23 March 2016, 00:35 | #1 |
Registered User
Join Date: Aug 2015
Location: redcar
Posts: 23
|
3.1 kickstart
does anyone know where i can get some cheap 3.0 kick rom chips. i have 3.1 installed in my amiga 1200 but for some reason my gotek floppy emulator wont work with the 3.1 i notice there is some on ebay but they come with no guarantee there working
iv found a site Last edited by smashngrab; 23 March 2016 at 03:25. Reason: found what i was looking for |
23 March 2016, 11:18 | #2 |
Registered User
Join Date: Aug 2009
Location: Dagenham / England
Posts: 182
|
Airey36 on the bay normally test his roms and boards he sells. Does he not have any?
|
23 March 2016, 14:43 | #3 |
We need more scans!
Join Date: Feb 2010
Location: Copenhagen / Denmark
Age: 48
Posts: 326
|
have you tried vesalia and amigakit ?
|
23 March 2016, 15:33 | #4 |
Registered User
Join Date: May 2001
Location: ?
Posts: 19,646
|
I'll trade you my 3.0 for your 3.1 if you're up to that!
|
23 March 2016, 17:35 | #5 |
Registered User
Join Date: Aug 2015
Location: redcar
Posts: 23
|
y i got some coming from amigakit a lot cheaper that ebay as well, sorry akira missed your post had already bought the 3.0 from amigakit
|
26 March 2016, 15:57 | #6 |
Registered User
Join Date: Aug 2015
Location: redcar
Posts: 23
|
Hi anybody know the reason why i removed my 3.1 chips and inserted 2 3.0 one but they dont seen to work
|
26 March 2016, 16:49 | #7 |
Registered User
Join Date: Sep 2007
Location: Stockholm
Posts: 4,344
|
Because you plugged them in the other way around?
|
26 March 2016, 16:51 | #8 |
Registered User
Join Date: Oct 2012
Location: Krypton
Posts: 1,221
|
I take it you have put them in the correct sockets . also I will imagine the chips are old eproms used by Amigakit and my have oxidisation on the chip legs, carefully one at time pull them up and down 1/2 a dozen times to clear the scum,see if that helps.
If after the above still not working throw them back at Akit |
26 March 2016, 23:02 | #9 | |
Global Moderator
Join Date: Aug 2008
Location: Sidcup, England
Posts: 10,300
|
Quote:
You must insert the ROMs each leaving two empty receptacles on the left hand side (i.e., at the PCMCIA end). And Pin 1 of each ROM (marked with a small indented dot) aligns with the second receptable from the left at the front edge of the socket. |
|
26 March 2016, 23:05 | #10 |
PSPUAE DEV
|
|
26 March 2016, 23:35 | #11 |
Registered User
Join Date: Aug 2015
Location: redcar
Posts: 23
|
i did that prowler i followed instructions on youtube but all i get is black and red lines across the screen but its ok when i put the 3.1 chips back in. so im thinking dodgy 3.0 chips
|
28 March 2016, 07:36 | #12 |
Registered User
Join Date: Jun 2013
Location: Australia
Posts: 685
|
3.0 ROMs are definitely intended for A1200?
I noticed on the box that the ROMs are for specific models ie. A4000, I don't know what happens if you mix them. |
28 March 2016, 09:04 | #13 |
R.I.P Smudge 18-08-16
Join Date: Aug 2005
Location: Leicester/UK
Age: 66
Posts: 3,968
|
Good point.
Last edited by Arnie; 01 April 2016 at 10:13. |
30 March 2016, 12:53 | #14 |
PSPUAE DEV
|
A4000D roms work fine in an A1200. Just no SCSI driver for A1200.
From what your describing they sound fried. Definitely putting 514 in U6B and 513 in U6A? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HQC Kickstart 1.2 (cracked kickstart) | T_hairy_bootson | support.Apps | 51 | 18 February 2019 20:25 |
A1200 Kickstart 3.1 - Light gray screen before Kickstart | Sallinen | support.Hardware | 7 | 21 November 2008 21:22 |
Kickstart 2.0 vs. kickstart 3.1 on A600 | fc.studio | support.Hardware | 19 | 21 October 2007 21:03 |
Kickstart 2.05 or 3.1? | Tolismlf | support.Hardware | 19 | 22 November 2004 18:18 |
|
|