isomount help

[ScottC2010]

Thought i'd have a go with isomount having suggested it on another thread
I have got so far with it (had to find out how to make it executeable - type in protect DH0:Workbench:c/isomount +se) but now it asks to insert a volume and messagebox with assign on - any ideas what i need to do next?

[Channel-Z]

Type info in the shell and see what it says for mounted drives:

[ScottC2010]

It's not appearing in there, I have added cachecdfs (I forgot to add this) but then i just get a request saying 'cannot open filedisk.device unit 23409238 or some other random number

Rexx is running

[ScottC2010]

I've found a later version (1.2.4 as I was using 1.2.3) and this gives an output that may help:

[Channel-Z]

Is filedisk.device in the Devs drawer?

[ScottC2010]

Oh - i think it's in DosDrivers!

[ScottC2010]

Fab - that worked!!!

[ScottC2010]

Amazingly - i am now running a CDTV iso

Case of the Caution Condor is running

[Channel-Z]

Sweet!!

[ScottC2010]

I'll try some CD32 next...

[ScottC2010]

Any way of exiting the game other than rebooting (ie it there a force close on amiga)?

[Samurai_Crow]

Not unless you run WHDLoad or some similar patcher. Most games completely bypass the OS. A warm boot is triggered by Control-leftAmiga-rightAmiga if that's what you want.

[ScottC2010]

Ok, thank you, Microcosm did not work - Just got Internal Hardware Error (I tried turning off the fastmem too) But I managed to make a boot disk from the Dev Toolkit for that one (It works although a little slow!)

[ScottC2010]

Originally Posted by Boing-Ball

A lot of the CD32 games require the CD32 “Akiko” chip set. Which the A1200 does not possess. It has been noted if you use something like a Archos/Zappo PCMCIA drive or similar that only 70% of CD32 games will work..

I used my internal hard disk - but it does work if i use the boot disk from the developer kit, so there might be something in the srtup?