Quote:
Originally Posted by mfilos
I tonight made the test to the real thing.
1st step:
I burned my custom Kickstart 1.3 + SCSI.device onto a 27C400 Eprom and installed it to one of my A600. Kickstart 1.3 screen booted just fine and really quick.
2nd step:
Mounted an 64MB CF card under WinUAE and booted Install disk of Workbench 2.1 and prepared the CF disk under HDToolbox as a single partition and OFS filesystem.
Then I restarted and booted Workbench 1.3 using the custom Kickstart 1.3+SCSI image under WinUAE and Initialized the HD from the menus. After that, I copied the WB1.3 disk (copy df0: dh0: ALL CLONE).
A restart without floppy under WinUAE got me into Workbench 1.3 just fine!!! (although I had some minor messaged about HD problem - apparently cause I was using IDE0 emulation).
3rd step:
Mounted the CF card into the real A600 and powered on!
Workbench 1.3 booted just fine (with the same error messages that I had on WinUAE as well) but after clicking "Cancel" everything worked!
It was really nice to see WB1.3 via HD on an A600.
Experiment was successful
|
You can use the FFS from 2.1, it works fine.
I dont get any errrors when booting.
I almost have a working bootable HDD, using ACAtune ,
.
Still a Work in progress.