|
07 November 2022, 20:18
|
#1 |
|
Registered User
Join Date: Feb 2018
Location: Waterford, Ireland
Posts: 4
|
A4000xt
Hi All
Just became the owner of an A4000XT. Have the until generally up and running but just black screen with I connect a BFG9060. Are there jumpers that need connecting when adding the CPU card Thanks |
|
|
07 November 2022, 20:31
|
#2 |
|
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,881
|
You must select the correct settings for the two clock jumpers when using a CPU card.
The BFG wants both in the INT position. https://gitlab.com/tkurbad/amiga-har...9060/README.md |
|
|
|
09 November 2022, 18:34
|
#3 |
|
Registered User
Join Date: Feb 2015
Location: Sweden
Age: 50
Posts: 2,964
|
To be clear, on a standard A4000D mobo that jumper (Int/ext) is located under the BFG card so you need to remove it to access the jumper.
On A4000TX (i assume its that, not XT) Im not sure if its inte same position… |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
