View Single Post
Old 09 May 2021, 01:22   #2
BountyHunter
Registered User

BountyHunter's Avatar
 
Join Date: May 2021
Location: Worcestershire
Posts: 10
I've not used Amiga Explorer but according to the webpage http://www.amigaforever.com/kb/13-105 a null modem cable with full handshaking is required.

Firstly check that your cable is actually a null modem cable and not a straight through serial cable as the two are very different things.

A DB9 -> DB25 null modem cable should have a pin-out like this:



CD = Carrier detect
RxD = Receive Data
TxD = Transmit Data
DTR = Data terminal ready
SG = Signal ground
DSR = Data set ready
RTS = Request to send
CTS = Clear to send
BountyHunter is offline  
 
Page generated in 0.04475 seconds with 11 queries