Quote:
Originally Posted by MigaTech
The same happens on HDD set-up when the Amiga cannot find an OS or there is problems with the start-up sequence.
|
No, you are completely wrong.
It would just boot to an empty Shell prompt or give some sort of error on the Startup-Sequence.
"NOt a DOS Disk in DF0" means that the disk in DF0 is bad or that the drive is bad. You can get this error with a broken disk drive.
NOTHING to do with the hard drive.
Perhaps the OP has a more serious issue (CIA? Recap?), that made his floppy drive fail.
Did it fail in the same way with floppies, Deksor? Have you recapped the machine?
Quote:
Originally Posted by Deksor
All I did was to upload the 1.05a firmware to the gotek emulator which seemed to work, then I formated the USB key in FAT 32 and then I put the SELECTOR.ADF file at the key's root. I tried with another USB key, but I got the same result.
|
Try FlashFloppy instead of Cortex and see if the same happens.
https://github.com/keirf/FlashFloppy