20 September 2023, 14:16 | #461 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,956
|
There is no 4GB limit with compactflash.device
|
20 September 2023, 14:23 | #462 |
Registered User
Join Date: Apr 2022
Location: Australia
Age: 52
Posts: 941
|
|
20 September 2023, 16:33 | #463 |
MI clan prevails
Join Date: Jul 2010
Location: Belgrade, Serbia
Posts: 1,443
|
In theory.
But in praxis you will often hit that invisible wall. I have two 8GB cards and they will use only 4GB. I couldn't make them use the full 8. |
21 September 2023, 02:48 | #464 |
Registered User
Join Date: Feb 2023
Location: AUSTRALIA
Posts: 44
|
thanks for the info! I've got a Blizzard 1230 IV so the ram shouldn't be a problem, but if I dont need to upgrade, I wont bother.
I went with the 16 Gig as they sold it in the pack and it wasn't much more money, so I figured it must work. Not too worried if it can only address 4gb, still more than enough really. I'm keen to try my other reader and cards now to see if it was a formatting problem. Just stoked to be able to get files over without messing with adfs. Can you still load an adf if you transfer it over with the CF card though? |
21 September 2023, 09:02 | #465 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,956
|
Did you investigate what kind of geometry these cards report? At the very least it might be a good idea to send a cfddebug output to the author of compactflash.device.
|
03 May 2024, 21:11 | #466 |
Registered User
Join Date: Jun 2023
Location: information superhighway
Posts: 2
|
Hi all, I skimmed through the last few pages of the thread and I'm getting a similar issue I can't diagnose with my setup...
I've got an A600 with ACA620 maprom 3.1.4 softkick, default memory setting, WB 3.1.4 with BestWB. I've checked I have CFD 1.33 and Fat95 3.18 in the correct places. I edited my CF0 mount file to have "Flags = 2". Trying to use it with 3 different CF cards none of them produce a disk (CF0 mounted, no disk inserted), so I bought the same SD->CF adapter pictured in the CFD133.lha and with a 2GB SD in it that one does show "CF0:Unreadable", so it detects a disk but incorrect file system. I've tried formatting the card, both the bare SD and in the CF adapter, both in Windows and in Linux, both as FAT16 and FAT32, to no avail. In all cases the card works fine on the machine I format in. I tried formatting in the Amiga but I get "object is not of the required type", which I'm not sure how to solve. Does anyone know what else I could try? Thanks! |
04 May 2024, 10:24 | #467 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,956
|
Do you have a TCP/IP stack autoloading that would attempt to use the PCMCIA slot? Disable if so.
Did you try it also without Flags = 2? |
04 May 2024, 12:40 | #468 |
Registered User
Join Date: Jun 2023
Location: information superhighway
Posts: 2
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Using a Compact Flash card on a600/a1200 IDE | Smiley | support.Hardware | 744 | 22 March 2023 18:09 |
compact flash pcmcia not working in a1200 | GurjSagoo | support.Hardware | 9 | 02 April 2018 21:01 |
Slow PCMCIA>Compact Flash speeds | radiokida | support.Hardware | 5 | 02 May 2013 17:00 |
Compact Flash PCMCIA on an A600 | sdaonline | New to Emulation or Amiga scene | 3 | 13 February 2011 04:30 |
How To Get A600 To Read Compact Flash Card ? | Rich M | Amiga scene | 5 | 02 May 2005 06:56 |
|
|