12 May 2017, 22:55 | #581 | ||
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,956
|
Quote:
Quote:
|
||
13 May 2017, 00:50 | #582 |
Registered User
Join Date: May 2010
Location: Czech Rep
Posts: 599
|
|
13 May 2017, 00:53 | #583 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,956
|
Quote:
Here's my launch for Amidog's MESS selecting Megadrive/Genesis with game Sonic Code:
stack 500000 mess.exe GENESIS CARTRIDGE SONIC REQUESTER JOYPAD FRAMESKIP 2 RATE 22050 Code:
stack 200000 warpkickstart GENESIS -CARTRIDGE sonic.bin -mess -blithack -sr 22050 Last edited by grelbfarlk; 13 May 2017 at 01:08. |
|
13 May 2017, 01:22 | #584 |
Registered User
Join Date: May 2010
Location: Czech Rep
Posts: 599
|
I have tried GetmodeID but only PC modes are showed. I also tried to change P96 ENV variable ShowModes from Essential to All, and 15bit modes appear too, but also marked PC.
So it seems Radeon driver does not support BigEndian modes. Now I can understand why FPSE cannot use screenmode under Radeon, where Voodoo3 was fine. |
13 May 2017, 01:29 | #585 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,956
|
Quote:
I'm not sure what's going on with AmigaAMP 3.xx. I have 3.18 on the HDD and I launched it once and it bugged since I still had sonnet.library patched External driver. I quit and copied the External driver from my 2.25 install and now I can't select WarpUP version. It still works on 2.25 but for some reason even if I delete AmigaAmp.prefs from ENV: it still will not let me select External driver. Weird. Last edited by grelbfarlk; 13 May 2017 at 01:34. |
|
13 May 2017, 01:39 | #586 |
Registered User
Join Date: May 2010
Location: Czech Rep
Posts: 599
|
here is the debug output:
Looking through all boards installed for Picasso96 -------------------------------------------------- Board 0: Radeon Chip: 3dfx Voodoo DAC: 3dfx Voodoo (internal) RegisterBase: 0x40c06000 MemoryBase: 0x60000000 MemorySize: 33538048 BitsPerCannon: 8 This board supports: following rgb formats: CHUNKY R5G5B5PC R5G6B5PC B8G8R8A8 Y4U2V2 Y4U1V1 hardware sprite, no software sprite buffer, planar and chunky memory exclusive, hardware vblank interrupt can not be caused, User selectable flags: overclocking disabled, memory clock set to 400.0 MHz, big sprite not used, system borderblank used, board is part of the display chain, Bringing board 0 to front for about 2 seconds... ----------------------- and here the history for radeon from latest mediator mmcd update: -------------------- Radeon.card history -------------------- 1.0 (14 Jan 2008) - the first version all 2D functions accelerated in hardware support for the following screen modes: 8-bit (CHANKY) 15-bit PC (R5G5B5PC) 16-bit PC (R5G6B5PC) 32-bit PC (B8G8R8A8) Y4U2V2 Y4U1V1 1.5 (19 May 2008) - new Radeon models added see: http://www.elbox.com/mdg.html NO_MMU mode added 1.6 (15 Jun 2008) - new Radeon models added 1.7 (25 Jul 2008) - new Radeon models added (...) 2.12 (09 Sep 2010) - support for Radeon 9000 series added - adding the Radeon memory to Amiga 3/4000 memory system (...) 2.22 (09 Dec 2014) - acceleration of Draw () function in NO_MMU mode Note: Radeon.card ver.2.12 requires pci.library ver.9.0 as minimum. |
13 May 2017, 01:56 | #587 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,956
|
Quote:
|
|
13 May 2017, 02:23 | #588 |
Registered User
Join Date: Aug 2007
Location: USA
Posts: 365
|
My configuration is A4000D (3640) Buster 11 Mediator 4000DI Black 3.3v and Sonnet 7200. After trying both a Voodoo 3 16 meg card and a Radeon 9250 with every combination of settings I still get freezing mouse pointer and system re-boots every time I try and run anything on the Sonnet card.
