![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2009
Location: N/A
Posts: 962
|
A1200: PCMCIA card does not go in!
Hello, I would like to connect my A1200 to the Internet. I have a wireless PCMCIA card; KCORP Lifestyle KLG-520 802.11g.
However when I try to physically push the card in to the PCMCI slot it get stuck!! It cannot go all the way. I have looked inside the PCMCI slot and it looks good. Is this because only a particular type of PCMCI cards match this particular slot? |
![]() |
![]() |
#2 |
Glastonbridge Software
Join Date: Jan 2012
Location: Edinburgh/Scotland
Posts: 2,243
|
it looks like you've bought a Cardbus card, this is the next generation up from PCMCIA, it is a 32 bit interface and has a different shaped notch on the side to prevent insertion into 16 bit slots.
|
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2009
Location: N/A
Posts: 962
|
Thought it must have been something like that. What cards will work (for Wireless) on an A1200? Ideally the ones that give less problems even from a software perspective?
|
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2005
Location: Skarabörg, Sweden
Age: 45
Posts: 1,029
|
Netgear MA401 works, but you might have update the firmware (in a PC) if you like to use WPA(2).
|
![]() |
![]() |
#5 |
Glastonbridge Software
Join Date: Jan 2012
Location: Edinburgh/Scotland
Posts: 2,243
|
I use a 3COM 3C589D-COMBO but it is not wireless
|
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2009
Location: N/A
Posts: 962
|
Thanks for both replies. I was wondering; would an ethernet connection be feel faster than wireless? Or on an A1200 it does not make a difference if the speed is 11 megabits per second (as the Netgear MA401) or 1 Gbps? I am asking to see if I should buy an ethernet card or a wireless card.
Last edited by Sim085; 13 July 2014 at 20:08. |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2006
Location: Augusta, Georgia, USA
Posts: 552
|
I think either one is much faster than the A1200 card interface and CPU. You will never reach saturation of the network.
|
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2005
Location: Skarabörg, Sweden
Age: 45
Posts: 1,029
|
I don't think there is much speed difference. But if you're going to use WPA(2) you're gonna a need a fast CPU.
|
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2009
Location: N/A
Posts: 962
|
|
![]() |
![]() |
#10 |
Registered User
Join Date: May 2012
Location: Gravesend - UK
Posts: 927
|
You are not going to get a "decent" browsing experience on a normal a1200. I run a 68060 over a wired network and would not call it a decent browsing experience. It's ok for aminet and downloading files from my Nas but most else is painful.
|
![]() |
![]() |
#11 |
Glastonbridge Software
Join Date: Jan 2012
Location: Edinburgh/Scotland
Posts: 2,243
|
yeah i just use mine to FTP to my PC, don't even need to do that now i've got a PCMCIA SD card reader.
|
![]() |
![]() |
#12 |
Registered User
Join Date: Jul 2013
Location: Liverpool
Posts: 2,600
|
http://www.amibay.com/showthread.php...=wireless+card
on a 040/25 is OK for Amiga friendly sites (None/Minimal Flash/CSS) and FTP. |
![]() |
![]() |
#13 | |
Registered User
Join Date: Apr 2009
Location: N/A
Posts: 962
|
Quote:
|
|
![]() |
![]() |
#14 |
Unregistered User
Join Date: Sep 2012
Location: Copenhagen / DK
Age: 44
Posts: 4,190
|
Internet works fine with 3.1. I use AmiTCP but MiamiDX is also very common. I would recommend wired network (but then I always do since it is safer and more stable). I think many WPA2 solutions for the Amiga uses software based encryption which is not very good since a browser already needs all the cpu power you can throw at it. And obviously, you should not use WEP or WPA encryption.
|
![]() |
![]() |
#15 | ||
Registered User
Join Date: Jul 2013
Location: Liverpool
Posts: 2,600
|
Still on 3.0 here.
I use a Wired Card + PC with my 600 Can't browse (no browser for 2.1) But FTP and IRC are fine. Quote:
![]() Quote:
I get about 100-150 K/sec Last edited by Nobby_UK; 15 July 2014 at 23:21. |
||
![]() |
![]() |
#16 |
Registered User
Join Date: Dec 2010
Location: Norway
Posts: 827
|
I made a list of compatible cards some time ago.
|
![]() |
![]() |
#17 | |
Registered User
Join Date: Apr 2009
Location: N/A
Posts: 962
|
Quote:
|
|
![]() |
![]() |
#18 | |
Supernormal
Join Date: Jul 2007
Location: Istanbul / Turkey
Age: 43
Posts: 1,416
|
Quote:
|
|
![]() |
![]() |
#19 |
Registered User
Join Date: Aug 2005
Location: Skarabörg, Sweden
Age: 45
Posts: 1,029
|
To get a decent (there's no CSS capable browser though which works ok on real 68k Amiga) browsing experience i would recommend a gfx board. I believe you want a fast 040 or 060 when using WPA2. I have only tried it using 060.
|
![]() |
![]() |
#20 | |
Supernormal
Join Date: Jul 2007
Location: Istanbul / Turkey
Age: 43
Posts: 1,416
|
Quote:
![]() ![]() By the way. Transfers were really slow on my 060-50 By the way... there is a css capable browser on Amiga AGA. It's Netsurf AGA ![]() |
|
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
PCMCIA ethernet card on the A1200 | Fabie | support.Hardware | 12 | 20 November 2019 16:10 |
PCMCIA network card for a1200/600 | DoogUK | MarketPlace | 17 | 04 February 2009 18:42 |
A1200 PCMCIA GFX Card by GVP | fc.studio | support.Hardware | 5 | 27 July 2007 21:39 |
a1200 pcmcia nic card | Crackersixx | support.Hardware | 11 | 30 September 2006 20:43 |
This PCMCIA card ok for A1200 ? | whiteb | MarketPlace | 2 | 26 October 2003 13:36 |
|
|