English Amiga Board - View Single Post - Reputable pre-configured CF Card won't show up in Kipper2k A508IDE hard disk board

Starglider 2 · 20 May 2015, 06:12

Hi all. After some due diligence and reading the HD sticky in this group, I decided to buy:
- Kipper2k A508IDE HD Fastmem card: http://kipper2k.com/a500fastmem.html
- Amiga 500 4GB partitioned CF card (with WB 3.1 pre-installed): http://www.ebay.com/itm/Amiga-500-60...:X:RTQ:US:1123

I own:
- Amiga 500
- With Kickstart 3.1

With everything installed and the CF card inside the A508IDE, when I boot the A500 using 2 mouse buttons, only DF0: appears. Same if I floppy boot to WB. No HD appears.

"LED1" lights on the A508IDE if the CF card is inserted.
"LED3" also lights if the CF card is removed.

Any ideas?

20 May 2015, 06:12	#1
Starglider 2 Registered User Join Date: Jan 2014 Location: California Posts: 1,146	Reputable pre-configured CF Card won't show up in Kipper2k A508IDE hard disk board Hi all. After some due diligence and reading the HD sticky in this group, I decided to buy: - Kipper2k A508IDE HD Fastmem card: http://kipper2k.com/a500fastmem.html - Amiga 500 4GB partitioned CF card (with WB 3.1 pre-installed): http://www.ebay.com/itm/Amiga-500-60...:X:RTQ:US:1123 I own: - Amiga 500 - With Kickstart 3.1 With everything installed and the CF card inside the A508IDE, when I boot the A500 using 2 mouse buttons, only DF0: appears. Same if I floppy boot to WB. No HD appears. "LED1" lights on the A508IDE if the CF card is inserted. "LED3" also lights if the CF card is removed. Any ideas?