24 April 2021, 18:09 | #81 |
Registered User
Join Date: Sep 2019
Location: Corfu / Greece
Posts: 410
|
As Hercules said I also think it is a stack problem. Either install stackattack2 or increase stack size on the sysinfo icon.
|
26 April 2021, 04:38 | #82 |
Registered User
Join Date: Sep 2004
Location: Tacoma, WA USA
Age: 52
Posts: 1,927
|
|
09 January 2022, 13:08 | #83 |
Apollo Team
Join Date: May 2014
Location: not far
Posts: 381
|
Hi Geijer,
There is a long lasting but that I would love to see to be phased out : under some circumstances, the SysInfo drive benchmark can fail and will output a bogus result as 6'553'600. Is that any chance for you to fix that and output at least an error message instead of that misleading result ? Thanks in advance Best Regards Last edited by TuKo; 09 January 2022 at 13:13. |
09 January 2022, 13:49 | #84 |
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
Do you know how to trigger that result? Sounds like overflow in calculations. Maybe some JIT magic in some emulation that screws the calculations?
Ahh, sorry, missed that you referred to the disk benchmark. I'm currently reorking that part to support much higher drive speeds... Last edited by Geijer; 10 January 2022 at 17:01. |
09 January 2022, 14:12 | #85 |
Registered User
Join Date: Nov 2016
Location: France
Posts: 856
|
https://d0.se/
Last version v4.4 (11/11/2020) https://sysinfo.d0.se/#Download Last beta v4.5 beta 12 (28/01/2021) https://sysinfo.d0.se/#Beta |
09 January 2022, 14:21 | #86 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,356
|
Still wondering if we can get Super DMAC identification code back into sysinfo?
|
09 January 2022, 14:40 | #87 |
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
|
09 January 2022, 23:23 | #88 |
Registered User
Join Date: Jul 2021
Location: Ostrava
Posts: 58
|
Its possible now to use sysinfo with something other than classil PAL? When i had rtg card, sysinfo was unusable (or with DraCo)
|
10 January 2022, 16:58 | #89 |
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
No, not yet. SysInfo uses PAL/NTSC to produce comparable numbers. We are working on finding a solution but there is a few things that has higher priority right now.
|
10 January 2022, 20:19 | #90 |
Registered User
Join Date: Feb 2017
Location: Denmark
Posts: 1,217
|
It guru's (0x8000000B) on my phase 5 blizzard 1260/50 after showing the main screen (with and without running startup-sequence). Same for v. 4.4 and v. 4.5b12 (also tried some older versions). It works if I disable it (by pressing 2 during boot), but otherwise let e.g. IDEfix run and the reboot).
TBH I haven't done much "modern" (68000+) amiga dev, but if anyone can recommend a decent debugging setup for this I can probably provide better info. |
10 January 2022, 21:29 | #91 |
Registered User
Join Date: Oct 2009
Location: Germany
Posts: 3,308
|
You may have a look at the mmulib archive: http://aminet.net/package/util/libs/MMULib
|
10 January 2022, 22:35 | #92 | |
Registered User
Join Date: Feb 2017
Location: Denmark
Posts: 1,217
|
Quote:
Just to be clear: If I install it and run MuForce I'm supposed to see something useful, right? Because it still crashes in the same way. I know this isn't a support thread for mmulib, just making sure I'm not missing something obvious (Also tried also running MuGuardianAngel and just plain enforcer with the same result). |
|
11 January 2022, 08:40 | #93 | |
Oldtimer
Join Date: Nov 2010
Location: VXO / Sweden
Posts: 153
|
Quote:
daxb is correct, the common solution to Guru 8000000B on '060 CPUs is to use 68060.library. Please try booting from the disk version (dms) from http://sysinfo.d0.se/#Download instead that has a general 68060.library. |
|
11 January 2022, 14:00 | #94 |
Registered User
Join Date: Oct 2009
Location: Germany
Posts: 3,308
|
I was not correct because I was only referring to the debugging setup and not the bug itself.
However, I would recommend to read the docs carefully. Usually debug output is sent to serial and can be captured via cable connected to another computer which runs a software listening to the serial port. Then there is sashimi which can redirect the output to a console window. I usually used this. Next thing you would like to use is SegTracker. |
11 January 2022, 14:25 | #95 |
Registered User
Join Date: Feb 2017
Location: Denmark
Posts: 1,217
|
Thanks guys, I've resolved it, and can now spend the day enjoying my glorious 28 MFlops!
The disk version worked, but showed a yellow fullscreen warning saying "68040 installation alert - do not use 68040.library on a 68060" during startup (also shows up when I tried to fiddle with CPU settings, but only in 4.4). This was the clue I needed. I already had mmulib installed (with 68060.library), but it doesn't (or atleast didn't for me) update 68040.library so I was using version 37.30 of that. Copying in the new version from mmulib allowed me to run both v.4.4 and 4.5b12 from WB. Noticed a few things apart from that: v4.5b12 doesn't show the CPU type (it's correctly displayed as 68060 in v4.4) and both versions shows the FPU type as 68060+68882, don't know if that's intended? (I found a screenshot online of v4.0 that just shows FPU as 68060 for someone else). In the "Drives" screen my PFS partitions show up as either "Not a DOS disk"/"FFS International" respectively. In v4.5b12 if I press "SPEED" and then try to scroll the list libraries list it hangs (I have to hold down ctrl+amiga+amiga to force a reboot), this doesn't happen in 4.4. (NM, I guess this is a known bug) Last edited by paraj; 11 January 2022 at 14:38. |
15 January 2022, 11:43 | #96 |
Apollo Team
Join Date: May 2014
Location: not far
Posts: 381
|
Here is attached a small 4GB HDF booting directly to SysInfo, no geometry or partition fancy, plain FFS.
On WinUAE, it will crash on Drive Benchmark (test without JIC, 020, 040, etc.). |
16 January 2022, 23:16 | #97 |
Apollo Team
Join Date: May 2014
Location: not far
Posts: 381
|
Further testing revealed that there is a div by zero in the drive benchmark located here :
With a quick and dirty patch, that crash can be avoided : Attached all files for that issue and how to quickly fix it. Best would be of course to fix sources. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SYSInfo | Kitty | New to Emulation or Amiga scene | 8 | 22 April 2018 15:59 |
SysInfo 4.0 | Geijer | News | 185 | 13 September 2017 17:32 |
SYSInfo adf | Kitty | request.Apps | 15 | 09 November 2009 12:27 |
SysInfo Sofware | lopos2000 | support.Apps | 2 | 23 July 2005 11:48 |
Sysinfo ? | THX1138 | support.Apps | 4 | 10 November 2003 00:08 |
|
|