFE loaded & transferred a demo over (starstruck) though that failed (program failed #8000000B, same error from shell w/o startup sequence or launched from workbench). I did run 'setpatch' prior to trying the .exe cmd based on another search result I found. Thank you much! Even though this one failed, it is just 1 and thus could be an outlier whereas before I could not load these files at all before. Going to repeat this for few other demos to see how my luck fares (it accurately warns you how long hxcfe takes to copy!) |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2003
Location: Italy
Posts: 119
|
Those are 060 demos, unfortunately they won't run on your setup
|
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2024
Location: USA
Posts: 3
|
Dang, well thank you for pointing that out - assuming 060 is processor then. If re-looking at pouet prod listing I do see 060 references in the comments but maybe thought that'd be specified elsewhere or via the filtering (was using "Amiga AGA" as platform FWIW)
|
![]() |
![]() |
#6 |
Registered User
Join Date: Jan 2015
Location: australia
Posts: 587
|
It's stated in the file_id.diz on the scene.org page;
================================== Hardware requirements: Chipset: AGA Amiga CPU: 68060 @ 50MHz or faster RAM: ~50MB fastram, 2MB chipram Display: 15kHz PAL monitor |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best A1200 demos? | Lektroid | Amiga scene | 11 | 19 August 2020 12:40 |
How can I get my A1200 to run A500 demos? | Foebane | support.Hardware | 30 | 25 February 2018 13:48 |
A1200 dealer demos - Dreamline Design | moufassa | request.Demos | 1 | 06 December 2012 00:49 |
Demos using HAM on A1200 | Vollldo | request.Demos | 7 | 03 October 2010 13:07 |
Slowdowns on lots of pre-A1200 demos | UberFreak | project.WHDLoad | 1 | 14 February 2010 19:27 |
|
|