EaglePlayer and 68060.kibrary

tygre · 08 March 2022, 23:10

Hi there, especially to the experts in '060!

As I explained in another thread, EaglePlayer causes MuForce (and Enforcer) hits when playing .IT files. These hits only happen on my '060, not on my '040. After many experiments, I could narrow down the problem to the '060 and, maybe?, the 68060.library?

On my '040, EaglePlayer starts fine and can play .IT files well.
On my '060, when booting with SetPatch and running MuForce (or Enforcer), there is some video trashing when EaglePlayer starts and it causes hits when playing .IT files but it can play other types of modules well.
On my '060, when booting without SetPatch, there is no video trashing when EaglePlayer starts (but then I cannot play any module because it crashes with 8000 003D because the 68060.library is not loaded).

(I'm using EaglePlayer v2.06, SetPatch v45.15 and 68060.library v46.5.)

So, it seems that there are some bad interactions between EaglePlayer and the '060, doesn't it? Or are they due to my versions of SetPatch/the 68060.library?

Cheers!

Leon Besson · 08 March 2022, 23:41

Which accelerator are you using?

tygre · 08 March 2022, 23:54

A Blizzard 1260

Leon Besson · 09 March 2022, 01:26

Quote:

Originally Posted by tygre

A Blizzard 1260

So instead of using ThorsMMU setup. Have you tried using the standard 060 Blizzard library?

tygre · 09 March 2022, 02:45

Hi Leon!

Great idea but no joy

I replaced Thor's 68060.library with the v43.1 from Phase5 but with exactly the same behaviour: video "trashing" when starting EaglePlayer and MuForce hits when playing .IT files...

Any idea?

Thomas Richter · 09 March 2022, 12:36

Without further information, there is nothing to do. You need to:

-install the disassembler.library
-install SegTracker
-Run SegTracker in your startup-sequence
-Enable the "DisPC" option in MuForce
-Provide the details on the hit, i.e. the output of MuForce, either through Sashimi, or through a serial terminal connected by a null-modem cable at 9600 8N1, or through "Syslog" (as of Os 3.2) which can be enabled in the boot screen, and which will write its output to RAM:

tygre · 09 March 2022, 15:49

Hi Thomas and thank you for your reply!

Actually, I already did all that

I put the "hits" in this other thread: let me know if they contain all the info. that you need?

Cheers!

08 March 2022, 23:10	#1
tygre Returning fan! Join Date: Jan 2011 Location: Montréal, QC, Canada Posts: 1,442	EaglePlayer and 68060.kibrary Hi there, especially to the experts in '060! As I explained in another thread, EaglePlayer causes MuForce (and Enforcer) hits when playing .IT files. These hits only happen on my '060, not on my '040. After many experiments, I could narrow down the problem to the '060 and, maybe?, the 68060.library? On my '040, EaglePlayer starts fine and can play .IT files well. On my '060, when booting with SetPatch and running MuForce (or Enforcer), there is some video trashing when EaglePlayer starts and it causes hits when playing .IT files but it can play other types of modules well. On my '060, when booting without SetPatch, there is no video trashing when EaglePlayer starts (but then I cannot play any module because it crashes with 8000 003D because the 68060.library is not loaded). (I'm using EaglePlayer v2.06, SetPatch v45.15 and 68060.library v46.5.) So, it seems that there are some bad interactions between EaglePlayer and the '060, doesn't it? Or are they due to my versions of SetPatch/the 68060.library? Cheers!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Issues with Eagleplayer	Tigerskunk	support.Apps	9	06 April 2020 12:51
EaglePlayer V2.04 as final?	Promax	request.Apps	1	18 August 2010 01:22
Eagleplayer question	kkgarbod	support.Apps	1	23 May 2010 13:11
EaglePlayer	DyLucke	request.Apps	2	27 December 2009 14:15
Eagleplayer Configuration	Npl	support.Apps	5	19 October 2009 21:37

08 March 2022, 23:41	#2
Leon Besson Banned Join Date: Feb 2022 Location: Anywhere and everywhere I have a contract Posts: 822	Which accelerator are you using?

08 March 2022, 23:54	#3
tygre Returning fan! Join Date: Jan 2011 Location: Montréal, QC, Canada Posts: 1,442	A Blizzard 1260

09 March 2022, 02:45	#5
tygre Returning fan! Join Date: Jan 2011 Location: Montréal, QC, Canada Posts: 1,442	Hi Leon! Great idea but no joy I replaced Thor's 68060.library with the v43.1 from Phase5 but with exactly the same behaviour: video "trashing" when starting EaglePlayer and MuForce hits when playing .IT files... Any idea?

09 March 2022, 12:36	#6
Thomas Richter Registered User Join Date: Jan 2019 Location: Germany Posts: 3,330	Without further information, there is nothing to do. You need to: -install the disassembler.library -install SegTracker -Run SegTracker in your startup-sequence -Enable the "DisPC" option in MuForce -Provide the details on the hit, i.e. the output of MuForce, either through Sashimi, or through a serial terminal connected by a null-modem cable at 9600 8N1, or through "Syslog" (as of Os 3.2) which can be enabled in the boot screen, and which will write its output to RAM:

09 March 2022, 15:49	#7
tygre Returning fan! Join Date: Jan 2011 Location: Montréal, QC, Canada Posts: 1,442	Hi Thomas and thank you for your reply! Actually, I already did all that I put the "hits" in this other thread: let me know if they contain all the info. that you need? Cheers!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)