Finally I bought an old Powermac 7200/90 on Ebay to test the Sonnet 7200 card with the 64 meg DIMMs that I have. The Sonnet card makes a HUGE difference in the Mac. Now I know the Sonnet card and memory are both good. I am still not sure what is wrong with my Amiga 4000 Mediator A4000DI Sonnet setup. I have also tried (3) different Amiga 4000 power supplies. I have an older 5 volt green mediator setup, should I try that? Thank everyone for their help so far. Hedeon has been a great help. He spent lots of time with me via email. I would really like to get this running. Last edited by Magic; 13 May 2017 at 14:28. |
13 May 2017, 02:50 | #589 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,956
|
Quote:
5V Mediator is a possibility but you'll have to modify your Sonnet card, there's a page on the wiki about that. Does the system freeze and crash with simple command line programs like CyberPI or Dnetc? Also are you sure your 64MB DIMMs are 2k refresh? Put up a pic of them or get the chip part numbers off it. Reason I ask is that the Mac Sonnet driver does support 4k refresh while this one doesn't yet. |
|
13 May 2017, 02:54 | #590 |
Registered User
Join Date: Aug 2007
Location: USA
Posts: 365
|
The system freezes up solid (mouse pointer stops moving) right after the Sonnet memory is added to the system. I can see the memory get added to the title bar on the Workbench screen. This happens anytime I try and run a program that uses the Sonnet card. I have tried Thors 040 libs as well.
|
13 May 2017, 02:55 | #591 |
Registered User
Join Date: May 2010
Location: Czech Rep
Posts: 599
|
And if you use atx-adapter from akit it will not work stable with loaded desktop 4000 unless you modify the adapter and connect multiple 5V lines from psu to that single pin on amiga mobo.
|
13 May 2017, 03:06 | #592 |
Registered User
Join Date: Aug 2007
Location: USA
Posts: 365
|
It sounds like it's time to get the DVOM out and start probing the 5 volt lines. Thanks for the advice
|
13 May 2017, 03:09 | #593 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,956
|
|
13 May 2017, 03:40 | #594 |
Registered User
Join Date: Aug 2007
Location: USA
Posts: 365
|
I have (3) of these modules;
http://www.memoryx.com/apl168b644k1.html P.S. These memory modules work fine in the real Powermac 7200/90 machine if that helps. |
13 May 2017, 03:54 | #595 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,956
|
Quote:
4K refresh. If you can take a high resolution picture of the DIMMs, and I'll check the chips are actually 4k refresh. |
|
13 May 2017, 03:59 | #596 |
Registered User
Join Date: Aug 2007
Location: USA
Posts: 365
|
I'll put one of them on the scanner this weekend when I try it again
|
13 May 2017, 04:11 | #597 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,956
|
|
13 May 2017, 07:38 | #598 | |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,038
|
Quote:
|
|
13 May 2017, 14:12 | #599 |
Registered User
Join Date: Aug 2007
Location: USA
Posts: 365
|
|
13 May 2017, 17:13 | #600 |
Registered User
Join Date: Sep 2015
Location: London, UK
Posts: 419
|
@grelbfarlk: Yep AmigaAMP v2.25 works fine. Thanks for the tip!
@Magic: Have you sent the environment variable VoodooMemOS to Yes? @All: Could someone who has got Warp3D working with a Sonnet on a Voodoo 3 please post their env variables (Mediator, Warp3D, PowerPC, anything else)? Warp3D works for me on 68K but I get recoverable or unrecoverable alerts on PPC depending on the variables I set. I think I am missing something on the PPC side but I'm not sure what. |
Currently Active Users Viewing This Thread: 7 (0 members and 7 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WANTED: PCI Sound Card VORTEX2 SuperQuard / SQ2500 or Turtlebeach SantaCruz pci card | keropi | MarketPlace | 12 | 15 March 2017 02:48 |
Wanted:Sonnet Technologies QuadDoubler 50 (Doubler 4000) | kronuz | MarketPlace | 0 | 16 June 2013 00:29 |
eBay : Sonnet Quaddoubler | alexh | MarketPlace | 3 | 07 May 2013 00:50 |
Overlay problem on GeForce 7200 | Leandro Jardim | support.WinUAE | 1 | 10 August 2010 15:50 |
Prometheus PCI & Voodoo 3 PCI GFX Card | Slayer | support.Hardware | 21 | 05 September 2006 10:57 |
|
|