[Mad-Matt]

Ok, I just booted os39, I ran screenmode prefs and pressed test on PicassoIIP 8bit 640x480 which resulted in a 10 second grey screen before returning to aga screen.. and quit uae. Passthrough is enabled in the cgx driver.

The requested lines appear a few times so instead of pasting what I think looks right, i've attached the full log.

Edit2: Just to note, I enabled bootpic in the driver (which loads when drivers are activated in the startup) and this is shown correctly in full colour. In 8bit 640x480 I think but not 100% sure. I guess the driver does this directly and not through the os. When testing with screenmode prefs the bootpic can be seen as a corrupted mess in some modes instead of just a grey screen.

When testing some higher screenmodes like 8bit 1600x1200 (60hz laced) which I believe is highest mode supported on 2mb Picasso2, screenmode prefs reports that it can be opened due to lack of free video ram. The odd effect here is that 1.4mb of my chipmem is eaten up and not returned. This results in the same error if I then try low modes.

EDIT:- Extra Info:
Board (Village Tronic): Prod=2167/11($877/$B) (@$200000 2meg)
cgxsystem.library 42.7 (68K mode)

1 graphics device(s) installed

DEVICES:
PicassoII: Driver Version 4.4 (68K mode)
Prod=2167/11($877/$b)
BaseName=Picasso
CardID=3($3) Number=1($1)
Developed by VillageTronic