JIT crash

White · 15 July 2018, 09:25

Hi, Toni
With this configuration file winUAE 3.6.1 - 4.0.1 as soon as I mount a df0:
it crashes.
My configuration is probably wrong.
I hope it is useful for your work.
Thanks for your last beta.

AMIGASYSTEM · 15 July 2018, 12:24

Quote:

Originally Posted by White

Hi, Toni
With this configuration file winUAE 3.6.1 - 4.0.1 as soon as I mount a df0:
it crashes..

Paolo ho provato la tua configurazione "TutorialAFAOS-OK.uae" e non ho alcun crash sia nel montare floppy FFS/OFS che FAT, utilizzo WinUAE 32Bit. Il tuo problema potrebbe essere il floppy corrotto/infetto o qualcosa di corrotto nel sistema operativo.

----------------------

Paolo i tried your configuration "TutorialAFAOS-OK.uae" and I have no crash in either mounting FFS / OFS or FAT floppy, use WinUAE 32Bit.
Your problem could be the corrupt / infected floppy or something corrupted in the operating system.

White · 15 July 2018, 13:17

Hi AMIGASYSTEM,
Thanks for the reply,
The same .hdf the same df0: etc. they work with this configuration with windows 7 64bit.
this is the working configuration, the one above gives me error when I mount a df0:
Hello thanks again.

this work:

Toni Wilen · 15 July 2018, 17:07

JIT crash (bad code, stack overflow etc..). No useful information available. (and if it happens with 3.6.1, why did you post it in 4.0.1 thread?)

White · 16 July 2018, 10:39

Hi Toni,
it happens with version 3.6.1 and also with version 4
If it is useful, what can I post?
Thank you.

Toni Wilen · 16 July 2018, 11:06

All beta threads have same rule, mentioned in first post: only if bug is introduced in same beta series. Old bugs = Always separate thread.

What happens if you don't have JIT enabled?

White · 16 July 2018, 11:17

Toni,
with the JIT disabled working, it does not crash
with version 3.6.1
I also try with version 4?

Toni Wilen · 16 July 2018, 11:25

Try also 32-bit version. 32-bit JIT is not same as 64-bit.

White · 16 July 2018, 11:34

With the 32bit version I get the same error.
Only disabling the JIT works

Toni Wilen · 16 July 2018, 12:28

What do you mean by "mount df0:"? Insert disk in df0: after booted to WB? Or boot from df0?

White · 16 July 2018, 12:50

Only when the system is started
The boot with the workbench3.1 df0: works without problems

Toni, this only happens with this configuration that could be wrong.
As I said it could be wrong
A new configuration solved this problem.

Toni Wilen · 16 July 2018, 15:09

Even if config is bad (it looks fine), it still shouldn't crash this way..

First set to windowed mode (easier to test).

- Remove harddrive. Still crashing? (if it is, keep HD removed in next tests)

- Remove RTG board. Still crashing?
- Remove Z3 RAM board. Still crashing?
- Remove both RTG and Z3 RAM board. Still crashing?

White · 16 July 2018, 17:12

Always with the "bad" configuration
Removing the .hdf with the JIT activated
it works no problem.
I also did the other tests for safety, everything works
Cd iso and df0: they work

Toni Wilen · 17 July 2018, 08:43

If removing HDF "fixes" it, it could be something to do with used filesystem(s) in RDB because RDB filesystem is the only code that runs (from HDF) if there is bootable disk in DF0:.

White · 17 July 2018, 11:00

Toni, Thanks
I look at the .hdf better to see if anything makes it incompatible I'm using sfs / 02 as filesystem,
Thanks again.

Toni Wilen · 17 July 2018, 11:28

Remember to keep backup of the HDF! It may be needed for debugging later.

White · 17 July 2018, 11:32

All right, thanks for the advice.

White · 18 July 2018, 08:42

Hi Toni,
With the Tutorial-AFAOS-OK configuration
oddly if I select ppc together with the JIT df0: it works perfectly.
The version used for the test is the last 4.0.1 final 64bit

White · 18 July 2018, 16:39

If it can be useful I attach the used .hdf
they are two uncompressed gigabytes already divided into two partitions
compressed are 92 megabytes in this case the partitions are empty.
Already divided into two Amiga and Work with sfs / 02 filesystem
It is ready for the wb3.9 with the boot floppy and is recognized exactly.

https://tinyurl.com/y7gn4zt2
thank you.

15 July 2018, 09:25	#1
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	JIT crash Hi, Toni With this configuration file winUAE 3.6.1 - 4.0.1 as soon as I mount a df0: it crashes. My configuration is probably wrong. I hope it is useful for your work. Thanks for your last beta. Last edited by White; 09 January 2021 at 18:12.

15 July 2018, 13:17	#3
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Hi AMIGASYSTEM, Thanks for the reply, The same .hdf the same df0: etc. they work with this configuration with windows 7 64bit. this is the working configuration, the one above gives me error when I mount a df0: Hello thanks again. this work: Last edited by White; 09 January 2021 at 18:11.

18 July 2018, 08:42	#18
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Hi Toni, With the Tutorial-AFAOS-OK configuration oddly if I select ppc together with the JIT df0: it works perfectly. The version used for the test is the last 4.0.1 final 64bit Last edited by White; 09 January 2021 at 18:11.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JIT still crash ! Prob found ?!?	Foul	support.FS-UAE	48	22 May 2020 17:19
Crash with JIT and ReSource	mark_k	support.WinUAE	1	14 April 2017 12:48
WB 1.3 BindDrivers crash with JIT	mark_k	support.WinUAE	8	23 April 2012 18:32
Shapeshifter and Fusion crash without JIT enabled	clauddio	support.WinUAE	3	12 March 2012 11:44
Jit Error	CPC464	support.WinUAE	0	19 August 2002 12:12

15 July 2018, 17:07	#4
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,570	JIT crash (bad code, stack overflow etc..). No useful information available. (and if it happens with 3.6.1, why did you post it in 4.0.1 thread?)

16 July 2018, 10:39	#5
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Hi Toni, it happens with version 3.6.1 and also with version 4 If it is useful, what can I post? Thank you.

16 July 2018, 11:06	#6
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,570	All beta threads have same rule, mentioned in first post: only if bug is introduced in same beta series. Old bugs = Always separate thread. What happens if you don't have JIT enabled?

16 July 2018, 11:17	#7
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Toni, with the JIT disabled working, it does not crash with version 3.6.1 I also try with version 4?

16 July 2018, 11:25	#8
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,570	Try also 32-bit version. 32-bit JIT is not same as 64-bit.

16 July 2018, 11:34	#9
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	With the 32bit version I get the same error. Only disabling the JIT works

16 July 2018, 12:28	#10
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,570	What do you mean by "mount df0:"? Insert disk in df0: after booted to WB? Or boot from df0?

16 July 2018, 12:50	#11
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Only when the system is started The boot with the workbench3.1 df0: works without problems Toni, this only happens with this configuration that could be wrong. As I said it could be wrong A new configuration solved this problem.

16 July 2018, 15:09	#12
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,570	Even if config is bad (it looks fine), it still shouldn't crash this way.. First set to windowed mode (easier to test). - Remove harddrive. Still crashing? (if it is, keep HD removed in next tests) - Remove RTG board. Still crashing? - Remove Z3 RAM board. Still crashing? - Remove both RTG and Z3 RAM board. Still crashing?

16 July 2018, 17:12	#13
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Always with the "bad" configuration Removing the .hdf with the JIT activated it works no problem. I also did the other tests for safety, everything works Cd iso and df0: they work

17 July 2018, 08:43	#14
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,570	If removing HDF "fixes" it, it could be something to do with used filesystem(s) in RDB because RDB filesystem is the only code that runs (from HDF) if there is bootable disk in DF0:.

17 July 2018, 11:00	#15
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	Toni, Thanks I look at the .hdf better to see if anything makes it incompatible I'm using sfs / 02 as filesystem, Thanks again.

17 July 2018, 11:28	#16
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,570	Remember to keep backup of the HDF! It may be needed for debugging later.

17 July 2018, 11:32	#17
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	All right, thanks for the advice.

18 July 2018, 16:39	#19
White Registered User Join Date: Sep 2016 Location: italy Posts: 1,480	If it can be useful I attach the used .hdf they are two uncompressed gigabytes already divided into two partitions compressed are 92 megabytes in this case the partitions are empty. Already divided into two Amiga and Work with sfs / 02 filesystem It is ready for the wb3.9 with the boot floppy and is recognized exactly. https://tinyurl.com/y7gn4zt2 thank you.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)